Magnetohydrodynamic Flows in Arbitrary Geometries in Strong, Nonuniform Magnetic Fields — A Numerical Code for the Design of Fusion Reactor Blankets

References

• D. L. SMITH et al., “Blanket Comparison and Selection Study,” Fusion Technol., 8, 10 (1985).
   Web of Science ®Google Scholar
• S. MALANG et al., “Self-Cooled Liquid Metal Blanket Concept,” Fusion Technol., 14, 1343 (1988).
   Google Scholar
• S. MALANG et al., “Dual Coolant Liquid Metal Breeder Concept,” Proc. 17th Symp. on Fusion Technology (SOFT), Rome, Italy, September 14–18, 1992 (1993).
   Google Scholar
• Y. SEVERI et al., “Design and Neutronic Evaluation of a Box Configuration for a Water-Cooled Lithium-Lead Blanket for DEMO,” Proc. 16th Symp. on Fusion Technology (SOFT), London, United Kingdom, September 3–7, 1990 (1991).
   Google Scholar
• T. N. AITOV, A. I. KALYUTIK, and A. V. TANANAEV, “Numerical Investigation of Three-Dimensional MHD Flow in a Curved Channel of Rectangular Cross Section,” Magnetohydrodynamics, 4, 458 (1978).
   Google Scholar
• A. STERL, “Numerical Simulation of Liquid-Metal MHD Flows in Rectangular Ducts,” J. Fluid Mech., 216, 161 (1990).
   Web of Science ®Google Scholar
• C. N. KIM, A. H. HADID, and M. A. ABDOU, “Development of a Computational Method for the Full Solution of MHD Flow in Fusion Blankets,” Fusion Eng. Des., 8, 265 (1989).
   Web of Science ®Google Scholar
• T. KUNUGI, M. S. TILLACK, and M. A. ABDOU, “Analysis of Liquid Metal MHD Fluid Flow and Heat Transfer Using the KAT Code,” Fusion Technol., 19, 1000 (1991).
   Google Scholar
• R. J. HOLROYD and J. T. D. MITCHEL, “Liquid Lithium as a Coolant for Tokamak Reactors,” Nucl. Eng. Des./Fusion, 1, 17 (1984).
   Web of Science ®Google Scholar
• J. S. WALKER, “Magnetohydrodynamic Flows in Rectangular Ducts with Thin Conducting Walls,” J. Mecanique, 20, I, 79 (1981).
   Google Scholar
• A. G. KULIKOVSKII, “Slow Steady Flows of a Conducting Fluid at Large Hartmann Numbers,” Fluid Dyn., 3, 1 (1968).
   Google Scholar
• T. Q. HUA and J. S. WALKER, “MHD Flow in Insulating Circular Ducts for Fusion Blankets,” Fusion Technol., 15, 699 (1989).
   Web of Science ®Google Scholar
• L. BÜHLER, “Magnetohydrodynamische Strömungen flüssiger Metalle in allgemeinen dreidimensionalen Geometrien unter der Einwirkung starker, lokal variabler Magnet-felder,” KfK-5095, Kernforschungszentrum Karlsruhe (1993).
   Google Scholar
• J. S. WALKER and G. S. S. LUDFORD, “MHD Flow in Conducting Circular Expansions with Strong Magnetic Fields,” Int. J. Eng. Sci., 12, 193 (1974).
   Web of Science ®Google Scholar
• J. S. WALKER and G. S. S. LUDFORD, “MHD Flow in Insulated Circular Expansions with Strong Magnetic Fields,” Int. J. Eng. Sci., 12, 1045 (1974).
   Web of Science ®Google Scholar
• J. A. SHERCLIFF, “Magnetohydrodynamic Pipe Flow Part 2: High Hartmann Number,” J. Fluid Mech., 13, 513 (1962).
   Web of Science ®Google Scholar
• R. R. GOLD, “Magnetohydrodynamic Pipe Flow Part 1: High Hartmann Number,” J. Fluid Mech., 13, 505 (1962).
   Web of Science ®Google Scholar
• C. CHANG and S. LUNDGREN, “Duct Flow in Magnetohydrodynamics,” ZAMP XII, p. 100 (1961).
   Google Scholar
• U. BURR, “Wärmeübertragung in dreidimensionalen magnetohydrodynamischen Strömungen,” Thesis, Karlsruhe University (1994).
   Google Scholar
• N. B. MORLEY, M. S. TILLACK, and M. A. ABDOU, “Development of an Analytic Core Flow Approximation for a Square Duct in an Oblique Magnetic Field,” UCLA-FNT-46, University of California-Los Angeles (1991).
   Google Scholar
• S. MOLOKOV and A. SHLSHKO, “Fully Developed Magnetohydrodynamic Flows in Rectangular Ducts with Insulating Walls,” KfK-5247, Kernforschungszentrum Karlsruhe (1993).
   Google Scholar
• M. S. TILLACK and C. A. MCCARTHY, “Flow Quantities in Side Layers,” UCLA-FNT-89-01, University of California-Los Angeles (1989).
   Google Scholar
• H. MADARAME and T. HAGIWARA, “Computer Code for Analyzing Liquid Metal MHD Flow in Rectangular Duct Under Strong Transverse Magnetic Field,” Fusion Eng. Des., 8, 167 (1989).
   Web of Science ®Google Scholar
• J. S. WALKER, “Liquid Metal Flow Through a Thin Walled Elbow in a Plane Perpendicular to a Uniform Magnetic Field,” Int. J. Eng. Sci., 24, 1741 (1986).
   Web of Science ®Google Scholar
• S. MOLOKOV, “Liquid Metal Flows in Manifolds and Expansions of Insulating Rectangular Ducts in the Plane Perpendicular to a Strong Magnetic Field,” KfK-5272, Kernforschungszentrum Karlsruhe (1994).
   Google Scholar
• K. A. MCCARTHY, A. v. VINO, N. B. MORLEY, and M. A. ABDOU, “Comparison of the Core Flow Approximation and Full Solution Approach for MHD Flow in Non-Symmetric and Multiple Ducts,” Fusion Eng. Des., 17, 209 (1990).
   Web of Science ®Google Scholar
• S. MOLOKOV, “Fully Developed Liquid-Metal Flow in Multiple Rectangular Ducts in a Strong Magnetic Field,” Eur. J. Mech., B/Fluids, 12, 6, 769 (1993).
   Web of Science ®Google Scholar
• T. Q. HUA and B. F. PICOLOGLOU, “Magnetohydrodynamic Flow in a Manifold and Multiple Rectangular Coolant Ducts of Self-Cooled Blankets,” Fusion Technol., 19, 102 (1991).
   Web of Science ®Google Scholar
• T. Q. HUA and J. S. WALKER, “MHD Considerations for Poloidal-Toroidal Coolant Ducts of Self-Cooled Blankets,” Fusion Technol., 19, 951 (1991).
   Google Scholar
• R. STIEGLITZ, “Magnetohydrodynamische Stromungen in parallelen Rechteckkanalen mit Umlenkungen,” Dissertation, Karlsruhe University (1994).
   Google Scholar
• L. BÜHLER, “Liquid Metal Flow in Arbitrary Thin-Walled Channels Under a Strong Transverse Variable Magnetic Field,” Fusion Eng. Des., 17, 215 (1991).
   Web of Science ®Google Scholar
• S. MOLOKOV and L. BÜHLER, “Liquid Metal Flow in a U-Bend in a Strong Uniform Magnetic Field,” J. Fluid Mech., 267, 325 (1994).
   Web of Science ®Google Scholar