11
Views
8
CrossRef citations to date
0
Altmetric
Technical Paper

Pellet Delivery for the Conceptual Inertial Confinement Fusion Reactor Hiball

Pages 2708-2720 | Published online: 09 May 2017

REFERENCES

  • В. BADGER et al., “HIBALL —A Conceptual Heavy Ion Beam Driven Fusion Reactor Study,” KfK-3202/UWFDM-450, Kernforschungszentrum Karlsruhe/University of Wisconsin (1981).
  • R. BOCK, D. BÖHNE, I. HOFMANN, G. KESSLER, G. L. KULCINSKI, J. MEYER-TER-VEHN, I. SVIATOSLAVSKY, and W. F. VOGELSANG, “HIBALL —Conceptual Design Study on a Commercial Size Heavy Ion Beam Fusion Electrical Power Plant,” Proc. 3rd Technical Committee Mtg. Fusion Reactor Design and Technology, Tokyo, Japan, October 5–16, 1981, International Atomic Energy Agency (1981).
  • D. BÖHNE, I. HOFMANN, G. KESSLER, G. L. KULCINSKI, J. MEYER-TER-VEHN, U. VON MÖLLENDORFF, G. A. MOSES, R. W. MÜLLER, I. N. SVIATOSLAVSKY, D. K. SZE, and W. VOGELSANG, “HIBALL —A Conceptual Design Study of a Heavy-Ion Driven Inertial Confinement Fusion Power Plant,” Nucl. Eng. Design, 73, 195 (1982).
  • “Symposium on Accelerator Aspects of Heavy Ion Fusion,” GSI-82-8, Gesellschaft für Schwerionenforschung, Darmstadt (1982).
  • D. BÖHNE, “Heavy Ion Beams for Inertial Confinement Fusion: The HIBALL Scenario,” in Fusion Technology, Proc. 12th Symp. Fusion Technology, Jülich, FRG, September 13–17, 1982, ISBN 0 08 0299776, Pergamon Press, Oxford (1982).
  • R. BOCK, D. BÖHNE, I. HOFMANN, G. KESSLER, G. L. KULCINSKI, J. MEYER-TER-VEHN, U. VON MÖLLENDORFF, G. A. MOSES, R. W. MÜLLER, I. SVIATOSLAVSKY, and W. F. VOGELSANG, “HIBALL —A Conceptual Design Study on a Commercial Size Heavy Ion Beam Fusion Electrical Power Plant,” Proc. Fusion Reactor Design and Technology, Vol. I, IAEA-TC-392/29, p. 497, International Atomic Energy Agency, Vienna (1983).
  • “Studies on the Feasibility of Heavy Ion Beams for Inertial Confinement Fusion,” Annual Report, GSI-83-2, Gesellschaft für Schwerionenforschung, Darmstadt (1983); see also GSI-84-5, Gesellschaft für Schwerionenforschung, Darmstadt (1984).
  • R. R. PETERSON “HIBALL —A Conceptual Heavy Ion Beam Driven Fusion Reactor Study,” KfK-3202/UWFDM-450, Vol. 1, pp. 183–187, Kernforschungszentrum Karlsruhe/University of Wisconsin (1981).
  • Y. S. TOULOUKIAN, R. Q. POWELL, C. Y. HO, and M. C. NICOLAOU, “Thermophysical Properties of Matter,” Thermal Diffusivity, Vol. 10, IFI/Plenum, New York-Washington (1973).
  • H. M. RODER, G. E. CHILDS, R. D. McCARTHY, and P. E. ANGERHOFER, “Survey of the Properties of the Hydrogen Isotopes Below Their Critical Temperatures,” NBS Technical Note 641, National Bureau of Standards (1973).
  • U. VON MÖLLENDORFF “HIBALL-A Conceptual Heavy Ion Beam Driven Fusion Reactor Study,” KfK-3202/UWFDM-450, Vol. 1, pp. 195–200, Kernforschungszentrum Karlsruhe/University of Wisconsin (1981).
  • S. L. MILORA and C. A. FORSTER, “Pneumatic Hydrogen Pellet Injection System for the ISX Tokamak,” Rev. Sci. Instrum., 50, 482 (1979).
  • “Jahresbericht 1980,” Max-Planck-Institut für Plasmaphysik, Garching bei München (1980).
  • “Jahresbericht 1981,” Max-Planck-Institut für Plasmaphysik, Garching bei München (1981).
  • H. SØRENSEN et al., “Injection of Deuterium Pellets,” Fusion Technol., 6, 2, Part 2, 378 (1984).
  • M. J. MONSLER, “Laser Fusion: An Assessment of Pellet Injection, Tracking and Beam Pointing,” Proc. 3rd Topl. Mtg. Technology of Controlled Nuclear Fusion, Santa Fe, New Mexico, May 9–11, 1978, CONF-780508, Vol. 2, p. 1186, available from the National Technical Information Service (1978).
  • R. KREUTZ, “Comparison of Pneumatic and Electromagnetic Pellet Injection for Inertial Confinement Fusion Reactors,” KfK-3466, Kerforschungszentrum Karlsruhe (1983).
  • R. KREUTZ, “Basis and Concepts for the Electromagnetic Acceleration of Pellets for Injection into Inertial Confinement Fusion Reactor Chambers,” KfK-3465, Kernforschungszentrum Karlsruhe (1983).
  • S. C. RAYLEIGH and R. A. MARSHALL, “Electromagnetic Acceleration of Macroparticles to High Velocities,” J. Appl. Phys., 49, 2540 (1978).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.