109
Views
197
CrossRef citations to date
0
Altmetric
Technical Paper

HYLIFE-II: A Molten-Salt Inertial Fusion Energy Power Plant Design — Final Report

, , , , , , , , , , , , , , , & show all
Pages 5-25 | Published online: 09 May 2017

References

  • J. A. BLINK, W. J. HOGAN, J. HOVINGH, W. R. MEIER, and J. H. PITTS, “The High-Yield Lithium-Injection Fusion-Energy (HYLIFE) Reactor,” UCID-53559, Lawrence Livermore National Laboratory (1985).
  • R. J. BURKE et al., “Direct Conversion of Neutron Energy and Other Advantages of a Large Yield Per Pulse, Inertial-Confinement Fusion Reactor,” ENG/CTR/TM-19, Argonne National Laboratory (1974).
  • W. SEIFRITZ and H. NAEGELE, “Uranium and Thorium Shells Serving as Tampers of D-T Fuel Pellets for Electron-Beam-Induced Fusion Approach,” Trans. Am. Nucl. Soc., 21, 18 (1975).
  • M. MONSLER, J. MANISCALCO, J. BLINK, W. MEIER, and P. WALKER, “Electric Power from Laser Fusion: The HYLIFE Concept,” Proc. 13th Intersociety Energy Conversion Engineering Conf., San Diego, California, August 20–25, 1978; see also UCRL-1259, Lawrence Livermore National Laboratory (1978).
  • L. A. GLENN, “Transport Processes in an Inertial Confinement Fusion Reactor,” Nucl. Eng. Des., 64, 375 (1981).
  • R. W. MOIR, M. G. ADAMSON, R. O. BANGERTER, R. L. BIERI, R. H. CONDIT, C. W. HARTMAN, P. A. HOUSE, A. B. LANGDON, B. G. LOGAN, C. D. ORTH, R. W. PETZOLDT, J. H. PITTS, J. H. POST, R. F. SACKS, M. T. TOBIN, W. H. WILLIAMS, T. J. DOLAN, G. R. LONGHURST, M. A. HOFFMAN, V. E. SCHRöCK, P. F. PETERSON, R. Y. BAI, X. M. CHEN, J. LIU, D. K. SZE, and W. R. MEIER, “HYLIFE-II Progress Report,” UCID-21816, Lawrence Livermore National Laboratory (1991).
  • R. W. MOIR, “HYLIFE-II Inertial Fusion Energy Power Plant Design,” Fusion Technol., 21, 1475 (1992).
  • M. W. ROSENTHAL, P. N. HAUBENREICH, and R. B. BRIGGS, “The Development Status of Molten-Salt Breeder Reactors,” ORNL-4812, Oak Ridge National Laboratory (1972).
  • J. G. DELENE, “Updated Comparison of Economics of Fusion Reactors,” Fusion Technol., 19, 807 (1991).
  • P. A. HOUSE, “HYLIFE-II Reactor Chamber Mechanical Design,” Fusion Technol., 21, 1487 (1992).
  • R. W. PETZOLDT, “Oscillating Liquid Flow in ICF Reactors,” Fusion Technol., 19, 758 (1991).
  • X. M. CHEN and V. E. SCHRöCK, “A Note on the Pressure Field Within an Outward Moving Free Annulus,” Fusion Technol., 19, 727 (1991).
  • X. M. CHEN and V. E. SCHRöCK, “The Pressure Relaxation of Liquid Jets After Isochoric Heating,” Fusion Technol., 19, 721 (1991).
  • X. M. CHEN, V. E. SCHRöCK, and P. F. PETERSON, “Hydraulic Analysis of Flibe Jets in a HYLIFEII ICF Reactor,” Fusion Technol., 21, 1531 (1992).
  • X. M. CHEN, V. E. SCHRöCK, and P. F. PETERSON, “Gas Dynamics in the Central Cavity of HYLIFE-II Reactor,” Fusion Technol., 21, 1520 (1992).
  • J. C. LIU, P. F. PETERSON, and V. E. SCHRöCK, “Blast Venting Through Blanket Material in the HYLIFEICF Reactor,” Fusion Technol., 21, 1514 (1992).
  • M. A. HOFFMAN and Y. T. LEE, “Improved HYLIFE-II Heat Transport System and Steam Power Plant: Impact on Performance and Cost of Electricity,” UCRL-ID-113266, Lawrence Livermore National Laboratory (1992).
  • W. R. MEIER and R. L. BIERI, “Economic Modeling and Parametric Studies for OSIRIS-A HIB-Driven IFE Power Plant,” Fusion Technol., 21, 1547 (1992).
  • M. A. HOFFMAN and Y. T. LEE, “Performance and Cost of the HYLIFE-II Balance of Plant,” Fusion Technol., 21, 1557 (1992).
  • G. R. LONGHURST and T. J. DOLAN, “Tritium Permeation Losses in HYLIFE-II Heat Exchanger Tubes,” Fusion Technol., 19, 820 (1991).
  • T. J. DOLAN, G. R. LONGHURST, and E. GARCIAOTERO, “Vacuum Disengager Design for Tritium Removal from Flibe in the HYLIFE-II Reactor,” Fusion Technol., 21, 1949 (1992).
  • W. J. BRYNDA, C. H. SCARLETT, G. E. TANGUAY, and P. R. LOBNER, “Nonreactor Nuclear Facilities,” BNL-51444, Rev. 1, p. 1, Brookhaven National Laboratory (1986).
  • D. L. SMITH et al., “Blanket Comparison and Selection Study-Final Report,” ANL/FPP-84-1, Argonne National Laboratory (1984).
  • X. M. CHEN, P. F. PETERSON, and V. E. SCHRöCK, “The Calculation of the Kinetic Rate Constants for LiF and BeF2,” Fusion Technol., 21, 1536 (1992).
  • D. H. BERWALD and S. ZENCZAK, “Assessment of Beryllium Resources for Fusion Applications,” Fusion Technol., 8, 1143 (1985).
  • R. O. BANGERTER, “Targets for Heavy-Ion Fusion,” Fusion Technol., 13, 349 (1988).
  • R. W. MOIR, “HYLIFE-II Inertial Confinement Fusion Power Plant Design,” Fusion Technol., 19, 617 (1991).
  • R. O. BANGERTER, J.W.-K. MARK, and G. MAGELSSEN, “Simple Target Models for Ion Beam Fusion Systems Studies,” UCID-20578, Lawrence Livermore National Laboratory (1985).
  • M. T. TOBIN, “Neutronic Analysis for HYLIFE-II,” Fusion Technol., 19, 763 (1991).
  • J. G. WOODWORTH, Lawrence Livermore National Laboratory, Private Communication (1990).
  • Special Issue on Heavy-Ion Fusion, Fusion Technol., 13, 189 (1988).
  • R. L. BIERI, “Parametric Studies for a HYLIFE-II Electric Power Plant,” Fusion Technol., 19, 752 (1991).
  • R. L. BIERI and W. R. MEIER, “Heavy Ion Driver Parametric Studies and Choice of a Base 5-Mega-Joule Driver Design,” Fusion Technol., 21, 1589 (1992).
  • J. J. BARNARD, A. L. BROOKS, J. P. CLAY, F. E. COFFIELD, F. J. DEADRICK, L. V. GRIFFITH, A. R. HARVEY, D. L. JUDD, H. C. KIRBIE, V. K. NEIL, M. A. NEWTON, A. C. PAUL, L. L. REGINATO, G. E. RUSSELL, W. M. SHARP, H. D. SHAY, J. H. WILSON, and S. S. YU, “Study of Recirculating Induction Accelerators as Drivers for Heavy Ion Fusion,” UCRL-LR-108095, Lawrence Livermore National Laboratory (1992).
  • R. W. MOIR, J. H. HAMMER, C. W. HARTMAN, R. L. LEBER, G. B. LOGAN, R. W. PETZOLDT, M. TABAK, M. T. TOBIN, R. L. BIERI, and M. A. HOFFMAN, “Inertial Fusion Energy Power Plant Design Using the Compact Torus Accelerator: HYLIFE-CT,” Fusion Technol., 21, 1492 (1992).
  • C. W. HARTMAN, J. L. EDDLEMAN, J. H. HAMMER, G. B. LOGAN, H. S. MCLEAN, R. W. MOIR, and A. W. MOLVIK, “Inertial Confinement Fusion Using the Compact Torus Accelerator,” Fusion Technol., 20, 776 (1991).
  • B. BADGER et al., “HIBALL-II —An Improved Conceptual Heavy Ion Beam Driven Fusion Reactor Study,” UWFDM-625, University of Wisconsin (1984).
  • R. W. MOIR, “Heavy Ion Beam and Reactor Chamber Interface Design,” Part. Accel., 37–38, 459 (1992).
  • A. B. LANGDON, “Reactor Chamber Propagation of Heavy Ion Beams,” Part. Accel., 37–38, 175 (1992).
  • R. Y. BAI and V. E. SCHRöCK, “An Approximate Method for Analyzing Transient Condensation on Spray in HYLIFE-II,” Fusion Technol., 19, 732 (1991).
  • V. E. SCHRöCK, H. JIN, and P. F. PETERSON, “Spray Condensation System for HYLIFE-II,” UCB-NE-4193, University of California-Berkeley (1992).
  • “ASME Boiler and Pressure Vessel Code, Sec. Ill, Subsection NCA, Rules for Construction of Nuclear Power Plant Components,” American Society of Mechanical Engineers (1989).
  • J. D. LEE, “Waste Disposal Assessment of HYLIFE-II Structure,” UCRL-JC-111589, Lawrence Livermore National Laboratory (1993); submitted to Fusion Technol.
  • J. R. KEISER, J. H. DEVAN, and E. J. LAWRENCE, “Compatibility of Molten Salts with Type 316 Stainless Steel and Lithium,” J. Nucl. Mater., 85–86, 295 (1979).
  • X. M. CHEN, P. F. PETERSON, and V. E. SCHRöCK, “The Influence of Gas Radiation on the Gas Dynamics Inside the Central Cavity of HYLIFE-II,” UCBNE-4195, University of California-Berkeley (1992).
  • A. SEARCY, University of California-Berkeley, Private Communication (1991).
  • K. HIJIKATA and N. HIMENO, “Condensation of Azeotropic and Nonazeotropic Binary Vapor Mixtures,” Annual Review of Heat Transfer, Vol. 3, p. 39, C. L. TIEN, Ed., Hemisphere, Washington, D.C. (1990).
  • T. J. DOLAN and G. R. LONGHURST, “Safety and Environmental Aspects of HYLIFE-II,” Fusion Technol., 19, 1392 (1991).
  • P. A. HOUSE, “HYLIFE-II Reactor Chamber Mechanical Design: Update,” UCRL-ID-109429, Lawrence Livermore National Laboratory (1992).
  • G. R. LONGHURST and T. J. DOLAN, “HYLIFE-II Tritium Management System,” EGG-FSP-9971, Idaho National Engineering Laboratory (1992).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.