References
- M. H. CHANG, S. K. SIM, and Y. D. HWANG, “SMART—An Advanced Small Integral PWR for Nuclear Desalination and Power Generation,” Proc. Global ’ 99, Jackson Hole, Wyoming, August 29-September 3, 1999, American Nuclear Society (1999) ( CD-ROM).
- L. RIZHU and J. HUAIMING, “Structural Design and Two-Phase Flow Stability Test for the Steam Generator,” Nucl. Eng. Des., 218, 179 (2002).
- H.-S. PARK, K.-Y. CHOI, S. CHO, C.-K. PARK, S.-J. YI, C.-H. SONG, and M.-K. CHUNG, “Experiments on the Heat Transfer and Natural Circulation Characteristics of the Passive Residual Heat Removal System for an Advanced Integral Type Reactor,” J. Nucl. Sci. Technol., 44, 5, 703 (2007).
- Y. J. CHUNG, S. H. YANG, H. C. KIM, and S. Q. ZEE, “Thermal Hydraulic Calculation in a Passive Residual Heat Removal System of the SMART-P Plant for Forced and Natural Convection Conditions,” Nucl. Eng. Des., 232, 277 (2004).
- H.-S. PARK, K.-Y. CHOI, S.-J. LEE, and M.-K. CHUNG, “Experiments on the Performance Sensitivity of the Passive Residual Heat Removal System of an Advanced Integral Type Reactor,” Proc. 5th Korea-Japan Symp. Nuclear Thermal Hydraulics and Safety (NTHAS5), Jeju, Korea, November 26–29, 2006, Korean Nuclear Society (2006).
- B. CHEXAL, G. LELLOUCHE, J. HOROWITZ, and J. HEALZER, “A Void Fraction Correlation for Generalized Applications,” Prog. Nucl. Energy, 27, 4, 255 (1992).
- Y. J. CHUNG, H. K. KIM, H. C. KIM, and S. Q. ZEE, “A Conservative Analysis Methodology for a Steam-Line-Break AccidentoftheSmArT-PPlant,” Nucl. Technol., 153, 41 (2006).
- Y. J. CHUNG, S. H. KIM, and H. C. KIM, “Thermal Hydraulic Analysis of SMART for Heat Removal Transients by a Secondary System,” Nucl. Eng. Des., 225, 257 (2003).
- S. H. YANG, “TASS/SMR Verification Report using VISTANatural Circulation Test,” Internal Report, Korea Atomic Energy Research Institute (2006).
- J. J. JEONG, K. S. HA, B. D. CHUNG, and W. J. LEE, “Development of a Multi-Dimensional Thermal Hydraulic System Code. MARS 1.3.1,” Ann. Nucl. Energy, 26, 1611 (1999).
- Y. J. LEE, S. W. BAE, and B. D. CHUNG, “Validation of One-Dimensional Module of MARS2.1 Computer Code by Comparing with the RELAP5/MOD3.3 Developmental Assessment Results,” KAERI/TR-2411/2003, Korea Atomic Energy Research Institute (2003).
- Y. MORI and W. NAKAYAMA, “Study on Forced Convective Heat Transfer in Curved Pipes (2nd Report, Turbulent Region),” Int. J. Heat Mass Transfer, 10, 37 (1967).
- F W. DITTUS and L. M. K. BOELTER, “Heat Transfer in Automobile Radiators of the Tubular Type,” Univ. California Publ. Eng., 2, 443 (1930).
- S. W. CHURCHILL and H. H. S. CHU, “Correlating Equations for Laminar and Turbulent Free Convection from a Vertical Plate,” Int. J. Heat Mass Transfer, 18, 1323 (1975).
- J. C. CHEN, “A Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow,” Process Des. Dev., 5, 322 (1966).
- M. M. SHAH, “A General Correlation for Heat Transfer During Film Condensation Inside Pipes,” Int. J. Heat Mass Transfer, 22, 547 (1979).