Mechanism of single centreline grain formation in titanium alloy welds

REFERENCES

• H. Inoue and T. Ogawa: Weld. J., 1995, 74, (1), 21s–27s.
   Google Scholar
• N. N. Prokorov: Weld. Prod. (USSR), 1986, 33, (9), 40–42.
   Google Scholar
• W. A. Baeslack III and Y. Mahajan: Scr. Metall, 1979, 13, (1), 959–964.
   Google Scholar
• W. A. Baeslack III, D. W. Becker, and F. H. Froes: J. Met., 1984, 36, (5), 46–58.
   Google Scholar
• D. L. Hallum and W. A. Baeslack III: Weld. J., 1990, 69, 326s–336s.
   Google Scholar
• J. R. Hartman and W. A. Baeslack III: in ‘Weldability of materials’, (ed. R. A. Patterson and K. W. Mahin), 319–330; 1990, Materials Park, OH, ASM International.
   Google Scholar
• W. F. Savage: Weld. World, 1980, 18, (5)/(6), 89–114.
   Google Scholar
• A. R. Ortega, J. F. Lathrop, R. E. Corderman, E. A. Fuchs, B. V. Hess, K. W. Mahin, and A. F. Giamei: in ‘Modelling of casting, welding and advanced solidification processes VII’, (ed. M. Cross and J. Cambell), 249–256; 1995, Warrendale, PA, the Minerals, Metals and Materials Society.
   Google Scholar
• J. A. Brooks, M. Li, M. I. Baskes, and N. Y. C. Yang: Sci. Technol. Weld. Joining, 1997, 2, (4), 160–166.
   Web of Science ®Google Scholar
• W. A. Baeslack III: in ‘Metallography and interpretation of weld microstructures’, (ed. J. L. McCall et al.), 23–60; 1987, Metals Park, OH, ASM International.
   Google Scholar
• ABAQUS Version 5.4, HKS, Providence, RI, 1994.
   Google Scholar
• J. A. Goldak, A. Chakravarti, and M. J. Bibby: Metall. Trans. B, 1984, 15B, (6), 299–305.
   Web of Science ®Google Scholar
• R. H. Bogaard and J. F. Chaney: ‘Thermal conductivity of Ti–6A1–4V alloy’, HTMIAC Special Report 49, Center for Information and Numerical Data Analysis and Synthesis, Purdue University, West Lafayette, IN, 1992.
   Google Scholar
• P. D. Desai and J. F. Chaney: ‘Thermophysical properties of Ti–6A1–4V alloy’, MIAC Special Report 2, Center for Information and Numerical Data Analysis and Synthesis, Purdue University, West Lafayette, IN, 1992.
   Google Scholar
• J. J. Dike, J. A. Brooks, and J. S. Krafcik: Proc. 4th Int. Conf. on Trends in Welding Research, (ed. H. B. Smartt et al.), 159–164; 1996, Materials Park, OH, ASM International.
   Google Scholar
• J. J. Dike, J. A. Brooks, D. J. Bammann, and M. Li: Proc. 1st European Conf. on Welding and Joining Science and Technology, Madrid, Spain, March 1997, ASM International.
   Google Scholar
• Z. Feng, T. Zacharia, and S. A. David: Proc. 4th Int. Conf. on Trends in Welding Research, (ed. H. B. Smartt et al.), 621–626; 1996, Materials Park, OH, ASM International.
   Google Scholar
• W. Kurz and D. J. Fisher: in ‘Fundamentals of solidification’, 3rd edn, 63–92; 1989, Aedermannsdorf, Trans Tech Publications.
   Google Scholar
• W. A. Baeslack III and C. M. Banas: Weld. J., 1981, 60, (7), 121s–130s.
   Google Scholar
• J. A. Brooks: Proc. 4th Int. Conf. on Trends in Welding Research, (ed. H. B. Smartt et al.), 123–134; 1996, Materials Park, OH, ASM International.
   Google Scholar
• N. Nakagawa, M. Kato, F. Matsuda, and T. Send a: Trans. Jpn Weld. Soc., 1970, 1, (1), 94–103.
   Google Scholar
• S. Kou and Y. Lee: Metall. Trans. A, 1982, 13A, (7), 1141–1152.
   Google Scholar
• M. H. Burden and J. D. Hunt: J. Cryst. Growth, 1974, 22, 99–108.
   Web of Science ®Google Scholar
• M. H. Burden and J. D. Hunt: J. Cryst. Growth, 1974, 22, 109–116.
   Web of Science ®Google Scholar
• J. A. Sarreal and G. J. Abbaschian: Metall Trans. A, 1986, 17A, (11), 2063–2073.
   Google Scholar
• W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall, 1986, 34, 823–830.
   Google Scholar
• R. Trivedi and W. Kurz: Int. Mater. Rev., 1994, 39, (2), 49–74.
   Web of Science ®Google Scholar
• J. W. Elmer: in ‘The metal science of joining’, (ed. M. J. Cieslak et al.), 115–133; 1992, Materials Park, OH, ASM International.
   Google Scholar
• C. V. Thompson and F. Spaepen: Acta Metall, 1983, 31, (12), 2021–2027.
   Google Scholar
• T. B. Massalski: in ‘Binary alloy phase diagrams’, 2nd edn, 226, 3495; 1990, Materials Park, OH, ASM International.
   Google Scholar
• J. A. Brooks and K. W. Mahin: in ‘Welding: theory and practice’, (ed. D. L. Olson et al.), 35–78; 1990, Amsterdam, Elsevier.
   Google Scholar
• M. Rappaz, S. A. David, J. M. Vitek, and L. A. Boatner: Metall Trans. A, 1989, 20A, (6), 1125–1138.
   Google Scholar
• M. Rappaz, S. A. David, J. M. Vitek, and L. A. Boatner: Metall Trans. A, 1990, 21A, (6), 1767–1782.
   Google Scholar
• S. A. David, J. M. Vitek, L. A. Boatner, and M. Rappaz: Mater. Sci. Technol, 1995, 11, (9), 939–947.
   Web of Science ®Google Scholar