Neutronic and Safety Aspects of a Gas-Cooled Subcritical Core for Minor Actinide Transmutation

References

• EUROPEAN TECHNICAL WORKING GROUP ON ADS, “A European Roadmap for Developing Accelerator Driven Systems (ADS) for Nuclear Waste Incineration,” ISBN 88-8286008-6, ENEA (2001).
   Google Scholar
• J. P. GROUILLER, S. PILLON, C. DE SAINT JEAN, F. VARAINE, L. LEYVAL, G. VAMBENEPE, and B. CARLIER, “Minor Actinides Transmutation Scenario Studies with PWRs, FRs and Moderated Targets,” J. Nucl. Mater., 320, 163 (2003).
   Web of Science ®Google Scholar
• A. VASILE, P DUFOUR, H. GOLFIER, J. P GROUIL-LER, J. L. GUILLET, C. POINOT, G. YOUINOU, and A. ZAETTA, “Advanced Fuels for Plutonium Management in Pressurized Water Reactors,” J. Nucl. Mater., 319, 173 (2003).
   Web of Science ®Google Scholar
• J. WALLENIUS and M. ERIKSSON, “Neutronics of Minor-Actinide Burning Accelerator-Driven Systems with Ceramic Fuel,” Nucl. Technol., 152, 367 (2005).
   Web of Science ®Google Scholar
• “Review of PNL Study on Transmutation Processing of High Level Waste,”D. G. FOSTER, Ed., LA-UR-74-74, Los Alamos National Laboratory (1974).
   Google Scholar
• T. TAKIZUKA, H. TAKADA, I. KANNO, T. NISHIDA, M. AKABORI, and Y. KANEKO, “Conceptual Design of Transmutation Plant,” Proc. Specialist Mtg. Accelerator-Driven Transmutation Technology for Radwaste and Other Applications, Stockholm, Sweden, June 24-28, 1991.
   Google Scholar
• K. TSUJIMOTO, T. SASA, K. NISHIHARA, H. OI-GAWA, and H. TAKANO, “Neutronics Design for Lead-Bismuth Cooled Accelerator-Driven System for Transmutation of Minor Actinide,” J. Nucl. Sci. Technol., 41, 1, 21 (2004).
   Web of Science ®Google Scholar
• B. CARLUEC and P. ANZIEU, “Proposal for a Gas Cooled ADS Demonstrator,” Proc. 3rd Int. Conf. Accelerator Driven Transmutation Technologies and Applications (ADTTA’99), Praha, Czech Republic, June 7-11, 1999.
   Google Scholar
• G. B. MELESE-D’HOSPITAL, “Review of Gas Cooled Reactors Thermal Hydraulics,” Proc. ANS/ASME/NRC Int. Topl. Mtg. Nuclear Reactor Thermal-Hydraulics, Saratoga Springs, New York, October 5-8, 1980.
   Google Scholar
• J. P. GAILLARD, G. MIGNOT, and A. CONTI, “Thermal-Hydraulic Design of a Gas Cooled Fast Reactor,” Proc. 2003 Int. Congress Advances in Nuclear Power Plants (ICAP ‘03), Cordoba, Spain, May 4-7, 2003, American Nuclear Society (2003) (CD-ROM).
   Google Scholar
• E. E. FELDMAN and T. Y. C. WEI, “Cold-Finger Concept for Passive Decay Heat Removal in Gas-Cooled Reactors,” Trans. Am. Nucl. Soc., 88, 681 (2003).
   Google Scholar
• P FORTESCUE, G. B. MELESE-D’HOSPITAL, J. PEAK, and L. MEYER, “A Developmental Gas-Cooled Fast Breeder Reactor Plant,” Proc. Nuclex 69, Basel, Switzerland, October 6-11, 1969.
   Google Scholar
• J. B. DEE and G. B. MELESE-D’HOSPITAL, “Part 1— The 300 MW(e) GCFR Demonstration Plant,” Mech. Eng., 94, 18 (1972).
   Google Scholar
• M. ERIKSSON, J. WALLENIUS, M. JOLKKONEN, and J. E. CAHALAN, “Inherent Safety of Fuels for Accelerator-Driven Systems,” Nucl. Technol., 151, 314 (2005).
   Web of Science ®Google Scholar
• N. CHAUVIN, J. C. GARNIER, J. L. SERAN, P MARTIN, and P. BROSSARD, “Requirements for Fuel and Structural Materials for Gas Cooled Fast Reactor (GFR), Preliminary Design,” Proc. Global 2003, New Orleans, Louisiana, November 16-20, 2003, American Nuclear Society (2003) (CD-ROM).
   Google Scholar
• J. WALLENIUS, “Neutronic Aspects of Inert Matrix Fuels for Application in ADS,” J. Nucl. Mater., 320, 142 (2003).
   Web of Science ®Google Scholar
• J. WALLENIUS, K. MINATO, and Y. ARAI, “Influence of 15N Enrichment on Neutronics, Costs and 14C Production in Nitride Fuel Cycle Scenarios,” J. Nucl. Mater. (submitted for publication).
   Google Scholar
• R. THETFORD and M. MIGANELLI, “The Chemistry and Physics of Modelling Nitride Fuels for Transmutation,” J. Nucl. Mater., 320, 44 (2003).
   Google Scholar
• L. ZABOUDKO, “Status of CEA-Minatom Collaborative Experiment Bora-Bora: Fuels with High Plutonium Content,” Proc. ANL Transmuter Fuel Development Workshop, Idaho Falls, Idaho, November 19-21, 2001.
   Google Scholar
• J. CETNAR, J. WALLENIUS, and W. GUDOWSKI, “MCB: A Continuous Energy Monte-Carlo Burnup Simulation Code, Actinide and Fission Product Partitioning and Transmutation,” Proc. 5th Int. Information Exchange Mtg., Mol, Belgium, November 25-27, 1998, p. 523, Organization for Economic Cooperation and Development/Nuclear Energy Agency (1998).
   Google Scholar
• “NEA-1643 MCBIC,” available on the Internet at (http://www.nea.fr/abs/html/nea-1643.html) (Feb. 15, 2005).
   Google Scholar
• “Actinide and Fission Product Partitioning and Transmutation—Status and Assessment Report,” Organization for Economic Cooperation and Development/Nuclear Energy Agency (1999).
   Google Scholar
• M. DALLE DONNE and L. MEYER, “Turbulent Convective Heat Transfer from Rough Surfaces with Two-Dimensional Rectangular Ribs,” Int. J. Heat Mass Transfer, 20, 583 (1977).
   Google Scholar
• M. KAVIANY, Principles of Heat Transfer in Porous Media, Springer-Verlag, New York (1999).
   Google Scholar
• CRC Handbook of Chemistry and Physics, 73rd ed., D. R. LIDE, Ed., CRC Press, Boca Raton, Florida (1992).
   Google Scholar
• N. SCOTT CANNON, F. H. HUANG, and M. L. HAMILTON, “Transient and Static Mechanical Properties of D9 Fuel Pin Cladding and Duct Material Irradiated to High Fluence,” Proc. 15th ASTM Int. Symp. Effects of Radiation on Materials, Nashville, Tennessee, 1992, ASTM STP 1125, American Society for Testing and Materials (1992).
   Google Scholar
• R. J. PUIGH and M. L. HAMILTON, “In-Reactor Creep Rupture Behavior of the D19 and 316 Alloys,” Proc. Influence of Radiation on Material Properties: 13th Int. Symp. (Part II), Seattle, Washington, June 23-25, 1986, American Society for Testing and Materials (1987).
   Google Scholar
• J. L. SÉRAN et al., “Behaviour Under Neutron Irradiation of the 15-15 Ti and Em10 Steels Used as Standard Materials of the PHÉNIX Fuel Subassembly,” Proc. 15th ASTM Int. Symp. Effects of Radiation on Materials, Nashville, Tennessee, 1992, ASTM STP 1125, American Society for Testing and Materials (1992).
   Google Scholar
• GROUPE DE TRAVAIL RAMSES 2, “Règles d’analyse mécaniques des stuctures irradiées,” CEA R.5618, Commissariat à l’Energie Atomique.
   Google Scholar
• G. B. MELESE-D’HOSPITAL, “Natural Circulation Cooling Potential of CO2 and He for GCFR’s,” Proc. ANS/ASME/NRC Int. Topl. Mtg. Nuclear Reactor Thermal-Hydraulics, Saratoga Springs, New York, October 5-8, 1980.
   Google Scholar
• N. E. TODREAS and M. S. KAZIMI, Nuclear Systems I—Thermal Hydraulic Fundamentals, Hemisphere Publishing Company, New York (1989).
   Google Scholar
• A. E. WALTAR and A. B. REYNOLDS, Fast Breeder Reactors, Pergamon Press, New York (1981).
   Google Scholar
• M. A. HASSAN and K. REHME, “Heat Transfer near Spacer Grids in Gas-Cooled Rod Bundles,” Nucl. Technol., 52, 401 (1981).
   Web of Science ®Google Scholar
• The Nuclear Fuel of Pressurized Water Reactors and Fast Reactors—Design and Behavior, H. BAILLY, D. MÉNES-SIER, and C. PRUNIER, Eds., Commissariat à l’Energie Atomique (1999).
   Google Scholar
• H. W. WIESE, “Actinide Transmutation Properties of Thermal and Fast Fission Reactors Including Multiple Recycling,” J. Alloys Compounds, 271, 522 (1998).
   Google Scholar
• W. S. YANG and H. S. KHALIL, “Blanket Design Studies of a Lead-Bismuth Eutectic-Cooled Accelerator Transmutation of Waste System,” Nucl. Technol., 135, 162 (2001).
   Web of Science ®Google Scholar
• C. W. HUNTER, R. L. FISH, and J. J. HOLMES, “Mechanical Properties of Unirradiated Fast Reactor Cladding During Simulated Overpower Transients,” Nucl. Technol., 27, 376 (1975).
   Google Scholar