Advanced Cable-Testing Techniques for Nuclear Power Plants

References

• R. F. GAZDZINSKI, W. M. DENNY, and R. BUTWIN, “Aging Management Guideline for Commercial Nuclear Power Plants—Electrical Cable and Terminations,” SAND96-0344, Sandia National Laboratories (Sep. 1996).
   Google Scholar
• “Advanced Instrumentation and Maintenance Technologies for Nuclear Power Plants,” NUREG/CR-5501, U.S. Nuclear Regulatory Commission (1998).
   Google Scholar
• M. J. JACOBUS, “Loss-of-Coolant Accident (LOCA) Testing of Aged Cables with Application to Nuclear Plant Life Extension,” Nucl. Eng. Des., 134, 2–3, 267 (May 1992).
   Google Scholar
• “Power Plant Practices to Ensure Cable Operability,” NP-7485 Research Projects 2814-08, Electric Power Research Institute (1992).
   Google Scholar
• “Inspection, Surveillance, and Monitoring of Electrical Equipment Inside Containment of Nuclear Power Plants with Applications to Electrical Cables,” NUREG/CR-4257 (ORNL/Sub/83-28915/1), U.S. Nuclear Regulatory Commission (Aug. 1985).
   Google Scholar
• “Management of Life Cycle and Aging at Nuclear Power Plants: Improved I&C Maintenance,” TECDOC-1402, p. 100, International Atomic Energy Agency (Aug. 2004).
   Google Scholar
• IEC 62342, “Nuclear Power Plants—Instrumentation Safety—Management of Ageing,” International Electrotechnical Commission (2007–2008).
   Google Scholar
• “Assessment and Management of Aging of Major Nuclear Power Plant Components Important to Safety: In-Containment Instrumentation and Control Cables,” Vol. I, IAEATECDOC-1188, International Atomic Energy Agency (Dec. 2000).
   Google Scholar
• IEC 62465, “Nuclear Power Plants—Instrumentation and Control Important to Safety—Management of Aging of Electrical Cabling Systems,” International Electrotechnical Commission (2008).
   Google Scholar
• “Essential Elements of an Electric Cable Condition Monitoring Program,” NUREG/CR7000, BNL-NUREG-90318-2009, U.S. Nuclear Regulatory Commission (2010).
   Google Scholar
• V. A. CHERNYSHEV, YU A. SAFRONENKOV, A. A. GORDILOVSKII, and V. A. CHERNOV, “Modern Approaches to Evaluate the State of Insulation of High Voltage Machines,” Russian Electrical Engineering, 79, 4, 186 (Apr. 2008).
   Google Scholar
• “Demonstration of Wireless Technology for Equipment Condition Assessment, Application at TXU Comanche Peak Steam Electric Station,” EPRI 1011826, Electric Power Research Institute (2005).
   Google Scholar
• ASTM D2633, “Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable,” ASTM International.
   Google Scholar
• ASTM D3895, “Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry,” ASTM International.
   Google Scholar
• ASTM D4565, “Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable,” ASTM International.
   Google Scholar
• ASTM 2765, “Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics,” ASTM International.
   Google Scholar
• H. M. HASHEMIAN, “Sensor Performance and Reliability,” Instrumentation, Systems, and Automation Society (2005).
   Google Scholar
• IEEE 400, “IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage,” Institute of Electrical and Electronics Engineers.
   Google Scholar
• IEEE 943, “IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems,” Institute of Electrical and Electronics Engineers.
   Google Scholar
• ASTM D149, “Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies,” ASTM International.
   Google Scholar
• ASTM D3755, “Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress,” ASTM International.
   Google Scholar
• H. L. WILLIS, G. V. WELCH, and R. R. SCHRIEBER, Aging Power Delivery Infrastructures, Marcel Dekker, New York (2001).
   Google Scholar
• W. A. THUE, Electrical Power Cable Engineering, 2d ed., Marcel Dekker, New York (2003).
   Google Scholar
• P. GILL, Electrical Power Equipment Maintenance and Testing, 2d ed., CRC Press, Boca Raton, Florida (2009).
   Google Scholar
• R. LOFARO, P. SOO, M. VILLARAN, and E. GROVE, “Using Condition Monitoring to Predict Remaining Life of Electric Cables,” BNL-NUREG68237, U.S. Nuclear Regulatory Commission (2001).
   Google Scholar
• S. KARLIN, “Greg Allan: The Cable Guy to the Rescue,” in “The Institute,” Vol. 32, p. 2 (2008).
   Google Scholar
• H. M. HASHEMIAN, Maintenance of Process Instrumentation in Nuclear Power Plants, Springer-Verlag, Berlin (2006).
   Google Scholar
• C. FURSE, Y. CHUNG, C. LO, and P. PENDAYALA, “A Critical Comparison of Reflectometry Methods for Location of Wiring Faults,” J. Smart Structures Syst., 2, 1, 25 (2006).
   Google Scholar
• F. AUZANNEAU, M. OLIVAS, and N. RAVOT, “A Simple and Accurate Model for Wire Diagnosis Using Reflectometry,” Proc. Progress Electromagnetics Research Symp., Prague, Czech Republic, August 27–30, 2007, p. 232 (2007).
   Google Scholar
• P. F. FANTONI and G. J. TOMAN, “Wire System Aging Assessment and Condition Monitoring Using Line Resonance Analysis (LIRA),” Proc. NPIC&HMIT 2006 Conference, Albuquerque, New Mexico, November 12–16, 2006, American Nuclear Society (2006).
   Google Scholar
• ANALYSIS AND MEASUREMENT SERVICE CORP., “SBIR Phase II Proposal:AHolistic Approach for In-Situ Cable Condition Monitoring in Nuclear Power Plants,” DE-FOA-0000363, U.S. Department of Energy (June 2010).
   Google Scholar