36
Views
2
CrossRef citations to date
0
Altmetric
Technical Paper

Method for Analyzing Fission Gas Release in Fuel Rods Based on Gamma-Ray Measurements of Short-Lived Fission Products

, , , &
Pages 96-106 | Published online: 20 Mar 2017

References

  • Y. PONTILLON et al., “Experimental and Theoretical Investigation of Fission Gas Release from UO2 up to 70 GWd/t Under Simulated LOCA Type Conditions: The GASPARD PROGRAM,” Proc. 2004 Int. Mtg. LWR Fuel Performanc., Orlando, Florida, September 19–22, 2004.
  • Y. LONG, Y. YUAN, A. ROMANO, and M. S. KAZIMI, “Fission Gas Release of Heterogeneous Fuels for Plutonium Burning,” Proc. 2004 Int. Mtg. LWR Fuel Performanc., Orlando, Florida, September 19–22, 2004.
  • W. LIU, A. ROMANO, and M. S. KAZIMI, “Modelling High-Burnup LWR Fuel Fission Gas Release and Swelling During Fast Transients,” Proc. 2004 Int. Mtg. LWR Fuel Performanc., Orlando, Florida, September 19–22, 2004, American Nuclear Society (2004).
  • K. UNE, S. KASHIBE, and A. TAKAGI, “Fission Gas Release Behavior from High Burnup UO2 Fuels at Rapid Heating Conditions,” Proc. 2005 Int. Mtg. LWR Fuel Performanc., Kyoto, Japan, October 2–6, 2005.
  • L. NOIROT, “MARGARET: An Advanced Mechanistic Model of Fission Gas Release Behavior in Nuclear Fuel,” Proc. 2005 Int. Mtg. LWR Fuel Performanc., Kyoto, Japan, October 2–6, 2005.
  • G. ZHOU et al., “Fuel Performance Experience, Analysis and Modeling: Deformations, Fission Gas Release and Pellet-Clad Interaction,” Proc. 2007 Int. LWR Fuel Performance Mtg., San Francisco, California, September 30–October 3, 2007.
  • F. LEMOINE and Y. GUÉRIN, “Isotopic Composition of Fission Gas Release from MOX Fuel and Microstructure Effect,” Proc. Top Fuel 200., Paris, France, September 6–10, 2009.
  • B.-H. LEE, Y.-H. KOO, H.-S. KIM, J.-Y. OH, Y.-W. TAHK, and D.-S. SOHN, “Recovery of Thermal Conductivity of MOX Fuel with Fission Gas Release,” Proc. 2010 LWR Fuel Performance/TopFuel/WRFP., Orlando, Florida, September 26–29, 2010, American Nuclear Society (2010).
  • J. WANG, Y. HAN, Q. REN, T. LIU, and Y. ZHOU, “Simulation of Fission Gas Release During Bump Test by Copernic Code,” Proc. 2011 Water Reactor Fuel Performance Mtg./ LWR/ Top Fue., Chengdu, China, September 11–14, 2011.
  • S.-D. PARK, H.-M. KWON, H.-S. SEO, Y.-K. HA, and K. SONG, “Investigations of Fission Gas Distribution Characteristics in a Spent Fuel Rod,” Proc 2012 Top Fuel Reactor Fuel Performance Mtg., Manchester, U.K., September 2–6, 2012.
  • G. KHVOSTOV, “A Dynamic Model for Fission Gas Release and Gaseous Swelling Integrated into the FALCON Fuel Analysis and Licensing Code,” Proc. Top Fuel 200., Paris, France, September 6–10, 2009.
  • Y.-H. KOO, J.-Y. OH, B.-H. LEE, Y.-W. TAHK, I.-S. LIM, and K.-W. SONG, “Modeling of Fission Gas Release in LWR UO2 Fuel Under RIA Conditions Using Artificial Neural Network Method,” Proc. Top Fuel 200., Paris, France, September 6–10, 2009.
  • J. PAPIN, M. PETIT, C. GRANDJEAN, and V. GEORGENTHUM, “IRSN R&D Studies on High Burnup Fuel Behavior Under RIA and LOCA Conditions,” Proc. 2006 Int. Mtg. LWR Fuel Performanc., Salamanca, Spain, October 22–26, 2006.
  • T. FUKETA, T. SUGIYAMA, M. UMEDA, K. TOMIYASU, and H. SASAJIMA, “Behavior of High Burnup PWR Fuels During Simulated Reactivity-Initiated Accident Conditions,” Proc. 2006 Int. Mtg. LWR Fuel Performanc., Salamanca, Spain, October 22–26, 2006.
  • W. LIU and M.S. KAZIMI, “Modeling Fission Gas Effects on High Burnup Fuel Behavior During RIA,” Proc. 2006 Int. Mtg. LWR Fuel Performanc., Salamanca, Spain, October 22–26, 2006.
  • K. GEELHOOD and C. BEYER, “A New Fission Gas Release Model for Predicting Gas Release During Steady State and Slow Power Ramps and for Initializing Fast Transients,” Proc. 2007 Int. LWR Fuel Performance/Top Fuel Mtg., San Francisco, California, September 30–October 3, 2007, American Nuclear Society (2007).
  • M. MARCET, L. DESGRANGES, I. FÉLINES, and Y. PONTILLON, “Correlation Between Microstructure Changes and Fission Gas Release Mechanism During a LOCA Type Experiment: An E.S.E.M. Investigation,” Proc. 2010 LWR Fuel Performance/TopFuel/WRFP., Orlando, Florida, September 26–29, 2010, American Nuclear Society (2010).
  • M. SUZUKI, Y. UDAGAWA, T. SUGIYAMA, and F. NAGASE, “Model Development and Verification for Fission Gas Inventory and Release from High Burnup LWR Fuel During Simulated Reactivity-Initiated Accident Experiments at NSRR,” Proc. 2012 Top Fuel Reactor Fuel Performance Mtg., Manchester, U.K., September 2–6, 2012.
  • H. WEISE, V. BOUTELLIER, J. KOBLER WALDIS and N. KIVEL, “Fuel Performance Program Part 2: Fission Gas Release and Analysis,” TM-43-08-01, Paul Scherrer Institute (2008).
  • Fuel Modelling at Extended Burnup (FUMEX-II),” Report of a Coordinated Research Project 2002-2007, IAEA-TECDOC-1687, International Atomic Energy Agency (2012).
  • J. KILLEEN, E. SARTORI, and T. TVERBERG, “FUMEX-III: A New IAEA Coordinated Research Project on Fuel Modelling at Extended Burnup,” Proc. Top Fuel 200., Paris, France, September 6–10, 2009.
  • J. SERNA, P. TOLONEN, S. ABETA, S. WATANABE, Y. KOSAKA, T. SENDO, and P. GONZALES, “Experimental Observations on Fuel Pellet Performance at High Burnup,” J. Nucl. Sci. Technol., 43, 9, 1 (2006).
  • C. VITANZA, V. GRAZIANI, N. T. F0DESTR0MMEN, and K. O. VILPPONEN, “Fission Gas Release from In-Pile Pressure Measurements,” OECD Halden Reactor Project, HPR-221.10, Paper 38 (1978).
  • I. MATSSON, P. JANSSON, B. GRAPENGIESSER, A. HÀKANSSON, and A. BÄCKLIN, “Fission Gas Release Determination Using an Anti-Compton Shield Detector,” Nucl. Technol., 122, 276 (1998).
  • B. GRAPENGIESSER and L. HALLSTADIUS, “NonDestructive Pool-Side Methods for Fission Gas Release Determination and Fuel Column Characterisation of Intact Fuel Rods,” Ninth Int. Conf. Nondestructive Evaluation in the Nuclear Industr., Tokyo, Japan, April 25–28, 1998.
  • T. R. BLAIR and L. F. VAN SWAM, “Nondestructive Determination of Fission Gas Release at Poolside,” Trans. Am. Nucl. Soc., 44, 237 (1983).
  • P. M. O’LEARY and D. R. PACKARD, “Nondestructive Fission Gas Release Measurement and Analysis,” Trans. Am. Nucl. Soc., San Diego, California, June 20–24, 1993.
  • S. HOLCOMBE, C. WILLMAN, A. KNUUTILA, and K. RANTA-PUSKA, “Experimental Fission Gas Release Determination at High Burnup by Means of Gamma Measurements on Fuel Rods in OL2,” Proc. Top Fuel 200., Paris, France, September 6–10, 2009.
  • K. RANTA-PUSKA, M. A. DUBECKY, R. A. RAND, J. J. SERNA, and A. KNUUTILA, “TVO’S Measurement Campaign for GE14 Lead Use Assemblies: Pursuing Higher Burn-up,” Proc. 2006 Int. Mtg. LWR Fuel Performanc., Salamanca, Spain, October 22–26, 2006.
  • I. MATSSON, B. GRAPENGIESSER, and B. ANDERS-SON, “LOKET-A Gamma-Ray Spectroscopy System for InPool Measurements of Thermal Power Distribution in Nuclear Fuel,” Nucl. Instrum. Meth.., 569, 872 (2006).
  • S. HOLCOMBE, “FPP-2 Fission Gas Release Measurements,” BTM 08-1260, Revision 0, Westinghouse (2008).
  • S. HOLCOMBE, K. EITRHEIM, S. JACOBSSON SVÄRD, L. HALLSTADIUS, and C. WILLMAN, “Feasibility of Performing Pool-Side Fission Gas Release Measurements on Fuel Rods with Short Decay Time,” Proc. 2011 Water Reactor Fuel Performance Mtg./LWR/Top Fue., Chengdu, China, September 11–14, 2011.
  • “HELIOS Methods. ProgramManual Review 1,” Program HELIOS-1.4, Studsvik-Scandpower (1998).
  • P. HOFFMAN and P. DEWES, “Power Transient Tests of High Burnup Fe-Enhanced Zr Liner Rodlets,” Proc. Top Fuel 200., Paris, France, September 6–10, 2009.
  • J. A. TURNBULL and R. J. WHITE, “The Thermal Performance of the Gas Flow Rigs: A Review of Experiments and Their Analyses,” HWR-715, OECD Halden Reactor Project (2002).
  • I. MATSSON, B. GRAPENGIESSER, and B. ANDERSSON, “On-Site g-Ray Spectroscopic Measurements of Fission Gas Release in Irradiated Nuclear Fuel,” Appl. Radiat. Isotope., 65, 1, 36 (2007).
  • S. HOLCOMBE, K. EITRHEIM, S. JACOBSSON SVÄRD, L. HALLSTADIUS, and C. WILLMAN, “Advanced Fuel Assembly Characterization Capabilities Based on Gamma Tomography at the Halden Boiling Water Reactor,” Proc. PHYSOR 201., Knoxville, Tennessee, April 15–20, 2012.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.