5
Views
1
CrossRef citations to date
0
Altmetric
Technical Paper

Analysis of Mechanical Work Energy for LMFBR Maximum Accidents

Pages 348-355 | Published online: 13 May 2017

REFERENCES

  • J. D. GEIER, “Fast Reactor Test Facility (FARET), Volume II—Summary of Preliminary Safety Analysis,” ANL-7168, Argonne National Laboratory (April 1966).
  • L. J. KOCH et al., “Hazard Summary Report—Experimental Breeder Reactor-II (EBR-II),” ANL-5719, Argonne National Laboratory (May 1957).
  • J. F. PROCTOR, “Adequacy of Explosion-Response Data in Estimating Reactor-Vessel Damage,” Nuclear Safety, 8 (November–December 1967).
  • V. Z. JANKUS, “A Theoretical Study of Destructive Nuclear Bursts in Fast Power Reactors,” ANL-6512, Argonne National Laboratory (February 1962).
  • “Enrico Fermi Atomic Power Plant, Technical Information and Hazards Summary Report, Part B, Volume 7,” NP-11526 (1961); Available from Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia.
  • “Preliminary Safeguards Summary Report, Southwest Experimental Fast Oxide Reactor, Part I,” NP-15077, General Electric Company (May 1965).
  • E. P. HICKS and D. C. MENZIES, “Theoretical Studies on the Fast Reactor Maximum Accident,” Proc. Conf. Safety, Fuels, and Core Design in Large Fast Power Reactors, October 11–14, 1965, ANL-7120, Argonne National Laboratory (1965).
  • A. E. KLICKMAN, “Summary of Energy Release Analyses of the Hypothetical Meltdown Design Accident for Core A of the Enrico Fermi Reactor,” APDA-LA-7, Atomic Power Development Associates, Inc. (July 1969).
  • A. E. WALTAR, R. A. HARRIS, and A. PADILLA Jr., “Considerations of Sodium Conditions and Molten Fuel/Sodium Interactions for Fast Reactor Excursion Calculations,” Trans. Am. Nucl. Soc., 11, 694 (1968).
  • G. H. GOLDEN and J. V. TOKAR, “Thermophysical Properties of Sodium,” ANL-7323, Argonne National Laboratory (August 1967).
  • O. A. HOUGEN, K. M. WATSON, and R. A. RAGATZ, Chemical Process Principles, Part II, Thermodynamics, p. 569, John Wiley and Sons Inc., New York (1959).
  • D. MILLER, A. B. COHEN, and C. E. DICKERMAN, “Estimation of Vapor and Liquid Density and Heat of Vaporization of Alkali Metals to the Critical Point,” Paper presented at the International Conference on the Safety of Fast Breeder Reactors, September 19–22, 1967, Aix-en-Provence, France.
  • “Lecture Series—Fast Reactor Safety Technology and Practices, Volume II—Accident Analysis,” Lecture No. XVII, Energy Release Mechanisms, BNWL-SA-3093, Battelle-Northwest (March 1970).
  • A. M. JUDD, “Calculation of the Thermodynamic Efficiency of Molten Fuel-Coolant Interactions,” Trans. Am. Nucl. Soc., 13, 369 (1970).
  • H. PFEFFERLEN, in “An Analytical Evaluation of the Consequences of a Hypothetical Instantaneous Loss of Coolant Flow to a Fast Flux Test Facility Driver Fuel Assembly,” Compiled by L. M. McWethy, GEAP-10059, General Electric Company (July 1969).
  • A. PADILLA Jr., “Transient Analysis of Fuel-Sodium Interaction,” Trans. Am. Nucl. Soc., 13, 375 (1970).
  • R. H. COLE, Underwater Explosions, p. 19, Dover Publications, Inc., New York (1948).
  • D. H. CHO and R. W. WRIGHT, “A Rate Limited Model of Molten Fuel-Coolant Interactions,” Trans. Am. Nucl. Soc., 13, 659 (1970).
  • D. H. CHO, R. O. IVINS, and R. W. WRIGHT, “Pressure Generation by Molten Fuel-Coolant Interactions Under LMFBR Accident Conditions,” ANS Topical Meeting, “New Developments in Reactor Mathematics and Applications,” March 29–31, 1971, Idaho Falls, Idaho.
  • D. H. CHO, W. L. CHEN, and R. W. WRIGHT, “Pressure Pulses and Mechanical Work from Molten Fuel-Coolant Interactions: A Parametric Study,” Trans. Am. Nucl. Soc., 14, 290 (1971).
  • S. E. VEYO, “An Analysis of Slug Propulsion for LMFBR Accidents,” Trans. Am. Nucl. Soc., 14, 291 (1971).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.