4
Views
1
CrossRef citations to date
0
Altmetric
Technical Note on Cold Fusion

Fractofusion Mechanism

Pages 400-406 | Published online: 09 May 2017

References

  • S. E. JONES et al., “Observation of Cold Nuclear Fusion in Condensed Matter,” Nature, 338, 737 (1989).
  • G. VENKATESWARAN et al., “Burst Neutron Emission and Tritium Generation from a Palladium Cathode Electrolytically Loaded with Deuterium,” Fusion Technol., 18, 60 (1990).
  • Y. ARATA and Y. C. ZHANG, “Achievement of an Intense Cold Fusion Reaction,” Fusion Technol., 18, 95 (1990).
  • P. I. GOLUBNICHII et al., “Detection of Neutrons and Tritium Emitted by a Bulk Palladium Target upon Electrolytic Saturation with Deuterium,” Sov. Tech. Phys. Lett., 16, 77, 826 (1990).
  • D. GOZZI et al., “Evidences for Associated Heat Generation and Nuclear Products Release in Palladium Heavy-Water Electrolysis,” Nuovo Cimento, 103A, 143 (1990).
  • D. LEWIS and K. SKOLD, “A Phenomenological Study of the Fleischmann-Pons Effect,” JElectroanal. Chem., 294, 275 (1990).
  • A. TAKAHASHI et al., “Windows of Cold Nuclear Fusion and Pulsed Electrolysis Experiments,” Fusion Technol., 19, 380 (1991).
  • E. YAMAGUCHI and T. NISHIOKA, “Cold Nuclear Fusion Induced by Controlled Out-Diffusion of Deuterons in Palladium,” Jpn. J. Appl. Phys., 29, L666 (1990).
  • M. BITTNER et al., “Method for Investigation of Fusion Reactions in Condensed Matter,” Fusion Technol., 18, 120 (1990).
  • A. F. PARA et al., “Neutron Monitoring and Related Measurements During Electrolysis of Heavy Water with Palladium and Titanium Cathodes: Activity Report,” Fusion Technol., 18, 131 (1990).
  • Š. MILJANIĆ et al., “An Attempt to Replicate Cold Fusion Claims,” Fusion Technol., 18, 340 (1990).
  • J. N. HARB et al., “Statistical Analysis of Neutron Burst Size and Rate During Electrolysis of LiOD Solutions,” Fusion Technol., 18, 669 (1990).
  • P. G. SONA et al., “Preliminary Tests on Tritium and Neutrons in Cold Nuclear Fusion Within Palladium Cathodes,” Fusion Technol., 17, 713 (1990).
  • M. BITTNER et al., “Evidence for the Production of d-d Fusion Neutrons During Electrolytic Infusion of Deuterons into a Palladium Cylinder,” Fusion Technol., 19, 2119 (1991).
  • T. SATO et al., “Detection of Neutrons in Electrolysis of Heavy Water,” Fusion Technol., 19, 357 (1991).
  • M. BITTNER et al., “Indication for the Temporary Production of Deuteron-Deuteron Fusion Neutrons During Electrolytic Infusion of Deuterons into a Massive Palladium Slab,” Fusion Technol., 20, 334 (1991).
  • D. DUDU et al., “Nuclear Effects in the Electrolysis of Heavy Water,” Rev. Roum. Phys., 34, 229 (1989).
  • C. E. SCOTT et al., “Preliminary Investigation of Possible Low-Temperature Fusion,” J. Fusion Energy, 9, 115 (1990).
  • E. STORMS, “Review of Experimental Observations About the Cold Fusion Effect,” Fusion Technol., 20, 433 (1991).
  • J. W. LANDIS et al., “Cold Fusion Research,” A Report of the Energy Research Advisory Board to the United States Department of Energy (1989).
  • J. S. COHEN and J. D. DAVIES, “Is Cold Fusion Hot?,” Nature, 338, 705 (1989).
  • F. J. MAYER et al., “Nuclear Fusion from Crack-Generated Particle Acceleration,” J. Fusion Energy, 9, 269 (1990).
  • T. TAKEDA and T. TAKIZUKA, “Fractofusion Mechanism,” J. Phys. Soc. Jpn., 58, 3073 (1989).
  • P. I. GOLUBNICHII et al., “A Possible Mechanism for Cold Nuclear Fusion,” Sov. Phys. Dokl., 34, 7, 628 (1989).
  • J. T. DICKINSON et al., “Fracto-Emission from Deuterated Titanium: Supporting Evidence for a Fracto-Fusion Mechanism,” J. Mater. Res., 5, 109 (1990).
  • P. I. GOLUBNICHII et al., “Verification of the Accelerator Model for Low-Temperature Nuclear Fusion,” Sov. Phys. Lebedev Inst. Rep., 9, 16 (1990).
  • V. A. KLYUEV et al., “High-Energy Processes Accompanying the Fracture of Solids,” Sov. Tech. Phys. Lett., 12, 551 (1986).
  • A. G. LIPSON et al., “Neutron Emission During the Mechanical Treatment of Titanium in the Presence of Deuterated Substances,” JETPLett., 49, 675 (1989).
  • S. Y. DONG et al., “Precursors to ‘Cold Fusion’ Phenomenon and the Detection of Energetic Charged Particles in Deuterium/Solid Systems,” Fusion Technol., 20, 330 (1991).
  • B. B. RATH and I. M. BERNSTEIN, “The Relation Between Grain-Boundary Orientation and Intergranular Cracking,” Metall. Trans., 2, 2972 (1971).
  • R. SUHRMANN et al., “Influence of Hydrogen on the Electrical Resistance of Evaporated Palladium Films,” Structure and Properties of Thin Films, p. 268, C. A. NEUGEBAUER et al., Eds. (1959).
  • G. HEINICKE, Tribochemistry, Akademie-Verlag, Berlin (1984).
  • J. HOLZL and F. K. SCHULTE, Solid Surface Physics, p. 1, Springer-Verlag, Berlin (1979).
  • H. CONRAD et al., “Adsorption of Hydrogen on Palladium Single Crystal Surfaces,” Surf. Sci., 41, 435 (1974).
  • Y. MURATA, Hyoumen-Koubunshi to Seidenki, Kyouritsu, Tokyo (1988) (in Japanese).
  • W. R. HARPER, Contact and Frictional Electrification, Oxford University Press (1967).
  • Seidenki Handbook, Ohm-sha, Tokyo (1981) (in Japanese).
  • R. HACKAM and S. K. SALMAN, “Effects of Electrode Curvature, Distance from Glass Insulator, and Addition of Hydrogen on Field-Emission Currents and Breakdown Voltage in Vacuum,” J. Appl. Phys., 45, 10, 4384 (1974).
  • L. B. FREUND, Dynamic Fracture Mechanics, Cambridge University Press (1990).
  • A. KOBAYASHI et al., “Dynamic Crack Propagation in Aluminum Alloys,” Bull. Inst. Space. Aero. Sci., 13, 517 (1977) (in Japanese).
  • N. WADA and K. NISHIZAWA, “Nuclear Fusion in Solid,” Jap. J. Appl. Phys., 28, 11, L2017 (1989).
  • C. CARRARO et al., “Estimates of Cluster-Impact Fusion Yields,” Phys. Rev., A42, 1379 (1990).
  • J. BALEJ and J. DIVISEK, “Energy Balance of D20 Electrolysis with a Palladium Cathode Part 1. Theoretical Relations,” J. Electroanal. Chem., 278, 85 (1989).
  • J. DIVISEK et al., “Energy Balance of D20 Electrolysis with a Palladium Cathode Part 2. Experimental Results,” J. Electroanal. Chem., 278, 99 (1990).
  • J. T. DICKINSON et al., “The Emission of Electrons and Positive Ions from Fracture of Materials,” J. Mater. Sci., 16, 2897 (1981).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.