Status of Safety and Environmental Activities in the U.S. Fusion Program

REFERENCES

• J. RAEDER, Controlled Nuclear Fusion: Fundamentals of Its Utilization for Energy Supply, John Wiley & Sons, New York (1986).
   Google Scholar
• Energy from Inertial Fusion, International Atomic Energy Agency, Vienna, chapter 6 (1995).
   Google Scholar
• L. C. CADWALLADER, “Chemical Hazards and Safety Issues in Fusion Safety Design,” Fusion Science and Technology, 44, 369 (2003).
   Web of Science ®Google Scholar
• S. REYES, J. F. LATKOWSKI, L. C. CADWALLADER, R. W. MOIR, J. Gomez DEL RIO, and J. SANZ, “Safety Issues of Hg and Pb as IFE Target Materials: Radiological versus Chemical Toxicity,” Fusion Science and Technology, 44, 400 (2003).
   Web of Science ®Google Scholar
• B. J. MERRILL, M. SAWAN, C. P. C. WONG, R. E. NYGREN, L. C. CADWALLADER, S. MALANG, and D.-K. SZE, “Safety assessment of two advanced ferritic steel molten salt blanket design concepts,” Fusion Engineering and Design, 72, 277 (2004).
   Web of Science ®Google Scholar
• G. R. SMOLIK, K. A. MCCARTHY, and V. L. SMITH-WACKERLE, “Characterization of Oxide Breakup by Convective Currents,” Proceedings of the 15th Symposium on Fusion Engineering, October 11-15, 1993, Hyannis, MA, IEEE, 923 (1993).
   Google Scholar
• D. L. HAGRMAN, G. R. SMOLIK, K. A. MCCARTHY and D. A. PETTI, “Volatilization from PCA Steel Alloy,” Fusion Technology, 30, 1442 (1996).
   Web of Science ®Google Scholar
• S. REYES, J. F. LATKOWSKI, J. SANZ, and J. Gomez DEL RIO, “Safety Assessment for Inertial Fusion Energy Power Plants: Methodology and Application to the Analysis of the HYLIFE-II and SOMBRERO Conceptual Designs,” Journal of Fusion Energy, 20, 23 (2001).
   Web of Science ®Google Scholar
• D. E. CULLEN, Users Manual for TART2002: A Coupled Neutron-Photon, 3-D, Combinatorial Geometry, Time Dependent, Monte Carlo Transport Code, UCRL-ID-126455, Revision 4, Lawrence Livermore National Laboratory (2003).
   Google Scholar
• J. SANZ, ACAB98: Activation Code for Fusion Applications. User’s Manual V4.0, UCRL-CR-133040, Universidad Nacional de Educacion a Distancia (UNED) and Lawrence Livermore National Laboratory (1999).
   Google Scholar
• M. E. SAWAN, H. Y. KHATER, and S. J. ZINKLE, “Nuclear Features of the Fusion Ignition Research Experiment (FIRE),” Fusion Engineering and Design, 63-64, 547 (2002).
   Web of Science ®Google Scholar
• D. HENDERSON, L. EL-GUEBALY, P. WILSON, A. ABDOU and the ARIES TEAM, “Activation, Decay Heat, and Waste Disposal Analyses for the ARIES-AT Power Plant,” Fusion Technology, 39, 444 (2001).
   Web of Science ®Google Scholar
• L. A. EL-GUEBALY, D. L. HENDERSON, P. P. H. WILSON, A. E. ABDOU and the ARIES TEAM, “Target Activation and Radiological Response of ARIES-IFE dry wall chamber,” Fusion Engineering and Design, 63-64, 653 (2002).
   Web of Science ®Google Scholar
• R. E. ALCOUFFE et al., DANTSYS 3.0, One-, Two-and Three-dimensional multigroup discrete ordinates transport code system, RSICC computer code collection CCC-547, submitted by Los Alamos National Laboratory (1995).
   Google Scholar
• M. J. SISOLAK, Q. WANG, H. KHATER, and D. HENDERSON, DKR-PULSAR 2.0, a radioactivity calculation code that includes pulsed/intermittent operation, UWFDM-1250, University of Wisconsin Fusion Technology Institute, Madison WI (2004).
   Google Scholar
• P. P. H. WILSON and D. L. HENDERSON, ALARA: Analytic and Laplacian Adaptive Radioactivity Analysis, Volume 1, Technical Manual, UWFDM-1070, University of Wisconsin Fusion Technology Institute, Madison WI (1998).
   Google Scholar
• A. PASHCHENKO et al., FENDL/A-2.0: Neutron activation cross-section data library for fusion applications, INDC(NDS)-173, IAEA Nuclear Data Section (1997).
   Google Scholar
• M. J. GAETA and B. J. MERRILL, CHEMCON User’s Manual Version 3.1, INEL-95/0147, Idaho National Engineering and Environmental Laboratory (1995).
   Google Scholar
• S. REYES, J. F. LATKOWSKI, J. Gomez DEL RIO, and J. SANZ, “Accident Dose Analysis of the SOMBRERO Inertial Fusion Energy Power Plant Design”, Fusion Technology, 39, 941 (2001).
   Web of Science ®Google Scholar
• Osiris and SOMBRERO Inertial Confinement Fusion Power Plant Designs, DOE/ER/54100-1 and DOE/ER/54100-2, by W. J. SHAFER Associates et al., US Department of Energy (1992).
   Google Scholar
• R. O. GAUNTT et al., MELCOR Computer Code Manuals, NUREG/CR-6119, Volume 1, Revision 1, SAND97-2398, US Nuclear Regulatory Commission (1997).
   Google Scholar
• B. J. MERRILL, R. L. MOORE, S. T. POLKINGHORNE, and D. A. PETTI, “Modifications to the MELCOR Code for Application in Fusion Accident Analyses,” Fusion Engineering and Design, 51-52, 555 (2000).
   Web of Science ®Google Scholar
• B.J. MERRILL, “Modeling and Unmitigated Quench Event in an ITER Toroidal Field Magnet,” Fusion Technology, 37, 231 (2000).
   Web of Science ®Google Scholar
• G. R. LONGHURST and R. AMBROSEK, “Verification and Validation of TMAP7,” presented at the 7th International Conference on Tritium Science and Technology, Baden-Baden, Germany, September 12-17, 2004.
   Google Scholar
• J. Gomez DEL RIO, J. SANZ, S. REYES, and J. F. LATKOWSKI, “Parametric Study of Accident Consequences from Different Weather Conditions. Application to IFE Power Plants”, Fusion Technology, 39, 1008 (2001).
   Web of Science ®Google Scholar
• M. L. ABBOTT and A. S. ROOD, “COMIDA: A Radionuclide Food Chain Model for Acute Fallout Deposition,” Health Physics, 66, 17 (1994).
   Web of Science ®Google Scholar
• M. YOUNG and D. CHANIN, “MACCS2 Development and Verification Efforts,” SAND-97-0561C, NRC International MACCS2 User’s Group Meeting, September 16-19, 1996, Portoroz, Slovenia, Sandia National Laboratories (1996).
   Google Scholar
• S. REYES, L. C. CADWALLADER, J. Gomez DEL RIO, J. F. LATKOWSKI, and J. SANZ, “Safety Issues of Beryllium Use in IFE Power Plants,” Proceedings of the 20th IEEE/NPSS Symposium on Fusion Engineering (SOFE), October 14-17, 2003, San Diego, California, IEEE, 260 (2003).
   Google Scholar
• L. C. CADWALLADER, “Identification and Selection of Initiating Events for Experimental Fusion Facilities”, Proceedings of the 13th Symposium on Fusion Engineering, Knoxville, Tennessee, October 2-6, 1989, IEEE, 1103 (1989).
   Google Scholar
• L. C. CADWALLADER and J. F. LATKOWSKI, Preliminary Identification of Accident Initiating Events for Inertial Fusion Energy Power Plant Designs, INEEL/EXT-01-01600, Idaho National Engineering and Environmental Laboratory (2003).
   Google Scholar
• Safety of Magnetic Fusion Facilities – Requirements, DOE-STD-6002-96, U. S. Department of Energy, Washington, DC (1996).
   Google Scholar
• Safety of Magnetic Fusion Facilities – Guidance, DOE-STD-6003-96, U. S. Department of Energy, Washington, DC (1996).
   Google Scholar
• L. C. CADWALLADER and D. A. PETTI, “Safety in the Design of Three Burning Plasma Experiments,” Fusion Science and Technology, 44, 388 (2003).
   Web of Science ®Google Scholar
• J. P. SHARPE, D. A. PETTI, and H.-W. BARTELS, “A review of dust in fusion devices: Implications for safety and operational performance,” Fusion Engineering and Design, 63-64, 155 (2002).
   Web of Science ®Google Scholar
• J. RAPP, P. MONIER-GARBET, and G. F. MATTHEWS, “Reduction of divertor heat load in JET ELMy H-modes using impurity seeding techniques,” Nuclear Fusion, 44, 312 (2004).
   Web of Science ®Google Scholar
• S. REYES, J. F. LATKOWSKI, J. Gomez DEL RIO, and J. SANZ, “Accident Consequences Analysis of the HYLIFE-II Inertial Fusion Energy Power Plant Design,” Nuclear Instruments and Methods in Physics Research A, 464, 416 (2001).
   Web of Science ®Google Scholar
• S. REYES, J. F. LATKOWSKI, J. Gomez DEL RIO, and J. SANZ, “Progress in Accident Analysis of the HYLIFE-II Inertial Fusion Energy Power Plant Design”, Fusion Technology, 39, 946 (2001).
   Web of Science ®Google Scholar
• J. F. LATKOWSKI, S. REYES, G. E. BESENBRUCH, and D. T. GOODIN, “Preliminary Safety Assessment for an IFE Target Fabrication Facility,” Fusion Technology, 39, 960 (2001).
   Web of Science ®Google Scholar
• E. A. MOGAHED, L. EL-GUEBALY, A. ABDOU, P. WILSON, D. HENDERSON and the ARIES TEAM, “Loss of Coolant Accident and Loss of Flow Accident Analysis of the ARIES-AT Design,” Fusion Technology, 39, 462 (2001).
   Web of Science ®Google Scholar
• J. SANZ, O. CABELLOS, S. REYES, and J. F. LATKOWSKI, “Effect of activation cross-section uncertainties in selecting steels for the HYLIFE-II chamber to successful waste management,” presented at the 23rd Symposium on Fusion Technology (SOFT 2004), Venice, Italy, 20-24 September, 2004.
   Google Scholar
• Clearance levels for radionuclides in solid materials, application of exemption principles, interim report for comment, IAEA-TECDOC-855, International Atomic Energy Agency, Viennas (1996).
   Google Scholar
• D. A. PETTI, K. A. MC CARTHY, N. P. TAYLOR, C. B. A. FORTY, and R. A. FORREST, “Reevaluation of the use of low activation materials in waste management strategies for fusion,” Fusion Engineering and Design, 51-52, 435 (2000).
   Web of Science ®Google Scholar
• L. EL-GUEBALY, D. HENDERSON, A. ABDOU, P. WILSON and the ARIES TEAM, “Clearance Issues for Advanced Fusion Power Plants,” Fusion Technology, 39, 986 (2001).
   Web of Science ®Google Scholar
• S. REYES, J. SANZ, and J. F. LATKOWSKI, “Use of Clearance Indexes to Assess Waste Disposal Issues for the HYLIFE-II Inertial Fusion Energy Power Plant Design,” Fusion Engineering and Design, 63-64, 257 (2002).
   Web of Science ®Google Scholar
• M. C. BILLONE, A. R. RAFFRAY, D.-K. SZE, L. EL-GUEBALY and the ARIES TEAM, IFE Structural Materials ARIES Assessment, UCSD-ENG-101, University of California, San Diego (2002).
   Google Scholar
• H. Y. KHATER, E. A. MOGAHED, D.-K. SZE, M. S. TILLACK, and X. R. WANG, “ARIES-ST safety design and analysis,” Fusion Engineering and Design, 65, 285 (2003).
   Web of Science ®Google Scholar
• T. D. MARSHALL, R. J. PAWELKO, R. A. ANDERL, G. R. SMOLIK, B. J. MERRILL, and R. L. MOORE, Air Chemical Reactivity Measurements of the Carbon Fiber Composite NB31, INEEL/EXT-02-00745, Idaho National Engineering and Environmental Laboratory (2002).
   Google Scholar
• S. REYES, J. F. LATKOWSKI, R. P. ABBOTT, W. STEIN, “Simulation of X-Ray Irradiation on Optics and Chamber Wall Materials for Inertial Fusion Energy,” Proceedings of the Third International Conference on Inertial Fusion Sciences and Applications (IFSA), American Nuclear Society, LaGrange Park, IL, 825 (2003).
   Google Scholar
• D. A. PETTI and B. J. MERRILL, “Future US ITER Safety Studies,” these proceedings.
   Google Scholar
• A. C. BELL, P. BALLANTYNE, C. GORDONT, and M. A. WRIGHT, “The safety case for JET D-T operation,” Fusion Engineering and Design, 47, 115 (1999).
   Web of Science ®Google Scholar
• Environmental Assessment, The Tokamak Fusion Test Reactor D-T Modifications and Operations, DOE/EA-0566, US Department of Energy, Washington, DC (1992).
   Google Scholar
• J. S. HERRING, C. P. C. WONG, E. T. CHENG, S. GROTZ and the ARIES TEAM, “Safety in the ARIES tokamak design study,” Proceedings of the IEEE 13th Symposium on Fusion Engineering, October 2-6, 1989, Knoxville, TN, IEEE, 329 (1990).
   Google Scholar
• M. ZUCCHETTI, R. FORREST, C. FORTY, W. GULDEN, P. ROCCO, and S. ROSANVALLON, “Clearance, recycling and disposal of fusion activated material,” Fusion Engineering and Design, 54, 635 (2001).
   Web of Science ®Google Scholar
• J. P. SHARPE, P. W. HUMRICKHOUSE, D. A. PETTI, and T. D. MARSHALL, “Dust in ITER: R&D Needs for Safety Compliance,” presented at the 23rd Symposium on Fusion Technology (SOFT 2004), Venice, Italy, 20-24 September, 2004.
   Google Scholar