137
Views
7
CrossRef citations to date
0
Altmetric
Technical Paper

Meeting the Needs of a Nuclear-Renewables Electrical Grid with a Fluoride-Salt–Cooled High-Temperature Reactor Coupled to a Nuclear Air-Brayton Combined-Cycle Power System

&
Pages 281-295 | Published online: 20 Mar 2017

REFERENCES

  • C. W. Forsberg et al., “Fluoride Salt Cooled High-Temperature Reactors (FHRs) for Base Load and Peak Electricity, Grid Stabilization, and Process Heat,” MIT-ANP-TR-147, Massachusetts Institute of Technology Center for Advanced Nuclear Energy Systems (2013); https://canes.mit.edu/publications/fluoride-salt-cooled-high-temperature-reactors-fhrs-base-load-and-peak-electricity-grid (current as of Apr. 11, 2013).
  • “Nuclear Energy and Renewables: System Effects in Low-Carbon Electricity Systems,” NEA No. 7056, Organisation for Economic Co-operation and Development, Nuclear Energy Agency (2012).
  • J. H. Williams et al., “The Technology Path to Deep Greenhouse Gas Emissions Cuts by 2050: The Pivotal Role of Electricity”, Science, 335, 6064, 53 (2012).
  • P. Denholm and R. M. Margolis, “Evaluating the Limits of Solar Photovoltaics (PV) in Traditional Electric Power Systems”, Energy Policy, 35, 2852 (2007).
  • P. Denholm et al., “Quantifying Avoided Fuel Use and Emissions from Solar Photovoltaic Generation in the Western United States”, Environ. Sci. Technol., 43, 226 (2009).
  • P. Denholm et al., “The Role of Energy Storage with Renewable Electricity Generation,” NREL/TP-6A2-47187, National Renewable Energy Laboratory (2010).
  • J. F. DeCarolis and D. W. Keith, “The Economics of Large-Scale Power in a Carbon Constrained World”, Energy Policy, 34, 395 (2006).
  • I. Oloyede, “Design and Evaluation of Seasonal Storage Hydrogen Peak Electricity Supply System,” MS Thesis, Massachusetts Institute of Technology, Cambridge, Massachusetts (2011).
  • C. W. Forsberg, “Hybrid Systems to Address Seasonal Mismatches Between Electricity Production and Demand in a Nuclear-Renewable Grid”, Energy Policy, 62, 333 (2013).
  • G. Haratyk and C. W. Forsberg, “Nuclear-Renewables Energy System for Hydrogen and Electricity Production”, Nucl. Technol., 178, 1, 66 (2012).
  • V. K. Varma et al., “AHTR Mechanical, Structural, and Neutronic Preconceptual Design,” ORNL/TM-2012/320, Oak Ridge National Laboratory (2012).
  • R. Scarlat, C. Andreades, and P. F. Peterson, “Nuclear Air Combined Cycle (NACC) Power Conversion Technology for the Pebble Bed Fluoride-Salt-Cooled High-Temperature Reactor (PB-FHR),” Proc. Nuclear Hybrid Energy Systems CORE Workshop, Idaho National Laboratory, Idaho, July 24-25, 2013.
  • D. Curtis, M. Short, and C. W. Forsberg, “Fluoride-Salt-Cooled High-temperature Reactor Market Strategy with Peak Electricity and Process Heat,” Proc. ICAPP 2013, Jeju Island, Korea, April 4-18, 2013, paper FA238.
  • C. W. Forsberg and D. Curtis, “Nuclear Air-Brayton Combined Cycle (NACC) with Natural Gas Peak Power,” Proc. ASME Power Conf., Boston, Massachusetts, July 29-August 1, 2013, paper Power2013-98119.
  • A. Almasi, “Integrating Gas Turbines into CPI Facilities”, Chem. Eng, 120, 3, 52 (2013).
  • P. F. Peterson, H. Zhao, and R. Petroski, “Metal and Concrete Inputs for Several Nuclear Power Plants,” UCBTH-05-001, University of California at Berkeley (2005).
  • T. Nordhaus, J. Lovering, and M. Shellenberger, “How to Make Nuclear Cheap,” Breakthrough Institute, Oakland, California (2013).
  • E. Hoffman and F. Ganda, “The Advanced Fuel Cycle Cost Basis for Reactor Technologies”, Trans. Am. Nucl. Soc, 108, 101 (2013).
  • B. Dixon et al., “Advanced Fuel Cycle Cost Basis (2012 Addendum),” INL/EXT-13-28626, Rev. 1, Idaho National Laboratory (2013).
  • “Technology and Applied R&D Needs for Electrical Energy Storage,” in “Basic Research Needs for Electrical Energy Storage,” Basic Energy Sciences Workshop on Electrical Energy Storage, Washington D.C., April 2-4, 2007, U.S. Department of Energy (2007).
  • A. P. Fraas and A. W. Savolainen, “Design Report on the Aircraft Reactor Test,” ORNL-2095, Oak Ridge National Laboratory (1956).
  • C. W. Forsberg, P. F. Peterson, and P. S. Pickard, “Molten-Salt-Cooled Advanced High-Temperature Reactor for Production of Hydrogen and Electricity”, Nucl. Technol., 144, 289 (2003).
  • M. P. Short, R. G. Ballinger, and C. W. Forsberg, “Bi-Metallic Composites to Raise Peak Temperatures of the Fluoride-Salt-Cooled High-temperature Reactor (FHR)”, Trans. Am. Nucl. Soc., 108, 350 (2013).
  • N. N. Andrews and C. W. Forsberg, “Tritium Management in Fluoride-Salt-Cooled High-Temperature Reactors (FHRs)”, Trans. Am. Nucl. Soc, 107, 391 (2012).
  • T. J. Dolan, G. R. Longhurst, and E. Garcia-Otero, “A Vacuum Disengager for Tritium Removal from HYLIFE-II Reactor FLIBE,” EGG-M-91508, Idaho National Laboratory (1992).
  • G. T. Mays, A. N. Smith, and J. R. Engel, “Distribution and Behavior of Tritium in the Coolant-Salt Technology Facility,” ORNL/TM-5759, Oak Ridge National Laboratory (1977).
  • D. C. Schluderberg et al., “Thermal and Mechanical Design of a Double-Wall Steam Generator,” Proc. 5th Topl. Mtg. Technology of Fusion Energy, Knoxville, Tennessee, April 26-28, 1983, UWFDM-0519, American Nuclear Society.
  • L. Gilman and C.W. Forsberg, “Optimum DoubleWall Heat Exchanger for Containment and Trapping of Tritium in a Salt-Cooled Reactor”, Trans. Am. Nucl. Soc., 109, 1071 (2013).
  • L. Wang, N. Stuckert, and R. T. Yang, “Unique Hydrogen Absorption Properties of Graphene”, AIChE J, 57, 10, 2902 (2011).
  • M. J. Minck and C. W. Forsberg, “Fluoride-Salt-Cooled High-Temperature Reactor Severe Accident Strategy with Vessel Insulation Designed to Fail,” Proc. ICAPP 2013, Jeju Island, Korea, April 14-18, 2013, paper FA244.
  • V. Dostal, P. Hejzlar, and M. J. Driscoll, “The Supercritical Carbon Dioxide Power Cycle: Comparison to Other Advanced Power Cycles”, Nucl. Technol., 154, 283 (2006).
  • V. Dostal, P. Hejzlar, and M. J. Driscoll, “HighPerformance Supercritical Carbon Dioxide Cycle for Next-Generation Nuclear Reactors”, Nucl. Technol., 154, 265 (2006).
  • T. Conboy, J. Pasch, and D. Fleming, “Control of a Supercritical CO2 Recompression Brayton Cycle Demonstration Loop,” Proc. ASME Turbo Expo 2013: GT2013, San Antonio, Texas, June 3-7, 2013, GT2013-94512.