REFERENCES
- S. TIMOSHENKO and D. H. YOUNG, Elements of Strength of Materials, D. Van Nostrand Company, Inc., Princeton, New Jersey (1962).
- D. W. FALETTI and L. J. ETHRIDGE, “A Method for Predicting Cracking inWaste Glass Canisters,” PNL 5947, Pacific Northwest Laboratories (Aug. 1986).
- S. C. SLATE, L. R. BUNNELL, W. A. ROSS, F. A. SIMONEN, and J. H. WESTSIK, “Stress and Cracking in High-Level Waste Glass,” PNL SA 7369, Pacific Northwest Laboratories (Dec. 1978).
- D. M. MARTIN, “Fracture in Glass/High Level Waste Canisters,” NUREG/CR-4198, Iowa State University for U.S. Nuclear Regulatory Commission, Washington D.C. (1985).
- F. V. TOOLEY, The Handbook of Glass Manufacture, Books for Industry, Inc., New York, New York (1974).
- W. B. YOUNG, “Residual Stress Induced by Solidification of Thermoviscoelastic Melts in the Postfilling Stage,” J. Mater. Processing Technol., 145, 3, 317 (Feb. 2004).
- W. F. ZOETELIEF, L. F. A. DOUVEN, and A. J. INGEN HOUSZ, “Residual Thermal Stresses in Injection Molded Products,” Polym. Eng. Sci., 36, 14, 1886 (July 1996).
- K. J. BATEMAN and C. W. SOLBRIG, “Stabilizing Glass Bonded Waste Forms Containing Fission Products Separated from Spent Nuclear Fuel,” Sep. Sci. Technol., 43, 9, 2722 (July 2008).
- K. J. BATEMAN and C. W. SOLBRIG, “Using Center Hole Heat Transfer to Reduce Formation Times for Ceramic Waste Forms from Pyroprocessing,” Proc. 14th Int. Conf. Nuclear Engineering (ICONE 14), 89794, Miami, Florida, July 17–20, 2006, American Society of Mechanical Engineers (2006).
- K. J. BATEMAN and C. W. SOLBRIG, “Use of Similarity Analysis on Experiments of Different Size to Predict Critical Cooling Rates for Large Ceramic Waste Forms,” Proc. 16th Int. Conf. Nuclear Engineering (ICONE16), Orlando, Florida, May 11–15, 2008, American Society of Mechanical Engineers (2008).
- K. J. BATEMAN and D. D. CAPSON, “Consolidating Electrorefined Spent Nuclear Fuel Waste: Analysis and Experiment,” Proc. ASME Int. Mechanical Engineering Congress and Exposition (IMECE 2003), Washington, D.C., November 16–21, 2003, American Society of Mechanical Engineers (2003).
- S. TIMOSHENKO and J. N. GOODIER, Theory of Elasticity, 3rd ed., McGraw-Hill, New York (1970).
- K. J. BATEMAN, C. W. SOLBRIG, and M. C. MORRISON, “Analysis of the Damage in a Ceramic Waste Form,” AIChE Spring Meeting, San Antonio, Texas, March 21–25, 2010, American Institute of Chemical Engineers.
- E. B. SHAND, Glass Engineering Handbook, 2nd ed., McGraw-Hill, New York (1958).