5
Views
3
CrossRef citations to date
0
Altmetric
Technical Paper

A Summary of Benchmark Experiments for Simulation of Fusion Reactors Using an Annular Blanket with a Line Deuterium-Tritium Source

, , , , , , , , , & show all
Pages 296-304 | Published online: 09 May 2017

References

  • T. Nakamura, H. Maekawa, J. Kusano, Y. Oyama, Y. Ikeda, C. Kutsukake, and S. Tanaka, “Fusion Neutronics Source (FNS),” Proc. 3rd Symp. Accelerator Science and Technology, Osaka, Japan, August 27-29, 1980, p. 55.
  • T. Nakamura and M. A. Abdou, “Summary of Recent Results from the JAERI/U.S. Fusion Neutronics Phase-I Experiment,” Fusion Technol., 10, 541 (1988).
  • M. Nakagawa et al., “JAERI/US Collaborative Program on Fusion Neutronics—Phase-I Fusion Integral Experiments, Analysis,” JAERI-M 88-177, Japan Atomic Energy Research Institute (1988); see also UCLA-ENG-88-15, University of California at Los Angeles (1988).
  • Y. Oyama et al., “Phase-IIA and-IIB Experiments of JAERI/USDOE Collaborative Program on Fusion Blanket Neutronics,” JAERI-M 89-154, Japan Atomic Energy Research Institute (1989).
  • M. Nakagawa, T. Mori, K. Kosako, Y. Oyama, and T. Nakamura, “JAERI/USDOE Collaborative Program on Fusion Blanket Neutronics—Analysis of Phase-IIA and-IIB Experiments,” JAERI-M 89-154, Japan Atomic Energy Research Institute (1989).
  • M. Z. Youssef, M. A. Abdou, Y. Watanabe, and P. M. Song, “US/JAERI Collaborative Program on Fusion Neutronics—Phase-IIA and-IIB Fusion Integral Experiments, The US Analysis,” UCLA-ENG-90-14 FNT-31, University California at Los Angeles (1989).
  • Y. Oyama et al., “Measured Characteristics of Be Multi-Layered and Coolant Channel Blankets: Phase-IIC Experiments of the JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1955 (1991).
  • M. Z. Youssef, A. Kumar, M. A. Abdou, M. Nakagawa, K. Kosako, Y. Oyama, and T. Nakamura, “Analysis for Heterogeneous Blankets and Comparison to Measurements: Phase-IIC Experiments of the USDOE/JAERI Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1891 (1991).
  • T. Nakamura et al., “A Line D-T Neutron Source Facility for Annular Blanket Experiment: Phase-Ill of the JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1873 (1991).
  • C. Konno et al., “Measurements of the Source Term for Annular Blanket Experiment with a Line Source: Phase-IIIA of the JAERI/USDOE Collaborative Program on Fusion Neutronics,” Fusion Technol., 19, 1885 (1991).
  • K. Kosako, “FNSUNCL,” Private Communication (1990).
  • E. F. Bennett, “A Continuous Mode Data Acquisition Technique for Proton Recoil Proportional Counter Neutron Spectrometers,” ANL/EPP/TM-239, Argonne National Laboratory (1989).
  • W. A. Rhoades and F. R. Mynett, “The DOT-III, Two-Dimensional Discrete Ordinate Transport Code,” ORNL-TM-4280, Oak Ridge National Laboratory (1973).
  • K. Maki et al., “Nuclear Group Constant Set FUSION-J3 for Fusion Reactor Nuclear Calculations Based on JENDL-3,” JAERI-M 91-072, Japan Atomic Energy Research Institute (1991) (in Japanese).
  • M. Nakagawa and T. Mori, “MORSE-DD, A Monte Carlo Code Using Multigroup Double Differential Form Cross Sections,” JAERI-M 84-126, Japan Atomic Energy Research Institute (1984).
  • M. Nakagawa, T. Mori, and M. Sasaki, “Comparison of Vectorization Methods Used in a Monte Carlo Code,” Nucl. Sci. Eng., 107, 58 (1991).
  • K. Shibata et al., “Japanese Evaluated Nuclear Data Library, Version-JENDL-3,” JAERI 1319, Japan Atomic Energy Research Institute (1990).
  • W. A. Rhoades and R. L. Childs, “An Updated Version of the DOT4 (Version 4.3) One-and Two-Dimensional Neutron/Photon Transport Code,” ORNL-5851, Oak Ridge National Laboratory (1982).
  • L. P. Ku and J. Kolibal, “RUFF-A Ray Tracing Program to Generate Uncollided Flux and First Collision Source Moments for DOT4, A User’s Manual,” EAD-R-16, Plasma Physics Laboratory, Princeton University (1980).
  • LOS ALAMOS MONTE CARLO GROUP, “MCNP-A General Monte Carlo Code for Neutron and Photon Transport,” Version 3A, LA-7396, Rev. 2, Los Alamos National Laboratory (1986).
  • M. Z. Youssef, A. Kumar, M. A. Abdou, Y. Oyama, and H. Maekawa, “Fusion Integral Experiments and Analysis and the Determination of Design Safety Factors-I: Methodology,” Fusion Technol., 28, 366 (1995).
  • M. Z. Youssef et al., “Fusion Integral Experiments and Analysis and the Determination of Design Safety Factors —II: Application to the Prediction Uncertainty of Tritium Production Rate from the U.S. DOE/JAERI Collaborative Program on Fusion Blanket Neutronics,” Fusion Technol., 28, 388 (1995).
  • M. Z. Youssef et al., “Quantification of Design Margins/Safety Factors Based on the Prediction Uncertainty in Tritium Production Rate from the Integral Experiments of the USDOE/JAERI Collaborative Program on Fusion Blanket Neutronics,” Fusion Eng. Des., 28, 457 (1995).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.