The Role of Reactant Transport in Determining the Properties of NIF Shells Made by Interfacial Polycondensation

References

• S. W. Haan., et al., “Design and Modeling of Ignition Targets for the National Ignition Facility,” Phys. Plasmas 2, 2480 (1995).
   Web of Science ®Google Scholar
• R. Cook, “Production of Hollow Microspheres for Inertial Confinement Fusion Experiments,” in Hollow and Solid Spheres and Microspheres—Science and Technology Associated with Their Fabrication and Application, D. L. Wilcox et al., Eds. (Materials Research Society, Pittsburgh, PA), pp. 101–112 (1995).
   Google Scholar
• S. A. Letts, et al., “Preparation of Hollow Shell ICF Targets Using a Depolymerizing Mandrel,” in Hollow and Solid Spheres and Microspheres—Science and Technology Associated with Their Fabrication and Application, D. L. Wilcox et al., Eds. (Materials Research Society, Pittsburgh, PA), pp. 125–130 (1995).
   Google Scholar
• S. A. Letts, et al., “Fabrication of Special Inertial Confinement Fusion Targets Using a Depolymerizable Mandrel Technique,” J. Vac. Sci. Technol. A 14, 1015 (1996).
   Web of Science ®Google Scholar
• S. A. Letts, et al., “Fabrication of Polymer Shells Using a Depolymerizable Mandrel,” Fusion Technol., 28, 1797 (1995).
   Web of Science ®Google Scholar
• M. Takagi, T. Norimatsu, T. Yamanaka, and S. Nakai, “Development of Deuterated Polystyrene Shells for Laser Fusion by Means of a Density-matched Emulsion Method,” J. Vac. Sci. Technol. A, 9(4), 2145 (1991).
   Web of Science ®Google Scholar
• G. Wilemski, et al., “Prediction of Phase Separation during the Drying of Polymer Shells,” Fusion Technol., 28, 1773 (1995).
   Web of Science ®Google Scholar
• T. Boone, et al., “Modeling of Microencapsulated Polymer Shell Solidification,” in Hollow and Solid Spheres and Microspheres—Science and Technology Associated with Their Fabrication and Application, D. L. Wilcox et al., Eds. (Materials Research Society, Pittsburgh, PA), pp. 193–198 (1995).
   Google Scholar
• Y. A. Merkuliev, et al., “Study of Production and Quality of Large (1-2 mm) Polystyrene Hollow Microspheres,” in Hollow and Solid Spheres and Microspheres—Science and Technology Associated with Their Fabrication and Application, D. L. Wilcox et al., Eds. (Materials Research Society, Pittsburgh, PA), pp. 119–124(1995).
   Google Scholar
• A. I. Nikitenko, S. M. Tolkonnikov, and R. Cook, “The Design of the Ballistic Furnace and Initial Microshell Formation,” Fusion Technol., (1997), this issue.
   Google Scholar
• M. Takagi, et al., “Development of Foam Shell with Plastic Ablator for Cryogenic Laser Fusion Target,” J. Vac. Sci. Technol. A, 11(5), 2837 (1993).
   Web of Science ®Google Scholar
• R. Arshady, “Preparation in Microspheres and Microcapsules by Interfacial Polycondensation Techniques,” J. Microencapsulation, 6(1), 13, (1989).
   PubMed Web of Science ®Google Scholar
• B. Rempp and E. W. Merrill, Polymer Synthesis, 2nd ed., New York: Huthig & Wepf, (1991).
   Google Scholar
• S. Mao, H. Ohtani, and S. Tsuge, “Compositional Analysis of Multicomponent Acrylic Resins by Pryolysis - Capillary Gas Chromatography,” J. Anal. Appl. Pyrol., 33, 181,(1995).
   Web of Science ®Google Scholar
• T. Isemura, Y. Jitsugiri, and S. Yonemori, “Compositional and Sequential Analysis of Poly(ethylene-tetraethylene) by Pyrolysis-Gas Chromatography,” J. Anal. Appl. Pyrol. 103, 109. (1995).
   Google Scholar
• J. E. Mark, (ed), Physical Properties of Polymers, New York: AIP Press, (1996).
   Google Scholar
• F. Bertini, G. Audisio, and J. Kiji, “Thermal Behavior and Degradation Mechnamism of Brominated Polystyrenes,” J. Anal. Appl. Pyrol., 33, 213, (1995).
   Web of Science ®Google Scholar
• F. Bertini, G. Audisio, and J. Kiji, “Thermal Degradation of Chlorinated Polystyrenes,” J. Anal. Appl. Pyrol., 28, 205, (1994).
   Web of Science ®Google Scholar
• M. Balooch, A. J. Lundkvist, J. Kinney, S. J. Marshall, and W. J. Siekhaus, “Viscoelastic Properties of Decalcified Human Dentine Measured in Water by an AFM-Based Indentation Technique,” to be published.
   Google Scholar
• J.M.G. Cowie, Polymers: Chemistry & Physics of Modern Materials, 2nd ed., London: Blackie & Son, Ltd., (1991).
   Google Scholar
• J. Crank, and G. S. Park, Diffusion in Polymers, New York: Academic Press, Inc., (1968).
   Google Scholar
• D. J. Ensore, H. B. Hoppenberg, V. T. Stannett, “Effect of Particle Size on the Mechanism Controlling n-hexane Sorption in Glassy Polystyrene,” Polymer, 18, 793, (1977).
   Web of Science ®Google Scholar
• A. R. Berens, H. B. Hoppenberg, “Diffusion and Relaxation in Glassy Polymer Powders: 2. Separation of Diffusion and Relaxation Parameters,” Polymer, 19, 489, (1978).
   Web of Science ®Google Scholar
• K. E. Miller, R. H. Krueger, and J. M. Torkelson, “Mobility-Sensitive Fluorescence Probes for Quantative Monitoring of Water Sorption and Diffusion in Polymer Coatings,” Journal of Polymer Science: Part B: Polymer Physics, 33, 2343 (1995).
   Web of Science ®Google Scholar