22
Views
7
CrossRef citations to date
0
Altmetric
Technical Paper

Japan Atomic Energy Research Institute/United States Integral Neutronics Experiments and Analyses for Tritium Breeding, Nuclear Heating, and Induced Radioactivity

, , , , , , , , , & show all
Pages 5-38 | Published online: 09 May 2017

References

  • E. BERTOLINI, “Impact of JET Experimental Results and Engineering Development on the Definition of the ITER Concept,” Fusion Eng. Des., 27, 27 (1995).
  • D. MEADE, “TFTR Experience with DT Operation,” Fusion Eng. Des., 27, 17 (1995).
  • P.H. REBUT, “Detail of ITER Outline Design,” Fusion Eng. Des., 28 (1995).
  • T. NAKAMURA et al., “Fusion Neutron Source (FNS),” Proc. 3rd Symp. Accelerator Science and Technology, Osaka, Japan, August 27-29, p. 55, Osaka University (1980).
  • T. NAKAMURA and M.A. ABDOU, “Summary of Recent Results from the JAERI/U.S. Fusion Neutronics Phase I Experiments,” Fusion Technol., 10, 541 (1986).
  • M. NAKAGAWA, T. MORI, K. KOSAKO, et al., “JAERI/US Collaborative Program on Fusion Neutronics — Phase-I Fusion Integral Experiments, Analysis,” JAERI-M 88-177, Japan Atomic Energy Research Institute (1988); UCLA-ENG-88-15, University of California at Los Angeles (1988).
  • Y. OYAMA et al., “Phase-IIA and -IIB Experiments of JAERI/USDOE Collaborative Program on Fusion Blanket Neutronics,” JAERI-M 89-154, Japan Atomic Energy Research Institute (1989).
  • M. NAKAGAWA, T. MORI, K. KOSAKO, Y. OYAMA, and T. NAKAMURA, “JAERI/USDOE Collaborative Program on Fusion Blanket Neutronics —Analysis of Phase-IIA and -IIB Experiments,” JAERI-M 89-154, Japan Atomic Energy Research Institute (1989).
  • M.Z. YOUSSEF, M.A. ABDOU, Y. WATANABE, and P.M. SONG, “US/JAERI Collaborative Program on Fusion Neutronics —Phase-IIA and -IIB Fusion Integral Experiments, the US Analysis,” UCLA-ENG-90-14 FNT-31, University of California at Los Angeles (1989).
  • Y. OYAMA et al., “Measured Characteristics of Be Multi-Layered and Coolant Channel Blankets: Phase IIC Experiments of the JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1955 (1991).
  • M.Z. YOUSSEF, A. KUMAR, M. ABDOU, M. NAKAGAWA, K. KOSAKO, Y. OYAMA, and T. NAKAMURA, “Analysis for Heterogeneous Blankets and Comparison to Measurements: Phase IIC Experiments of the USDOE/JAERI Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1891 (1991).
  • T. NAKAMURA et al., “A Line D-T Neutron Source Facility for Annular Blanket Experiment: Phase III of the JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1873 (1991).
  • C. KONNO et al., “Measurements of the Source Term for Annular Blanket Experiment with a Line Source: Phase IIIA of JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1885 (1991).
  • H. MAEKAWA and M.A. ABDOU, “Overview of Latest Experiments under the JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fus. Eng. Des., 18, 275 (1991).
  • Y. IKEDA et al., “Measurement and Analysis of Nuclear Heat Depositions in Structural Materials Induced by D-T Neutrons,” Fusion Technol., 21, 2190 (1992).
  • A. KUMAR, M. YOUSSEF, Y. IKEDA, C. KONNO, and Y. OYAMA, “Experiments and Analysis for Measurements of Decay Heat Related Induced Activities in Simulated Line Source Driven D-T Neutron Fields of Phase IIIA: USDOE/JAERI Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1859 (1991).
  • Y. IKEDA, C. KONNO, Y. OYAMA, T. NAKAMURA, A. KUMAR, M.Z. YOUSSEF, and M.A. ABDOU, “Experimental Verification of Current Data and Methods for Induced Radioactivity and Decay Heat Calculation in D-T Fusion Reactors,” Fus. Eng. Des., 18, 387 (1991).
  • Y. IKEDA and M.Z. YOUSSEF, “Two-Dimensional Cross-Section Sensitivity and Uncertainty Analysis for Tritium Production Rate in Fusion-Oriented Integral Experiments,” Fusion Technol., 13, 616 (1988).
  • Y. OYAMA, K. TSUDA, S. YAMAGUCHI, Y. IKEDA, C. KONNO, H. MAEKAWA, and T. NAKAMURA, “Phase II Experimental Results of JAERI/USDOE Collaborative Program on Fusion Blanket Neutronics Experiments,” Fus. Eng. Des., 9, 309 (1989).
  • M.Z. YOUSSEF, Y. WATANABE, M.A. ABDOU, M. NAKAGAWA, T. MORI, K. KOSAKO, and T. NAKAMURA, “Comparative Analysis for Phase IIA and IIB Experiments of the U.S./JAERI Collaborative Program on Fusion Blanket Neutronics,” Fusion Technol., 15, 1299 (1989).
  • Y. OYAMA et al., “Phase-IIC Experiments of the US-DOE/JAERI Collaborative Program on Fusion Blanket Neutronics —Experiments and Analysis of the Heterogeneous Fusion Blankets, Volume I: Experimental Results,” JAERI-M-92-182, Japan Atomic Energy Research Institute (Dec. 1992); see also UCLA-FNT-63, UCLA-ENG-93-18, University of California at Los Angeles (Dec. 1992).
  • M.Z. YOUSSEF et al., “Phase-IIC Experiments of the USDOE/JAERI Collaborative Program on Fusion Blanket Neutronics-Experiments and Analysis of the Heterogeneous Fusion Blankets, Volume II: Analysis,” UCLA-FNT-64, UCLA-ENG-93-19, University of California at Los Angeles (Dec. 1992); see also M. NAKAGAWA et al., JAERI-M-92-183, Japan Atomic Energy Research Institute (Dec. 1992).
  • M.Z. YOUSSEF, Y. WATANABE, A. KUMAR, Y. OYAMA, and K. KOSAKO, “Analysis for the Simulation of a Line Source by a 14 MeV Moving Point Source and Impact on Blanket Characteristics: The USDOE/JAERI Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1843 (1991).
  • Y. OYAMA et al., “Phase III Experimental Results of JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fus. Eng. Des., 18, 203 (1991).
  • M. NAKAGAWA et al., “Characteristics of a Deuterium-Tritium Fusion Source on Rotating Target Used in Simulated Fusion Blanket Experiments,” Fusion Technol., 28, 39 (1995).
  • Y. OYAMA et al., “Design and Techniques for Fusion Blanket Neutronics Experiments Using an Accelerator-Based Deuterium-Tritium Neutron Source,” Fusion Technol., 28, 56 (1995).
  • Y. IKEDA et al., “Measurements and Analyses of Decay Radioactivity Induced in Simulated Deuterium-Tritium Neutron Environments for Fusion Reactor Structural Materials,” Fusion Technol., 28, 74 (1995).
  • A. KUMAR et al., “Decay Radioactivity Induced in Plasma-Facing Materials by Deuterium-Tritium Neutrons,” Fusion Technol., 28, 99 (1995).
  • Y. IKEDA et al., “Direct Nuclear Heating Measurements and Analyses for Structural Materials Induced by Deuterium-Tritium Neutrons,” Fusion Technol., 28, 156 (1995).
  • A. KUMAR et al., “Direct Nuclear Heating Measurements and Analyses for Plasma-Facing Materials,” Fusion Technol., 28, 173 (1995).
  • Y. OYAMA et al., “Neutronics Integral Experiments of Lithium-Oxide Fusion Blanket with Heterogeneous Configurations Using D-T Neutrons,” Fusion Technol., 28, 216 (1995).
  • M. YOUSSEF et al., “Nuclear Analysis of Integral Experiments on a Li20 Test Assembly with Local Heterogeneities Utilizing a 14-MeV Neutron Source,” Fusion Technol., 28, 243 (1995) (in press).
  • C. KONNO et al., “Neutronics Integral Experiments of Simulated Fusion Reactor Blanket with Various Beryllium Configurations Using Deuterium-Tritium Neutrons,” Fusion Technol., 28, 273 (1995) (in press).
  • H. MAEKAWA et al., “A Summary of Benchmark Experiments for Simulation of Fusion Reactors Using an Annular Blanket with a Line Deuterium-Tritium Source,” Fusion Technol., 28, 296 (1995) (in press).
  • Y. OYAMA et al., “Concept and Characteristics of a Simulated Line Source for Annular Blanket Experiments Using an Accelerator-Based Deuterium-Tritium Neutron Source,” Fusion Technol., 28, 305 (1995) (in press).
  • M. YOUSSEF et al., “The Nuclear Analysis of an Annular Li20 Blanket System Surrounding an Artificially Simulated 14-MeV Line Source and Comparison of Calculations to Measurements,” Fusion Technol., 28, 320 (1995) (in press).
  • C. KONNO et al., “Neutronics Integral Experiments of Annular Blanket System Simulating Tokamak Reactor Configuration,” Fusion Technol., 28, 347 (1995) (in press).
  • M. YOUSSEF et al., “Fusion Integral Experiments and Analysis and the Determination of Design Safety Factors — I: Methodology,” Fusion Technol., 28, 366 (1995) (in press).
  • M. YOUSSEF et al., “Fusion Integral Experiments and Analysis and the Determination of Design Safety Factors — II: Application to the Prediction Uncertainty of Tritium Production Rate from the U.S. DOE/JAERI Collaborative Program on Fusion Blanket Neutronics,” Fusion Technol., 28, 388 (1995) (in press).
  • M.A. ABDOU, “Radiation Considerations for Superconducting Fusion Magnets,” J. Nucl. Mater., 72, 147 (Mar. 1978).
  • M.A. ABDOU, “Nuclear Design of the Blanket/Shield System for a Tokamak Experimental Power Reactor,” Nucl. Technol., 39, 7 (1976).
  • J. JUNG and M.A. ABDOU, “Radiation Shielding of Major Penetrations in Tokamak Reactors,” Nucl. Technol., 41, 71 (1978).
  • M.A. ABDOU et al., “Multidimensional Neutronics Analysis of Major Penetrations in Tokamaks,” Proc. 2nd Topi. Mtg. Technology of Controlled Nuclear Fusion, Richland, Washington, September 21–23, American Nuclear Society (1976).
  • M.A. ABDOU et al., “Shielding and Maintainability in Experimental Tokamak,” Proc. 8th Symp. Engineering Problems of Fusion Research, San Francisco, California, November 13–16, p. 645 (1979).
  • M.A. ABDOU et al., “Critical Technical Issues and Evaluation and Comparison Studies for Inertial Fusion Energy Reactors,” Fus. Eng. Des., 23, 251 (1993).
  • LOS ALAMOS MONTE CARLO GROUP, “MCNP-A General Monte Carlo Code for Neutron and Photon Transport, Version 3A,” LA-7396, Rev. 2, Los Alamos National Laboratory (1986).
  • M. NAKAGAWA and T. MORI, “Morse-DD, A Monte Carlo Code Using Multigroup Double Differential Form Cross-Sections,” JAERI-M84-126, Japan Atomic Energy Research Institute (July 1984).
  • T. MORI, M. NAKAGAWA, and M. SASAKI, “Vectorization of Continuous Energy Monte Carlo Method for Neutron Transport Calculation,” J. Nucl. Sci. Technol., 29, 325 (Apr. 1992).
  • J.C. NIMAL et al., “TRIPOLI-2 Programme de Monte Carlo Polycinétique à trois dimensions,” Tomes I, II, III, DEMT/86/239, SERMA/LEPF/86/789, DEMT/86/240, SERM A/LEPS/86/799, Commissariat à l’Energie Atomique.
  • W.A. RHOADES and R.L. CHILDS, “An Updated Version of the DOT 4 (Version 4.3) One-and-Two-Dimensional Neutron/Photon Transport Code,” ORNL-5851, Oak Ridge National Laboratory (Apr. 1982); see also CCC-429, Radiation Shielding Information Center, RSIC (1982).
  • W.A. RHOADES and R.L. CHILDS “The DORT Two-Dimensional Discrete Ordinates Transport Code,” Nucl. Sci. Eng., 99, 88 (May 1988); see also CCC-484, Radiation Shielding Information Center (1988).
  • R.E. ALCOUFFE et al., “User’s Guide for TWO-DANT: A Code Package for Two-Dimensional, Diffusion-Accelerated, Neutral-Particle Transport,” LA-10049-M, Rev. 1.3, Los Alamos National Laboratory (1986).
  • T. MORI, M. NAKAGAWA, and M. SASAKI, “One-, Two-, and Three-Dimensional Transport Codes Using Multi-Group Double-Differential Form Cross Sections,” JAERI-1314, Japan Atomic Energy Research Institute (Nov. 1988).
  • G. PALMIOTTI and M. SALVATORES, “Optimized Two Dimensional Sn Transport (BISTRO),” presented at Int. Topi. Mtg. Advances in Reactor Physics, Paris, France, April 27-30, 1987.
  • “ENDF-201, ENDF/B-VI Summary Documentation,” BNL-NCS-17541 [ENDF-201], 4th ed., P.F. ROSE, Ed., Brookhaven National Laboratory (Oct. 1991).
  • K. SHIBATA et al., “JENDL-3,” JAERI-1319, Japan Atomic Energy Research Institute (1990).
  • S. GANESAN and D.W. MUIR, “FENDL Multigroup Libraries,” IAEA-NDS-129, International Atomic Energy Agency (July 1992).
  • M.A. ABDOU and C.W. MAYNARD, “Calculational Methods for Nuclear Heating —Part I: Theoretical and Computational Algorithms,” Nucl. Sci. Eng., 56, 360 (1975).
  • M.A. ABDOU and C.W. MAYNARD, “Calculational Methods for Nuclear Heating —Part II: Applications to Fusion-Reactor Blankets and Shields,” Nucl. Sci. Eng., 56, 381 (1975).
  • I. JUN, M.A. ABDOU, and A. KUMAR, “Impact of Ad Hoc Improvement of Decay and Cross Section Data on the Prediction of Fusion-Neutron Induced Radioactivity in Zirconium and Tungsten,” Fusion Technol., 25, 51 (1994).
  • M.A. ABDOU and C.W. MAYNARD, “Neutronics and Photonics for CTR Blankets and Shields,” FDM67, University of Wisconsin (July 1973).
  • M.A. ABDOU and C.W. MAYNARD, “Neutron Source Geometry Effects on Fusion Reactor Blankets,” Trans. Am. Nucl. Soc., 15, 34 (1972).
  • S. MALANG et al., “Dual Blanket Concept,” KfK 5424, Kernforschungszentrum Karlsruhe (Nov. 1994).
  • L. GIANCARLI et al., “Water-Cooled Pb-17 Li DEMO Blanket Line EU Reference Conceptual Design and Performance Presentation,” DMT 94/538 (SERMA/LCA/1678), Commissariat à 1’Energie Atomique (Dec. 1994).
  • M. DALLE DONNE et al., “BOT Solid Breeder Blanket,” KfK 5429, Kernforschungszentrum Karlsruhe (Nov. 1994).
  • M. EID et al., Ed., “Helium-Cooled Ceramic-Breeder-in-Tube Blanket Line,” Report RI-RCT 9412, Commissariat à 1’Energie Atomique and ENEA (1994).
  • M.A. ABDOU, E.L. VOLD, C.Y. GUNG, M.Z. YOUSSEF, and K. SHIN, “Deuterium-Tritium Fuel Self-Sufficiency in Fusion Reactors,” Fusion Technol., 9, 250 (1986).
  • Y. SEKI et al., “THIDA-2: An Advanced Code System for Calculation of Transmutation, Activation, Decay Heat, and Dose Rate,” CCC-410, Radiation Shielding Information Center Computer Collection (Apr. 1987).
  • F.H. MANN, “REAC*2: Users’ Manual and Code Description,” WHC-EP-0282, Westinghouse Hanford Company (1989).
  • J. JUNG, “Theory and Use of Radioactivity Code RACC,” ANL/FPP/TM-122, Argonne National Laboratory (May 1979).
  • D.L. HENDERSON and O. YASAR, “A Radioactivity and Dose Rate Calculation Code Package,” CCC-323, Radiation Shielding Information Center Computer Code Collection (Apr. 1987).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.