32
Views
3
CrossRef citations to date
0
Altmetric
Technical Paper

Parametric Sensitivity Study on the Reflooding Models of the MARS Code Based on 6 × 6 Rod Bundle Test Results

, , &
Pages 54-67 | Published online: 13 May 2017

References

  • FLECHT SEASET PROGRAM, “PWR FLECHT SEASET Unblocked Bundle, Forced and Gravity Reflood Task Data Report,” Vols. 1 and 2. NUREG/CR-1532, EPRI NP-1459, WCAP-9699, Westinghouse Company (1980).
  • T. IGUCHI, “Study on Thermal Hydraulics During a PWR Reflood Phase,” JAERI-Research 98-54, Japan Atomic Energy Research Institute (1998).
  • T. IGUCHI, Y. MURAO, J. SUGIMOTO, H. AKIMOTO, T. OKUBO, and T. HOJO, “Summary of CCTF Test Results—Assessment of Current Safety Evaluation Analysis on Reflood Behavior During a LOCA in a PWR with Cold-Leg-Injection-Type ECCS,” Nucl. Eng. Des., 108, 233 (1988).
  • Y. MURAO, T. IGUCHI, H. AKIMOTO, and T. IWAMURA, “Large-Scale Multi-Dimensional Phenomena Found in CCTF and SCTF Experiments,” Nucl. Eng. Des., 145, 85 (1993).
  • P. WEISS, R. EMMERLING, R. HERTLEIN, and J. LIEBERT, “UPTF Experiment Refined PWR LOCA Thermal-Hydraulic Scenarios: Conclusions from a Full-Scale Experimental Program,” Nucl. Eng. Des., 149, 335 (1994).
  • S. CHO, S. K. MOON, S. Y. CHUN, B. D. KIM, J. K. PARK, and W. P. BAEK, “Preliminary Descriptions on the 6 × 6 Reflood Test of KAERI—Part I: Overview of the Test Facility and Matrix,” presented at Korean Nuclear Society 2005 Fall Meeting, Busan, Korea, 2005.
  • S. CHO, S. K. MOON, K. Y. CHOI, S. Y. CHUN, M. K. CHUNG, and W. P. BAEK, “Rewetting of Vertical Hot Surface in a Centrally Heated Annulus and a 6 × 6 Rod Bundle Geometry During Reflood Phase,” Proc. 14th Int. Conf. Nuclear Engineering (ICONE-14), Miami, Florida, July 17–20, 2006, ASME (2006).
  • E. R. ROSAL, T. F. LIN, I. S. McCLELLAN, and R. C. BREWER, “Rod Bundle Heat Transfer (RBHT) Test Facility Description Report,” Department of Mechanical Engineering, The Pennsylvania State University.
  • S. ERGUN, “Modeling of Dispersed Flow Film Boiling with Two Flow, Five Field Eulerian-Eulerian Approach and Effects of Spacer Grids on Heat Transfer,” PhD Thesis, The Pennsylvania State University (2006).
  • B. D. CHUNG, S. W. BAE, J. J. JEONG, and S. M. LEE, “Development and Assessment of Multi-Dimensional Flow Models in the Thermal-Hydraulic System Analysis Code MARS,” KAERI/TR-3011/2005, Korea Atomic Energy Research Institute (2005).
  • “RELAP50MOD3.2.1 Code Manual,” NUREG/CR-5535, Idaho National Engineering Laboratory (1998).
  • M. J. THURGOOD and M. J. GEORGE, “COBRA/TRAC: A Thermal-Hydraulics Code for Transient Analysis of Nuclear Reactor Vessels and Primary Coolant Systems,” NUREG/CR-3046, U.S. Nuclear Regulatory Commission (1983).
  • “MARS Code Manual Volume I: Code Structure, System Models, and Solution Methods,” KAERI/TR-2812/2004, Korea Atomic Energy Research Institute (2004).
  • J. C. CHEN, K. SUNDARAM, and T. OZKAYNAK, “A Phenomenological Correlation for Post-CHF Heat Transfer,” NUREG-0237, U.S. Nuclear Regulatory Commission (1977).
  • L. A. BROMLEY, “Heat Transfer in Stable Film Boiling,” Chem. Eng. Prog., 46, 221 (1950).
  • G. Th. ANALYTIS, “Study of the Post-CHF Wall Heat Transfer Package of RELAP5/MOD3.3 During Blow-Down,” Ann. Nucl. Energy, 31, 1053 (2004).
  • G. Th. ANALYTIS, “Developmental Assessment of RELAP5/MOD3.1 with Separate Effect and Integral Test Experiments: Model Changes and Options,” Nucl. Eng. Des., 163, 125 (1996).
  • “RELAP5-3D Code Manual Volume IV: Models and Correlations,” INEEL-EXT-98-00834, Rev. 2.4, Idaho National Engineering and Environmental Laboratory (2005).
  • J. WEISMANN, “Studies of Transition Boiling Heat Transfer at Pressures from 1–4 Bar,” EPRI NP-1899, Electric Power Research Institute (1981).
  • R. P. FORSLUND and W. M. ROHSENOW, “Dispersed Flow Film Boiling,” J. Heat Transfer, 90, 399 (1968).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.