4
Views
9
CrossRef citations to date
0
Altmetric
Plasma-Facing Component

Performance of Graphites and Tungsten during Exposure to Pulsed Plasmas

, , , &
Pages 1852-1857 | Published online: 10 Aug 2017

References

  • A. HASSANEIN, “Erosion and Redeposition of Divertor and Wall Materials During Abnormal Events,” Fusion Technol., 19, 1789(1991).
  • M. BOURHAM et al., “Experimental High Heat Load Surface Damage of Graphite and Refractory Materials,” in Proc. 14th IEEE Symp. Fusion Engineering, San Diego, CA, 1991.
  • A. SESTERO, “Protection of Walls from Hard Disruption in Large Tokamaks,” Nuclear Fusion, 17, 115(1977).
  • M. BOURHAM et al., “Vapor Shielding and Erosion of Surfaces Exposed to High Heat Load in an Electrothermal Accelerator,” IEEE Trans, on Plasma Science, 17, 386 (1989).
  • Q AUCLELLO etal, “Proof-of-Principle Experiment for the Magnetic Vapor Shield Mechanism,” Final Report, DOD Equipment Grant DAAL03-86-G-0157, Nov. 1987.
  • J. GILLIGAN, et al, “Theoretical and Experimental Studies of the Vapor Shielding Mechanism for Surfaces Subject to High Heat Fluxes,” Fusion Technology., 15, 522 (1989).
  • J. GILLIGAN and R. MOHANTI, “Tune Dependent Numerical Simulation of Ablation Controlled Arcs,” IEEE Trans, on Plasma Science, 18, 190(1990).
  • S.Y. WANG et al., “Railgun Bore Material Test Results,” presented at the IEEE 14th International Conf. on Plasma Science, Arlington, VA, June 1-3, 1987, IEEE Catalog No. 87CH2451-3, p.84, 1987.
  • J. L. UPSHAW, “Testing of Coaxial Railgun in High Vacuum,” IEEE Trans, on Magnetics, 22, 1779 (1986).
  • J. GILLIGAN, M. BOURHAM and O. HANKINS, “ET Gun Experiments Relevant to Fusion Disruption Simulation,” DOE PMI/HHF Subtask Group Workshop on Tokamak Disruption Technology, p.292, Santa Fe, NM, July 30-31(1991).
  • J. GILLIGAN, D. HAHN and R. MOHANTI, “Vapor Shielding of Surfaces Subjected to High Heat Fluxes During a Plasma Disruption,” J. Nuclear Materials, 162, 957(1989).
  • R. MOHANTI, J. GILLIGAN and M. BOURHAM, “Time Dependent Simulation of Weakly Nonideal Plasmas in Electrothermal Launchers,” Physics of Fluids B, 3, 3046 (1991).
  • J. GILLIGAN, M. BOURHAM and O. HANKINS, “Ablation and Melting Behavior of Materials in Electrothermal Launchers,” in Proc. 28th JANNAF Combustion Meeting, San Antonio, TX, Oct. 28-Nov. 1, 1991.
  • J. PEDLEY, R. NAYLOR and S. KIRBY, Thermodynamical Data of Organic Compounds, Chapman & Hall, New York (1986).
  • J.G. LAAN et al., “Simulation and Analysis of the Response of Carbon-Fiber Composites and Pyrolytic Graphites to Off-Normal High Heat Loads,” Fusion Technol., 19, 2070(1991).
  • H. BOLT et al., “Performance of Carbon Materials Under Short and Intense Electron Beam Pulses in the JEBIS Facility,” Fusion Technol., 20, 231 (1991).
  • J. GAHL and J. MCDONALD, “Overview of Soviet Plasma Gun Capabilities and Recent Results from the US/USSR Exchange on Disruption Simulations,” DOE PMI/HHF Subtask Group Workshop on Tokamak Disiuption Technology, p.273, Santa Fe, NM, July 30-31(1991).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.