93
Views
14
CrossRef citations to date
0
Altmetric
Technical Paper

High-Burnup BWR Fuel Behavior Under Simulated Reactivity-Initiated Accident Conditions

, , &
Pages 246-259 | Published online: 12 May 2017

References

  • T. FUKETA, F. NAGASE, K. ISHIJIMA, and T. FUJISHIRO, “NSRR/RIA Experiments with High-Burnup PWR Fuels,” Nucl. Saf., 37, 4 (Oct.-Dec. 1996).
  • J. PAPIN and F. SCHMIDT, “The Status of the CABRIREP-Na Test Program: Present Understanding and Still Pending Questions,” Proc. 25th Water Reactor Safety Information Mtg. (WRSM), Bethesda, Maryland, October 20–22, 1997, NUREG/CP-0162, Vol. 2, U.S. Nuclear Regulatory Commission (1998).
  • T. FUKETA, H. SASAJIMA, and T. SUGIYAMA, “Behavior of High-Burnup PWR Fuels with Low-Tin Zircaloy-4 Cladding Under Reactivity-Initiated-Accident Conditions,” Nucl. Technol., 133, 50 (2001).
  • T. NAKAMURA, M. YOSHINAGA, M. SOBAJIMA, K. ISHIJIMA, and T. FUJISHIRO, “Boiling Water Reactor Fuel Behavior at Burnup of 26 GWd/tonneU Under Reactivity-Initiated Accident Conditions,” Nucl. Technol., 108, 45 (1994).
  • T. NAKAMURA, M. YOSHINAGA, M. TAKAHASHI, K. OKONOGI, and K. ISHIJIMA, “Boiling Water Reactor Fuel Behavior Under Reactivity-Initiated-Accident Conditions at Burnup of 41 to 45 GWd/tonneU,” Nucl. Technol., 129, 141 (2000).
  • Y. HAYASHI, T. KOYAMA, S. KOIZUMI, T. YASUDA, and M. NOMURA, “BWR Fuel Performance and Recent R&D Activities in Japan,” Proc. Int. Topl.Mtg. LWR Fuel Performance, Avignon, France, April 21–24, 1991, p. 36, American Nuclear Society/European Nuclear Society (1991).
  • H. HAYASHI, M. KITAMURA, T. NOMATA, T. KOGAI, K. ITO, T. KUBO, Y. WAKASHIMA, and H. SAKURAI, “Irradiation Characteristics of BWR STEP II Lead Use Assemblies,” Proc. Int. Topl.Mtg. LWR Fuel Performance, Portland, Oregon, March 2–6, 1997, p. 296, American Nuclear Society (1997).
  • T. FUKETA, T. NAKAMURA, K. KUSAGAYA, H. SASAJIMA, and H. UETSUKA, “High Burnup BWR Fuel Response to Reactivity Transients and a Comparison with PWR Fuel Response,” Proc. 28th Water Reactor Safety Information Mtg., Bethesda, Maryland, October 2000, NUREG/CP-0172, p. 191, U.S. Nuclear Regulatory Commission (2001).
  • T. NAKAMURA, M. TAKAHASHI, and M. YOSHINAGA, “Evaluation of Burnup Characteristics and Energy Deposition During NSRR Pulse Irradiation Tests on Irradiated BWR Fuels,” JAERI-Research 2000-048, Japan Atomic Energy Research Institute (2000) (in Japanese).
  • T. NAKAMURA, H. SASAJIMA, T. FUKETA, and K. ISHIJIMA, “Fission Gas Induced Cladding Deformation of LWR Fuel Rods Under Reactivity Initiated Accident Conditions,” J. Nucl. Sci. Technol., 33, 12, 924 (1996).
  • T. TORIMARU, T. YASUDA, and M. NAKATSUKA, “Changes in Mechanical Properties of Irradiated Zircaloy-2 Fuel Cladding due to Short Term Annealing,” J. Nucl. Mater., 238, 169 (1996).
  • L. J. SIEFKEN, C. M. ALLISON, M. P. BOHN, and S. O. PECK, “FRAP-T6: A Computer Code for the Transient Analysis of Oxide Fuel Rods,” NUREG/CR-2148, EGG-2104, EG&G Idaho (1981).
  • K. ISHIJIMA, S. TANZAWA, T. FUKETA, and T. FUJISHIRO, “Behavior of Preirradiated Fuels Under Simulated RIA Conditions,” Proc. Topl. Mtg. Safety Thermal Reactors, Portland, Oregon, July 21–25, 1991, p. 577, American Nuclear Society (1991).
  • H. SASAJIMA, T. FUKETA, T. NAKAMURA, J. NAKAMURA, and H. UETSUKA, “Behavior of Irradiated ATR/MOX Fuel Under Reactivity Initiated Accident Conditions,” J. Nucl. Sci. Technol., 37, 5, 455 (2000).
  • P. E. MACDONALD, S. L. SEIFFERT, Z. R. MARTINSON, R. K. McCARDELL, D. E. OWEN, and S. K. FUKUDA, “Assessment of Light-Water-Reactor Fuel Damage During Reactivity-Initiated Accident,” Nucl. Saf., 21, 5, 582 (Sep.-Oct. 1980).
  • “Treatment of High Burnup Fuels for Safety Evaluation in Reactivity Initiated Events of Commercial LWR,” Japan Nuclear Safety Commission (1998) (in Japanese).
  • K. SUYAMA, T. IWASAKI, and N. HIRAKAWA, “Integrated Burnup Calculation Code System SWAT,” JAERI-Data/Code 97-047, JapanAtomic Energy Research Institute (1997).
  • “Annual Reports of the Verification Test Program of High Burnup Fuels (Fiscal Year 1999),” Nuclear Power Engineering Corporation (1999) (in Japanese).
  • N. OHNISHI and T. INABE, “Evaluation of Effective Energy Deposition in Test Fuel During Power Burst Experiment in NSRR,” J. Nucl. Sci. Technol., 19, 7, 528 (1982).
  • K. MATSUMURA, T. IKEDA, T. NAKAJIMA, Y. KUDO, and T. ANEGAWA, “A Study on the Fuel Loading Effect in Rod Drop Accident Analysis Using a Three Dimensional TransientCode (ARIES),” Proc. 7th Int. Conf. Nucl. Eng. (ICONE-7), Tokyo, Japan, April 11–15, 1999 (1999).
  • T. FUKETA, F. NAGASE, T. NAKAMURA, H. UET-SUKA, and K. ISHIJIMA, “NSRR Pulse Irradiation Experiments and Tube Burst Tests,” Proc. 26th Water Reactor Safety Information Mtg., Bethesda, Maryland, October 26–28, 1998, NUREG/CP-0166, Vol. 3, p. 223, U.S. Nuclear Regulatory Commission (1999).
  • F. NAGASE, T. OHTOMO, and H. UETSUKA, “High-Pressurization-Rate Burst Test of Zircaloy-4 Fuel Cladding at 620 K,” JAERI Research 2000-046, Japan Atomic Energy Research Institute (2000) (in Japanese).
  • K. KITANO, T. FUKETA, H. SASAJIMA, and H. UETSUKA, “Optimization of Tensile Method and Specimen Geometry in Modified Ring Tensile Test,” JAERI-Research 2001-011, JapanAtomic Energy Research Institute (2001) (in Japanese).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.