Evaluation of JSFR Key Technologies

References

• Aizawa K., “R&D for Fast Reactor Fuel Cycle Technologies in JNC,” Proc. GLOBAL 2001, Paris, France, September 9–13, 2001.
   Google Scholar
• Kotake S. et al., “Feasibility Study on Commercialized Fast Reactor Cycle Systems Current Status of the FR System Design,” Proc. GLOBAL 2005, Tsukuba, Japan, October 9–13, 2005.
   Google Scholar
• Okubo T. et al., “Conceptual Design for a Large-Scale Japan Sodium-Cooled Fast Reactor (3) Core Design in JSFR,” presented at Int. Congress on Advances in Nuclear Power Plants (ICAPP ’11), Nice, France, May 2–5, 2011.
   Google Scholar
• Ukai S. et al., “Development of 9Cr-ODS Martensitic Steel Claddings for Fuel Pins by Means of Ferrite to Austenite Phase Transformation,” J. Nucl. Sci. Technol., 39, 7, 778 (2002).
   Web of Science ®Google Scholar
• Ukai S. et al., “Characterization of High Temperature Creep Properties in Recrystallized 12Cr-ODS Ferritic Steel Claddings,” J. Nucl. Sci. Technol., 39, 8, 872 (2002).
   Web of Science ®Google Scholar
• Kaito T. et al., “Fuel Pin Irradiation Test at up to 5 at% Burnup in BOR-60 for Oxide-Dispersion-Strengthened Ferritic Steel Claddings,” J. Nucl. Sci. Technol., 46, 6, 529 (2009).
   Web of Science ®Google Scholar
• Kaito T. et al., “The Tentative Materials Strength Standard of ODS Ferritic Steel Claddings,” JNC TN9400 2005-15, Japan Nuclear Cycle Development Institute (2005).
   Google Scholar
• Yoshitake T. et al., “Ring-Tensile Properties of Irradiated Oxide Dispersion Strengthened Ferritic0Martensitic Steel Claddings,” J. Nucl. Mater., 329–333, 342 (2004).
   Google Scholar
• Kaito T. et al., “In-Pile Creep Rupture Properties of ODS Ferritic Steel Claddings,” J. Nucl. Mater., 386–388, 294 (2009)
   Web of Science ®Google Scholar
• “A Technology Roadmap for Generation IV Nuclear Energy Systems,” GIF-002-00, U.S. Department of Energy (2002).
   Google Scholar
• “Guidance for the Evaluation of Innovative Nuclear Reactors and Fuel Cycles: Report of Phase 1A of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO),” IAEA-TECDOC-1362, International Atomic Energy Agency (2003).
   Google Scholar
• Yamano H. et al., “Conceptual Design for a Large-Scale Japan Sodium-Cooled Fast Reactor (2) Safety Design and Evaluation in JSFR,” presented at Int. Congress on Advances in Nuclear Power Plants (ICAPP ’11), Nice, France, May 2–5, 2011.
   Google Scholar
• Nakanishi S. et al., “Development of Passive Shutdown System for SFR,” Nucl. Technol., 170, 181 (2010).
   Web of Science ®Google Scholar
• Fujita K. et al., “Development of a Self-Actuated Shutdown System for Large-Scale JSFR,” Proc. 19th Int. Conf. Nuclear Engineering (ICONE19), Osaka, Japan, October 24– 25, 2011.
   Google Scholar
• Sato I., Yamano H., and Tobita Y., “Development of Severe Accident Evaluation Technology (Level 2 PSA) for Sodium-Cooled Fast Reactors (2) Identification of Dominant Factors in Initiating Phase of Unprotected Events,” Proc. Int. Congress on Advances in Nuclear Power Plants (ICAPP’09), Tokyo, Japan, May 10–14, 2009, Atomic Energy Society of Japan (2009).
   Google Scholar
• Sato I. et al., “Elimination of Severe Recriticality Events in the Core Disruptive Accident of JSFR Aiming at In-Vessel Retention of the Core Materials,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009, International Atomic Energy Agency (2009).
   Google Scholar
• Konishi K. et al., “The Result of a Wall Failure In-Pile Experiment Under the EAGLE Project,” Nucl. Eng. Des., 237, 2165 (2007).
   Web of Science ®Google Scholar
• Koyama K. et al., “Development of Severe Accident Evaluation Technology (Level 2 PSA) for Sodium-Cooled Fast Reactors (4) Identification of Dominant Factors in Core Material Relocation and Heat Removal Phases,” Proc. Int. Congress on Advances in Nuclear Power Plants (ICAPP’09), Tokyo, Japan, May 10–14, 2009, Atomic Energy Society of Japan (2009).
   Google Scholar
• Hara T., Kosugi H., and Abe S., “JOYO Construction and Preoperational Test Experience,” Proc. Int. Conf. Advanced Nuclear Energy Systems, Pittsburgh, Pennsylvania, March 14–17, 1976, American Society of Mechanical Engineers (1976).
   Google Scholar
• Yokota Y. et al., “Design and Construction of the Reactor Structure of the Prototype Fast Breeder Reactor Monju,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles, Kyoto, Japan, October 28–November 1, 1991.
   Google Scholar
• Iida K. et al., “Construction Codes for Prototype FBR MONJU,” NED 98, pp. 283–288 (1987).
   Google Scholar
• Takakura K. et al., “Development of Elevated Temperature Structural Design Guide for Japanese Demonstration Breeder Reactor,” Nucl. Eng. Des., 155, 559 (1995).
   Google Scholar
• Kasahara N. et al., “Recent Developments for Fast Reactor Structural Design Standard (FDS),” presented at SMiRT 18, Beijing, China, August 7–12, 2005.
   Google Scholar
• Wada H. et al., “Proposal of a New Estimation Method for the Thermal Ratcheting of a Cylinder Subjected to a Moving Temperature Distribution,” Nucl. Eng. Des., 139, 261 (1993).
   Google Scholar
• “Regulatory Guide for Reviewing Seismic Design of Nuclear Power Reactor Facilities,” NSCRG:L-DS-I.02, Nuclear Safety Commission of Japan (2006).
   Google Scholar
• Kamide H. et al., “Investigation on Slit Jet Through Upper Internal Structure (UIS) in Highly Compact Vessel of Sodium-Cooled Fast Reactor,” J. Nucl. Sci. Technol., 47, 9, 810 (2010).
   Web of Science ®Google Scholar
• Etoh M. et al., “Japan Conceptual Design Study of JSFR (2) Reactor System,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• Oyama K., Watanabe O., and Yamano H., “Conceptual Design for Japan Sodium-Cooled Fast Reactor (2) Thermal-Hydraulic Design for Reactor Upper Sodium Plenum in JSFR,” Proc. Int. Congress on Advances in Nuclear Power Plants (ICAPP’09), Tokyo, Japan, May 10–14, 2009, Atomic Energy Society of Japan (2009).
   Google Scholar
• Kobayashi J. et al., “Study on Thermal Striping at UIS of Advanced Loop Type Fast Reactor,” presented at 17th Int. Conf. Nuclear Engineering (ICONE17), Brussels, Belgium, July 12–16, 2009.
   Google Scholar
• Kimura N. et al., “Experimental Study on Gas Entrainment at Free Surface in Reactor Vessel of a Compact Sodium-Cooled Fast Reactor,” J. Nucl. Sci. Technol., 45, 10, 1053 (2008).
   Web of Science ®Google Scholar
• Fujii T. et al., “Thermal-Hydraulic Design for Reactor Upper Plenum and Large Diameter Piping for an Innovative Sodium-Cooled Fast Reactor,” presented at 13th Int. Conf. Nuclear Engineering (ICONE13), Beijing, China, May 16–20, 2005.
   Google Scholar
• Hamada N. et al., “Development of Computational Method for Predicting Vortex Cavitation in the Reactor Vessel of JSFR,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• Katoh A. et al., “Development of Advanced Fuel Handling Machine for JSFR,” J. Nucl. Sci. Technol., 47, 7, 642 (2010).
   Web of Science ®Google Scholar
• Yamano H. et al., “Technological Feasibility of Two Loop Cooling System in JSFR,” Nucl. Technol., 170, 159 (2010).
   Web of Science ®Google Scholar
• Wakai T. et al., “Creep Strength Evaluation of Welded Joint Made of Modified 9Cr-1Mo Steel for Japanese Sodium Cooled Fast Reactor (JSFR),” Proc. Pressure Vessels and Piping Conf., Bellevue, Washington, July 18–22, 2010, American Society of Mechanical Engineers (2010).
   Google Scholar
• Yamano H. et al., “Unsteady Hydraulic Characteristics in Large-Diameter Pipings with Elbow for JSFR (1) Current Status of Flow-Induced Vibration Evaluation Methodology Development for the JSFR Pipings,” Proc. 13th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics (NURETH-13), Kanazawa, Japan, September 27–October 2, 2009.
   Google Scholar
• Wakai T. et al., “Development of LBB Assessment Method for Japanese Sodium-cooled Fast Reactor (JSFR) Pipes (1) Study on the Premise for the Standardization of Assessment Procedure,” Proc. Pressure Vessels and Piping Conf., Bellevue, Washington, July 18–22, 2010, American Society of Mechanical Engineers (2010).
   Google Scholar
• Ohtaka M. and Hayashida H., “Study on Measurement Technique for Sodium Aerosols Based on Laser Induced Breakdown Spectroscopy,” JNC Review, 18-3, p. 23, Japan Nuclear Cycle Development Institute (2003).
   Google Scholar
• Hayafune H. et al., “Development of the Integrated IHX/Pump Component 1/4-Scale Vibration Testing,” presented at 14th Int. Conf. Nuclear Engineering (ICONE14), Miami, Florida, July 17–20, 2006.
   Google Scholar
• Handa T. et al., “Research and Development for the Integrated IHX0Pump,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• Kisohara N. et al., “Conceptual Design Study for the Demonstration Reactor of JSFR (5) Reactor Cooling System Design,” Proc. 19th Int. Conf. Nuclear Engineering (ICONE19), Osaka, Japan, October 24–25, 2011.
   Google Scholar
• Tanabe H. et al., “Analysis Code for Failure Propagation of Steam Generator Tube—LEAP II,” PNCTN952 82-04, Power Reactor and Nuclear Fuel Development Corp. (1982) (in Japanese).
   Google Scholar
• Hamada H. and Tanabe H., “A Study of the Selection of Rational Design Basis Leak,” PNC TN9410 92-097, Power Reactor and Nuclear Fuel Development Corp. (1992) (in Japanese).
   Google Scholar
• Ono I. and Kurihara A., “Quasi-Steady Pressure Analysis in Intermediate Water Leak Rate with SWAC-13 Module in SWACS Code,” JNC TN9400 2005-047, Japan Nuclear Cycle Development Institute (2005) (in Japanese).
   Google Scholar
• Kurome K. et al., “Steam Generator with Straight Double Walled Tube—Development of Fabrication Technologies of Main Structures Made of High Chrome Steel-Made,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• Ohyama K. et al., “Decay Heat Removal System by Natural Circulation for JSFR,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• Kamide H. et al., “Sodium Experiments on Decay Heat Removal Systems of Japan Sodium Cooled Fast Reactor— Start-Up Transient of Decay Heat Removal System,” presented at Seventh Korea-Japan Symp. Nuclear Thermal Hydraulics and Safety, Chuncheon, Korea, November 14–17, 2010.
   Google Scholar
• Kurisaka K., “Probabilistic Safety Assessment of Japanese Sodium Cooled Fast Reactor in Conceptual Design Stage,” Proc. 15th Pacific Basin Nuclear Conf. (PBNC-15), Sydney, Australia, October 15–20, 2006.
   Google Scholar
• Chikazawa Y. et al., “Conceptual Design Study for the Demonstration Reactor of JSFR (6) Fuel Handling System Design,” Proc. 19th Int. Conf. Nuclear Engineering (ICONE19), Osaka, Japan, October 24–25, 2011.
   Google Scholar
• Hara H. et al., “Japan Conceptual Design Study of JSFR (4) Reactor Building Layout,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• Katoh A. et al., “Experimental Investigations of Steel Plate Reinforced Concrete Bearing Wall for Fast Reactor Containment Vessel,” Proc. 19th Int. Conf. Nuclear Engineering (ICONE19), Osaka, Japan, October 24–25, 2011.
   Google Scholar
• Okamura S. et al., “Seismic Isolation Design for JSFR,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• Nishiyama N., “In-Service Inspection and Repair Program for Commercialized Sodium-Cooled Fast Reactor,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles (FR09), Kyoto, Japan, December 7–11, 2009.
   Google Scholar
• “Code for Nuclear Power Generation Facilities—Rules on Fitness-for-Service for Nuclear Power Plants,” JSME S NA1 2004, Japan Society of Mechanical Engineers (2004) (in Japanese).
   Google Scholar
• ASME Boiler and Pressure Vessel Code, Sec. XI, “Rules for Inservice Inspection of Nuclear Power Plant Components,” American Society of Mechanical Engineers, New York (2007); http://www.techstreet.com/standards/asme/section_xi?product_id=1284596 (current as of Apr. 25, 2012).
   Google Scholar
• Sakamoto Y. et al., “Development of Advanced Loop-Type Fast Reactor in Japan (3) Easy Inspection and High Reliable Reactor Structure in JSFR,” Proc. Int. Congress on Advances in Nuclear Power Plants (ICAPP ’08), Anaheim, California, June 8–12, 2008, American Nuclear Society (2008).
   Google Scholar