78
Views
3
CrossRef citations to date
0
Altmetric
Technical Paper

Transient Analysis of Depressurized Loss-of-Forced-Circulation Accident Without Scram in High-Temperature Gas-Cooled Reactor

, , , &
Pages 227-238 | Published online: 20 Mar 2017

REFERENCES

  • R. Schulten, “Pebble Bed HTRs”, Ann. Nucl. Energy, 5, 357 (1978); http://dx.doi.org/10.1016/0306-4549(78)90019-1.
  • P. M. Williams et al., “MHTGR Development in the United Sates”, Prog. Nucl. Energy, 28, 3, 265 (1994); http://dx.doi.org/10.1016/0149-1970(94)90002-7.
  • M. Ogawa and T. Nishihara, “Present Status of Energy in Japan and HTTR Project”, Nucl. Eng. Des., 233, 1–3, 5 (2004); http://dx.doi.org/10.1016ZJ.nucengdes.2004.07.018.
  • Z. Wu and S. Yu, “HTGR Projects in China”, Nucl. Eng. Technol., 39, 2, 103 (2007); http://dx.doi.org/10.5516/NET.2007.39.2.103.
  • S. Katanishi and K. Kunitomi, “Safety Evaluation on the Depressurization Accident in the Gas Turbine High Temperature Reactor (GTHTR300)”, Nucl. Eng. Des., 237, 12–13, 1372 (2007); http://dx.doi.org/10.1016/j.nucengdes.2006.09.037.
  • P. K. Kroeger, “Safety Evaluations of Accident Scenarios in High Temperature Gas-Cooled Reactors”, Nucl. Eng. Des., 122, 443 (1990); http://dx.doi.org/10.1016/0029-5493(90)90227-O.
  • H. van Dam, “Role of Neutron Sources, Xenon, and Decay Heat Dynamics in Autonomous Reactor Shutdown and Recriticality”, Nucl. Sci. Eng., 129, 273 (1998).
  • “RELAP5/MOD3 Code Manuals,” NUREG/CR-5535, U.S. Nuclear Regulatory Commission (1995).
  • K. Kunitomi et al., “Japan’s Future HTR—The GTHTR300”, Nucl. Eng. Des., 233, 1–3, 309 (2004); http://dx.doi.org/10.1016/j.nucengdes.2004.08.026.
  • S. Katanishi et al., “Feasibility Study on High Burnup Fuel for Gas Turbine High Temperature Reactor (GTHTR300)”, Trans. AESJ, 1, 4, 373 (2002).
  • Y. Inagaki et al., “R&D on Thermal Hydraulics of Core and Core-Bottom Structure”, Nucl. Eng. Des., 233, 1–3, 173 (2004); http://dx.doi.org/10.1016/j.nucengdes.2004.08.007.
  • S. W. Churchill, “Free Convection in Layers and Enclosures,” Heat Exchanger Design Handbook, Vol. 2.5.8, E. U. SchlüNder et al., Eds., Hemisphere Publishing Corporation (1983).
  • J. R. Lamarsh and A. J. Baratta, Introduction to Nuclear Engineering, 3rd ed., Prentice Hall (2001).
  • ANSI/ANS-5.1-1979, “Decay Heat Power in Light Water Reactors,” American Nuclear Society, La Grange Park, Illinois.
  • C. B. Davis, “Evaluation of the Use of Existing RELAP5-3D Models to Represent the Actinide Burner Test Reactor,” INL-EXT-07-12228, Idaho National Laboratory (2007).
  • J. Sumita et al., “Development of an Evaluation Model for the Thermal Annealing Effect on Thermal Conductivity of IG-110 Graphite for High-Temperature Gas-Cooled Reactors”, J. Nucl. Sci. Technol., 46, 7, 690 (2009); http://dx.doi.org/10.1080/18811248.2007.9711576.
  • T. Kikuchi, K. Iwamoto, and K. Ikawa, “Measurement of Heat Transfer Properties of HTGR Fuel Pin by Capsule Irradiation (I),” JAERI-M, 82 (1982).
  • ASME Boiler and Pressure Vessel Code, Sec. II, “Materials,” Part D, “Properties,” American Society of Mechanical Engineers, New York (2010).
  • S. Maruyama et al., “Temperature Analysis of Control Rod for HTTR,” JAERI-M, 90 (1990).
  • K. Kunitomi et al., “Depressurization Accident Analysis for the FTTR by the TAC-NC”, Energy, 16, 1–2, 471 (1991); http://dx.doi.org/10.1016/0360-5442(91)90126-7.
  • R. B. Bird, W. E. Stewart, and E. N. Lightfoot, Transport Phenomena, Wiley & Sons, Inc. (2007).
  • Dennetsu Handbook, Chap. 6, K. Katayama et al., Eds., Japan Society of Mechanical Engineers (1993).
  • G. Cao et al., “In Situ Measurements of Spectral Emissivity of Materials for Very High Temperature Reactors”, Nucl. Technol., 175, 2, 460 (2011).
  • Y. S. Touloukian and D. P. DeWitt, Thermophysical Properties of Matter, Vol. 8, Thermal Radiative Properties, Nonmetallic Solids, Plenum Publishing Co. (1972).
  • K. Yamashita et al., “Nuclear Design of the High-Temperature Engineering Test Reactor (HTTR),” Nucl. Sci. Eng., 122, 212 (1996).
  • K. Kunitomi, S. Nakagawa, and H. Itakura, “Thermal Transient Analysis During a Depressurization Accident in the High Temperature Engineering Test Reactor (HTTR),” JAERI-M, 91 (1991).
  • S. Nakagawa, A. Saikusa, and K. Kunitomi, “Development of a Simulation Model and Safety Evaluation for a Depressurization Accident Without Reactor Scram in an Advanced HTGR”, Nucl. Technol., 133, 2, 141 (2001).
  • S. Takada et al., “Test Plan Using HTTR (High Temperature Engineering Test Reactor),” Proc. 6th Int. Topl. Mtg. High Temperature Reactor Technology (HTR2012), Tokyo, Japan, October 28-November 1, 2012, HTR2012-7-004.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.