19
Views
13
CrossRef citations to date
0
Altmetric
Technical Paper

A Subcritical, Helium-Cooled Fast Reactor for the Transmutation of Spent Nuclear Fuel

, , , , , , , , , , , , , , & show all
Pages 99-123 | Published online: 10 Apr 2017

REFERENCES

  • “GEN-IV International Forum: Nuclear Energy Systems for the Future,” available on the Internet at http://www.gif.inel.gov/.
  • “Advanced Fuel Cycle Initiative,” available on the Internet at http://www.nuclear.gov/afci.
  • F. H. SOUTHWORTH et al., “The Next Generation Nuclear Plant (NGNP) Project,” Proc. Global 03, New Orleans, Louisiana, November 16–20, 2003, American Nuclear Society (2003) (CD-ROM).
  • C. RODRIGUEZ et al., “Deep-Burn: Making NuclearWaste Transmutation Practical,” Nucl. Eng. Des., 2805 (2003).
  • W. M. STACEY et al., “A Subcritical, Gas-Cooled Fast Transmutation Reactor with a Fusion Neutron Source,” Nucl. Technol., 150, 162 (2005).
  • International Tokamak Experimental Reactor; available on the Internet at http://www.iter.org; also “ITER Detailed Design Report, Cost Review and Safety Analysis,” International Thermonuclear Reactor Project (1996); also “The ITER Project L-7 Implementation,” ENEA; available on the Internet at www.brasimone.enea.it/iterl-7 (1998).
  • E. LONG et al., “Fabrication of ORNL Fuel Irradiated in the Peachbottom Reactor and Post-Irradiation Examination of the Recycle Test Elements 7 and 4,” Oak Ridge National Laboratory (Oct. 1974).
  • D. A. PETTI et al., “Key Differences in the Fabrication, Irradiation and High Temperature Accident Testing of U.S. and German TRISO-Coated Particle Fuel, and Their Implications on Fuel Performance,” Nucl. Eng. Des., 222, 281 (2003).
  • B. B. KADOMTSEV et al., “USSR Contribution to the Phase IIA INTOR Workshop,” Vol. 2, p. VIII–64 (1982).
  • M. SAWAN, University of Wisconsin, Personal Communication (2004).
  • M. KUBOTA, Y. MORITA, I. YAMAGUCHI, I. YAMAGISHI,T. FUJIWARA, and M. WATANABE, “Development of the Four Group Partitioning Process at JAERI,” Fifth OECD/NEA Information Exchange Meeting on Actinide and Fission Product Partitioning and Transmutation, Session 2, pp. 1–9 (1998).
  • M. C. THOMPSON, M. A. NORATO, G. F. KESSINGER, R. A. PIERCE, T. S. RUDISILL, and J. D. JOHNSON, “Demonstration of the UREX Solvent Extraction Process with Dresden Reactor Fuel Solution,” Westinghouse Savannah River Company (2002).
  • “Implications of Partitioning and Transmutation in Radioactive Waste Management,” International Atomic Energy Agency (2003).
  • C. MADIC, “Overview of the Hydrometallurgical and Pyro-Metallurgical Processes Studied Worldwide for the Partitioning of High Active Nuclear Wastes,” OECD/NEA 6th Information Exchange Meeting, Madrid, Spain, pp. 53–64, Organization for Economic Cooperation and Development/Nuclear Energy Agency (2000).
  • E. ZIMMER and C. GANGULY, “Reprocessing and Refabrication of Thorium-Based Fuels,” Institut für chemische Technologie der nuklearen Entsorgung, Kernforschungsanlage Jülich GmbH; available on the Internet at http://www.iaea.org/inis/aws/fnss/fulltext/0412_8.pdf (2005).
  • J. J. LAIDLER, L. BURRIS, E. D. COLLINS, J. DUGUID, R. N. HENRY, J. HILL, E. J. KARELL, S.M. McDEAVITT,M. THOMPSON, M. A. WILLIAMSON, and J. L. WILLIT, “Chemical Partitioning Technologies for an ATW System,” Prog. Nucl. Energy, 38, 1-2, 65 (2001).
  • D. E. CLARK, J. B. WHITE, and A. J. MACHIELS, “Nuclear Waste Management,” Advances in Ceramics, Vol. 20, American Ceramic Society, Waterville, Ohio (1986).
  • Reactor Institute Delft; available on the Internet at http://www.iri.tudelft.nl/~rfwww/images/triso.jpg.
  • F. J. HOMAN, T. B. LINDEMER, E. L. LONG, Jr., T. N. TIEGS, and R. L. BEATTY, “Stoichiometric Effects on Performance of High-Temperature Gas-Cooled Reactor Fuels from the U-C-O System,” Nucl. Technol., 35, 428 (1977).
  • T. B. LINDEMER, “Thermochemical Analysis of Gas-Cooled Reactor Fuels Containing Am and Pu Oxides,” ORNL/TM-2002/133, Oak Ridge National Laboratory (2002).
  • H. HAYASHI, K. SAWA, and Y. KOMORIL, “Irradiation Experiences and the Future Plan in the HTTR Project,” Proc. Int. Symp. Research Reactor and Neutron Science, Daejeon, Korea, April 25–29, 2005, Korean Atomic Energy Research Institute (2005).
  • W. CORWIN and J. KLETT, “High Conductivity Graphite Foams and Applications,” Oak Ridge National Laboratory (May 2004).
  • R. A. KARAM et al., “High Temperature Gas-Cooled Fast Reactor,” Proc. Int. Conf. Advanced Power Plants, Seoul, May 14–20, 2005.
  • W. J. LACKEY and T. L. STARR, “Fabrication of Fiber Reinforced Ceramic Composites by Chemical Vapor Infiltration: Processing, Structure and Properties,” Fiber Reinforced Ceramic Composites, K. S. MAZDIYASNI, Ed., Noyes Publications, Park Ridge, New Jersey (1990).
  • J. KLETT, Oak Ridge National Laboratory, Private Communication (2005).
  • J. F. SHACKELFORD and W. ALEXANDER, Eds. CRC Materials Science and Engineering Handbook, CRC Press, Boca Raton, Florida (2000).
  • T. BESMANN, “Chemical Vapor Infiltration Modeling and Processing of Energy-Related Materials,” Oak Ridge National Laboratory (Nov. 1999).
  • K. MINATO and T. OGAWA, “Research and Development of ZrC Coated Particle Fuel,” Proc. Atoms for Prosperity (Global 03), p. 1068, American Nuclear Society (2003) (CD-ROM).
  • C. T. WALKER, T. KAMEYAMA, S. KITAIMA, and M. KINISHITA, “Concerning the Microstructure Changes that Occur at the Surface of UO2 Pellets on Irradiation to High Burnup,” J. Nucl. Mater., 188, 73 (1992).
  • H. BAILLEY, D. MENESSIER, and C. PRUNIER, The Nuclear Fuel of Pressurized WaterReactors and Fast Reactors: Design and Behaviour, Chap. 5, p. 427, Intercept Ltd, Hampshire, United Kingdom (1999).
  • “ORIGEN-S: SCALE System Module to Calculate Fuel Depletion, Actinide Transmutation, Fission Product Buildup and Decay, and Associated Radiation Source Terms,” NUREG/CR-200, Revision 7 (ORNL/NUREG/CSD-2/V2/R7), Oak Ridge National Laboratory (2004).
  • T. SALING, Radioactive Waste Management, Hemisphere Publishing Corporation, New York (1990).
  • R. RASMUSSEN, “Dry Storage Option for Spent Fuel Management,” Proc. USCEA Fuel Cycle Conf., New Orleans, Louisiana (1988).
  • R. COCHRAN and N. TSOULFANIDIS, The Nuclear Fuel Cycle: Analysis and Management, American Nuclear Society, La Grange Park, Illinois (1990).
  • Information available on the Internet at www.wisconsinmetaltech.com.
  • C. DE OLIVEIRA and A. GODDARD, “EVENT—A Multidimensional Finite Element-Spherical Harmonics Radiation Transport Code,” Proc. Int. Seminar 3-D Deterministic Radiation Transport Codes, Paris, France, Organization for Economic Cooperation and Development (1996).
  • H. HENRYSON et al., “MC2-2: A Code to Calculate Fast Neutron Spectra and Multigroup Cross Sections,” ANL-8144, Argonne National Laboratory (1976).
  • “DANTSYS: A Diffusion Accelerated Neutral Particle Transport Code System,” LA-12969-M Manual UC-705, Los Alamos National Laboratory (1997).
  • J. F. BRIESMEISTER, Ed., “MCNP—A General Monte Carlo N-Particle Transport Code,” Version 4B, LA-12625-M, Los Alamos National Laboratory (1997).
  • I. C. GAULD, O. W. HERMANN, and R. M. WESTFALL, NUREG/CR-0200, 7th ed., Vol. 2, Chap. 3, p. 99 (2004).
  • “Understanding NJOY,” LA-UR-00-1538, Los Alamos National Laboratory; available on the Internet at http://t2.lanl.gov/njoy/ (2000).
  • B. J. TOPPEL, “A User’s Guide to the REBUS-3 Fuel Cycle Analysis Capability,” ANL-83-2, Argonne National Laboratory (1983).
  • “KENO V.a: An Improved Monte Carlo Criticality Program,” NUREG/CR-0200, Revision 7, Vol. II, Sec. F11, ORNL/NUREG/CSD-2/R7, Oak Ridge National Laboratory (2004).
  • J. D. GALAMBOS et al., “Commercial Tokamak Reactor Potential with Advanced Tokamak Operation,” Nucl. Fusion, 35, 551 (1995).
  • M. HUGUET, “Key Engineering Features of the ITER-FEAT Magnet System and Implications for the R&D Programme,” Nucl. Fusion, 41, 645 (2001).
  • ITER Technical Basis, Chap. 2.1, “Magnets,” G A0 FDR 101-07-13 R1.0 (2001).
  • W. M. STACEY et al., “A Fusion Transmutation of Waste Reactor,” Fusion Sci. Technol., 41, 116 (2002).
  • M. A. ABDOU, M. TILLACK, and R. A. RAFFRAY, “Thermal, Fluid Flow, and Tritium Release Problems in Fusion Blankets,” Fusion Technol., 18, 165 (1990).
  • M. A. ABDOU et al., “Deuterium-Tritium Fuel Self Sufficiency in Fusion Reactors,” Fusion Technol., 9, 250 (1986).
  • M. A. ABDOU et al., “Evaluation of the Prediction Uncertainty in Tritium Production Based on Results from Experiments on an Li2O Annular Blanket Surrounding a 14 MeV Simulated Line Source,” Fusion Eng. Des., 28, 673 (1995).
  • “Materials/Silicon Carbide (SiC) Properties,” 2002. Accuratus; available on the Internet at http://www.accuratus.com/silcar.html (Mar. 2005).
  • M. S. KAZIMI and N. E. TODREAS, Nuclear Systems I: Thermal Hydraulics Fundamentals, pp. 16–17, 417, 684-685, Hemisphere Publishing Corporation, New York (1990).
  • “Computer Aided Drawing Solid,” Solid Edge, Version 15.0, Solid Works Inc. (2003).
  • “Computational Fluid Dynamics,” Fluent/GAMBIT, Version 6.1.22/s.1.2, Fluent Inc. (2004).
  • F. P. INCROPERA and D. P. DeWITT, Fundamental of Heat and Mass Transfer, 5th ed., Chap. 3, John Wiley and Sons, New York (2002).
  • M. J. MORAN and H. N. SHAPIRO. Fundamentals of Engineering Thermodynamics, 4th ed., pp. 441–467, JohnWiley and Sons, New York (2000).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.