12
Views
18
CrossRef citations to date
0
Altmetric
Technical Paper

An Alternating Current Tokamak Reactor with Ohmic Ignition and Bootstrap Current

, &
Pages 285-294 | Published online: 09 May 2017

References

  • O. MITARAI, S. W. WOLFE, A. HIROSE, and H. M. SKARSGARD, “Stable AC Tokamak Discharge in the STOR-1M Device,” Bull. Am. Phys. Soc., 6V3, 1337 (1984); see also Nucl. Fusion, 27, 604 (1987).
  • O. MITARAI, S. W. WOLFE, A. HIROSE, and H. M. SKARSGARD, “Alternating Current Tokamak Reactor with Long Pulses,” Fusion Technol., 15, 204 (1989).
  • P. H. REBUT, “Future Plans for JET and Ideas for a Post-JET Machine,” JET-P(89)60, JET Joint Undertaking (Aug. 1989).
  • O. MITARAI, “D-T Spin Polarization Effect on Ohmic Ignition,” IONICS, The Journal of Ion Science and Technology, 170, 21 (1989) (in Japanese); see also O. MITARAI, A. HIROSE, and H. M. SKARSGARD, “Ohmic Ignition in a Tokamak Reactor with Confinement Degradation Effect Due to Alpha Particle Heating,” Laboratory Report PPL-124, University of Saskatchewan (Aug. 1991).
  • S. P. HIRSHMAN, R. J. HAWRYLUK, and B. BIRGE, “Neoclassical Conductivity of a Tokamak Plasma,” Nucl. Fusion, 17, 611 (1977).
  • D. R. COHN, L. BROMBERG, R. J. LECLAIRE, R. E. POTOK, and D. L. JASSBY, “Super High Field Ohmically Heated Tokamak Operation,” Fusion Technol., 10, 1111 (1986).
  • R. CARRERA and E. MONTALVO, “Fusion Ignition Experiment,” Nucl. Fusion, 30, 891 (1988).
  • O. MITARAI, A. HIROSE, and H. M. SKARSGARD, “Ignition Access Condition Based on the Generalized Saddle Point in a Magnetic Fusion Reactor,” Laboratory Report PPL-109, University of Saskatchewan (Feb. 1990); see also Fusion Technol., 20, 208 (1991).
  • O. MITARAI, A. HIROSE, and H. M. SKARSGARD, “Generalized Ignition Contour Map and Scaling Law Requirement for Reaching Ignition in a Tokamak Fusion Reactor,” Nucl. Fusion, 28, 2141 (1988).
  • O. MITARAI, A. HIROSE, and H. M. SKARSGARD, “Generalized Saddle Point Condition for Ignition in a Tokamak Reactor with Temperature and Density Profiles,” Fusion Technol., 16, 197 (1989).
  • F. TROYON, R. GRUBER, H. SAURENMAN, S. SEMENZATO, and S. SUCCI, “MHD-Limit to Plasma Confinements,” Plasma Phys. Controlled Fusion, 26, 209 (1984).
  • J. JOHNER and I. FIDONE, “A Conceptual Steady State Tokamak Reactor with Passive Current Generation,” Nucl. Fusion, 29, 449 (1989).
  • M. J. ALAVA and S. J. KARTTUNEN, “Bootstrap Current Drive by Localized Beat Wave Seeding,” Plasma Physics Controlled Fusion, 32, 1135 (1990).
  • M. N. ROSENBLUTH, R. D. HAZELTINE, and F. L. HINTON, “Plasma Transport in Toroidal Confinement Systems,” Phys. Fluids, 15, 116 (1972).
  • R. S. DEVOTO, M. E. FENSTERMACHER, and A. A. MIRIN, “Modeling of Neutral Beam Current Drive and Bootstrap Effects in a Tokamak Test Reactor,” Nucl. Fusion, 29, 1769 (1989).
  • R. S. DEVOTO, M. E. FENSTERMACHER, B. G. LOGAN, and A. A. MIRIN, “TIBER II Baseline Operation,” Proc. 12th Symp. Fusion Engineering, Monterey, California, October 12–16, 1987, p. 264.
  • O. MITARAI and A. HIROSE, “Model Circuit Analysis for Current Drive Operations in a Tokamak,” Nucl. Fusion, 24, 481 (1984); see also O. MITARAI and A. HIROSE, “Current Drive Operation in a Tokamak,” J. Fusion Energy, 4, 395 (1985).
  • M. KIKUCHI, M. AZUMI, S. TSUJI, K. TANI, and H. KUBO, “Bootstrap Current During Perpendicular Neutral Injection in JT-60,” Nucl. Fusion, 30, 343 (1990).
  • G. APRUZZESE and A. TANGA, “Operational Regime for an Ignited Tokamak Plasma,” JET-P(88)65, JET Joint Undertaking (Oct. 1988).
  • D. A. EHST, K. EVANS Jr., and M. KLASKY, “rf Generation of Stable High Bootstrap Current Equilibria,” Phys. Rev. Lett., 64, 1891 (1990); see also M. KIKUCHI, “Steady State Tokamak Reactor Based on the Bootstrap Current,” Nucl. Fusion, 30, 265 (1990).
  • O. MITARAI, A. HIROSE, and H. M. SKARSGARD, “Density Scaling at the Current Reversal Phase in the STOR-1M Tokamak with AC Operations,” to be submitted.
  • P. C. SCHÜLLER, P. R. THOMAS, A. KELLMAN, E. LAZZARO, P. LOMAS, H. W. PIEKAAR, and A. TANGA, “Plasma Evolution and Skin-Effect in JET,” Proc. 12th European Conf. Controlled Fusion and Plasma Heating, Budapest, Hungary, September 2–6, 1985, p. 287.
  • R. P. PARKER, “High Beta and/or High Field Toka-maks and Stellarators,” J. Fusion Energy, 8, 43 (1989).
  • L. BROMBERG, D. R. COHN, J. SCHULTZ, J. SCHWARTZ, P. TITUS, J. E. C. WILLIAMS, S. P. GROTZ, R. L. CREEDON, C. P. C. WONG, and THE ARIES TEAM, “Magnet Design for the ARIES-I High Field Tokamak Reactor,” PFC/JA-90-30, Massachusetts Institute of Technology Plasma Fusion Center Laboratory (Aug. 1990).
  • P. N. YUSHMANOV, T. TAKIZUKA, K. S. RIEDEL, O. J. W. F. KARDAUN, J. G. CORDEY, S. M. KAYE, and D. E. POST, “Scalings for Tokamak Energy Confinement,” Nucl. Fusion, 30, 1999 (1990).
  • G. A. NAVRATIL et al., “Study of High Poloidal Beta Plasmas in TFTR and DIII-D,” Proc. 13th Int. Conf. Plasma Physics and Controlled Nuclear Fusion Research, Washington, D.C., October 1–6, 1990, IAEA-CN-53/A-3-3, International Atomic Energy Agency.
  • B. COPPI, R. C. ENGLADE, M. NASSI, F. PEGORARO, and L. E. SUGIYAMA, “Current Density Transport, Confinement and Fusion Burn Conditions,” Proc. 13th Int. Conf. Plasma Physics and Controlled Nuclear Fusion Research, Washington, D.C., October 1–6, 1990, IAEA-CN-53/D-4-14, International Atomic Energy Agency.
  • B. COPPI and L. E. SUGIYAMA, “Spatial Inhomogeneity and Time-Dependent Processes in Ignition Experiments,” Comments Plasma Phys. Controlled Fusion, 10, 43 (1986).
  • B. COPPI, “Compact Experiments for α-Particle Heating,” Comments Plasma Phys. Controlled Fusion, 3, 47 (1977).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.