5
Views
0
CrossRef citations to date
0
Altmetric
Technical Paper

An Assessment of the Core Degradation Frequency in a Typical Large LMFBR Design for Internal Accident Initiators—A Comparison with PWR Predictions

, &
Pages 369-396 | Published online: 13 May 2017

References

  • L. CAVE, “Definition of Safety Criteria for the Clinch River Breeder Reactor,” UCLA-ENG-7692, University of California, Los Angeles, School of Engineering (1976).
  • “Reactor Safety Study: An Assessment of Accident Risks in U.S. Commercial Nuclear Power Plants,” WASH-1400 (NUREG-75/104), U.S. Nuclear Regulatory Commission (1975).
  • “CRBRP Safety Study: An Assessment of Accident Risks in the CRBRP,” Clinch River Breeder Reactor Plant (1977).
  • “LMFBR Conceptual Design Study, Design Safety Review Report,” CDS 400-7, Westinghouse Electric Corporation Advanced Reactor Division (1981).
  • “Safety Goals for Nuclear Power Plants: A Discussion Paper,” NUREG-0880, U.S. Nuclear Regulatory Commission (1982).
  • J. S. McDONALD and S. GOLAN, “LMFBR Pool Plant 1000 MWe,” EPRI NP-1015, Electric Power Research Institute (1979).
  • S. M. DAVIES and S. GOLAN, “Pool-Type LMFBR 1000 MWe,” EPRI NP-1014, Electric Power Research Institute (1979).
  • J. F. WETT and J. R. CHURCHILL, “Large Pool LMFBR Design,” EPRI NP-1016, Electric Power Research Institute (1979).
  • C. P. TZANOS and N. A. HANAN, “A Comparison of Selected Risk Contributions of a LMFBR and a LWR: Phase A,” EPRI NP-2784, Electric Power Research Institute (1982).
  • W. P. BARTHOLD and C. P. TZANOS, “Conceptual Design of a 1000 MW(e) Heterogeneous Oxide LMFBR,” EPRI NP-1616, Electric Power Research Institute (1980).
  • “Clinch River Breeder Reactor Plant Preliminary Safety Analysis Report,” Project Management Corporation (1976).
  • “LMFBR Conceptual Design Study: Reliability/Availability Analysis,” CDS 300-3, Rockwell International Atomics International Division, Energy Systems Group (1981).
  • R. B. TUPPER and M. H. COOPER, “Inherently Safe Core Design Program Annual Summary Report, October 1, 1977 through September 30, 1978,” WARD-IS-3045-4, Westinghouse Electric Corporation (1980).
  • R. B. TUPPER, M. H. COOPER, and C. E. SWENSON, “Nuclear Safety and Reliability Engineering, Self-Actuated Shutdown System Development, Annual Progress Report for the Period Ending September 30, 1979,” WARD-SR-94000-4, Westinghouse Electric Corporation (1980).
  • R. B. TUPPER et al., “Nuclear Safety and Reliability Engineering, Self-Actuated Shutdown System Development, Annual Progress Report for the Period Ending September 30, 1980,” WARD-SR-94000-25, Westinghouse Electric Corporation (1981).
  • M. H. COOPER, Westinghouse Advanced Reactors Division, Personal Communication (1981).
  • R. C. ERDMANN et al., “Probabilistic Safety Analysis V,” EPRI NP-1275, Electric Power Research Institute (1979).
  • “Reliability Assessment of CRBRP Reactor Shutdown System,” WARD-D-0118, Westinghouse Electric Corporation (1975).
  • C. F. MILLER et al., “Data Summaries of Licensee Event Reports of Selected Instrumentation and Control Components at U.S. Commercial Nuclear Power Plants,” NUREG/CR-1740, U.S. Nuclear Regulatory Commission (1981).
  • W. H. HUBBLE and C. F. MILLER, “Data Summaries of Licensee Event Reports of Control Rods and Drive Mechanisms at U.S. Commercial Nuclear Power Plants,” NUREG/CR-1331, U.S. Nuclear Regulatory Commission (1980).
  • Standard Nuclear Steam System, Vol. 2, B-SAR-205, Babcock & Wilcox.
  • G. APOSTOLAKIS and T. L. CHU, “The Unavailability of Systems Under Periodic Test and Maintenance,” Nucl. Technol., 50, 5 (1980).
  • R. B. TUPPER and M. H. COOPER, “Inherently Safe Core Design Program Annual Summary Report, October 1, 1977 through September 30, 1978,” WARD-IS-3045-4, Westinghouse Electric Corporation (1980).
  • R. B. TUPPER, M. H. COOPER, and C. E. SWENSON, “Nuclear Safety and Reliability Engineering, Self-Actuated Shutdown System Development, Annual Progress Report for the Period Ending September 30, 1979,” WARD-SR-94000-4, Westinghouse Electric Corporation (1980).
  • R. B. TUPPER et al., “Nuclear Safety and Reliability Engineering, Self-Actuated Shutdown System Development, Annual Progress Report for the Period Ending September 30, 1980,” WARD-SR-94000-25, Westinghouse Electric Corporation (1981).
  • M. H. COOPER, Westinghouse Advanced Reactors Division, Personal Communication (1981).
  • H. W. LEWIS et al., “Risk Assessment Review Group Report to the U.S. Nuclear Regulatory Commission,” NUREG/CR-0400, U.S. Nuclear Regulatory Commission (1978).
  • P. K. SAMANTA and S. P. MITRA, “Modeling of Multiple Sequential Failures During Testing, Maintenance, and Calibration,” NUREG/CR-2211, BNL-NUREG-51411, U.S. Nuclear Regulatory Commission (1981).
  • G. S. LELLOUCHE, “Anticipated Transients Without Scram,” Nucl. Safety, 21, 469 (1980).
  • “Anticipated Transients Without Scram for Light-Water Reactors,” NUREG-0460, U.S. Nuclear Regulatory Commission (1978).
  • C. L. ATWOOD, “Common Cause and Individual Fault Rates for Licensee Event Reports of Instrumentation and Control Assemblies at U.S. Commercial Nuclear Power Plants,” EGG-EA-5623 (Draft), EG&G Idaho, Inc. (1981).
  • “Scram Signal Failures at Salem-1 Spur ATWS Concern,” Nuclear News, 26, 5, 35 (Apr. 1983).
  • A. D. SWAIN and H. E. GUTTMANN, “Handbook of Human Reliability Analysis with Emphasis on Nuclear Power Plant Applications,” NUREG/CR-1278, U.S. Nuclear Regulatory Commission (1980).
  • F. L. LEVERENZ and H. KIRCH, “User’s Guide for the WAM-BAM Computer Code,” EPRI 217-2-5, Electric Power Research Institute (1976).
  • D. BROADLEY and R. N. McSWEENEY, “Sizing of Decay Heat Rejection Loops for LMFBRs,” Proc. Int. Conf. Optimization of Sodium-Cooled Fast Reactors, November 28-December 1, 1977, British Nuclear Energy Society, London, p. 83 (1977).
  • W. H. HUBBLE and C. F. MILLER, “Data Summaries of Licensee Event Reports of Valves at U.S. Commercial Nuclear Power Plants,” NUREG/CR-1363, U.S. Nuclear Regulatory Commission (1980).
  • W. H. SULLIVAN and J. P. POLOSKI, “Data Summaries of Licensee Event Reports of Pumps at U.S. Commercial Nuclear Power Plants,” NUREG/CR-1205, U.S. Nuclear Regulatory Commission (1980).
  • J. P. POLOSKI and W. H. SULLIVAN, “Data Summaries of Licensee Event Reports of Diesel Generators at U.S. Commercial Nuclear Power Plants,” NUREG/CR-1362, U.S. Nuclear Regulatory Commission (1980).
  • “IEEE Nuclear Reliability Data Manual,” IEEE Std. 500-1977, Institute of Electrical and Electronics Engineers, Wiley-Interscience, New York (1977).
  • “Zion Probabilistic Safety Study,” Commonwealth Edison Company (1981).
  • CREDO Staff, Oak Ridge National Laboratory, Personal Communication (1981).
  • T. F. BOTT, P. M. HAAS, and J. J. MANNING, “Sodium Component Reliability Data Collection at CREDO,” Trans. Am. Nucl. Soc., 32, 480 (1979).
  • P. F. NOVACEK, “Sodium Piping Survey to July 1977,” AE-DOE-13225, Atomics International (1978).
  • D. ILBERG, “An Analysis of the Reliability of the Shutdown Heat Removal System for the CRBR,” UCLA-ENG-7682, University of California, Los Angeles, School of Engineering (1976).
  • J. DUFRESNE, “Probabilistic Application of Fracture Mechanics,” Advances in Fracture Research, Proc. 5th Int. Conf. Fracture, Cannes, France (1981).
  • G. E. APOSTOLAKIS, “Mathematical Methods of Probabilistic Safety Analysis,” University of California, Los Angeles, School of Engineering and Applied Science (1974).
  • R. C. ERDMANN, F. L. LEVERENZ, and H. KIRCH, “WAMCUT, A Computer Code for Fault Tree Evaluation,” EPRI NP-803, Electric Power Research Institute (1978).
  • C. L. ATWOOD, “Common Cause and Individual Failure and Fault Rates for Licensee Event Reports of Pumps at U.S. Commercial Nuclear Power Plants,” EGG-EA-5289 (Draft), EG&G Idaho, Inc. (1981).
  • J. A. STEVERSON and C. L. ATWOOD, “Common Cause and Individual Failure and Fault Rates for Licensee Event Reports of Diesel Generators at U.S. Commercial Nuclear Power Plants,” EGG-EA-5359 (Draft), EG&G Idaho, Inc. (1981).
  • J. A. STEVERSON and C. L. ATWOOD, “Common Cause and Individual Failure and Fault Rates for Licensee Event Reports of Valves at U.S. Commercial Nuclear Power Plants,” EGG-EA-5485 (Draft), EG&G Idaho, Inc. (1981).
  • C. P. TZANOS et al., “Design-Related Inherent Safety Characteristics in Large LMFBR Power Plants,” Proc. Int. Conf. Fast Reactor Safety and Related Physics, Chicago, Illinois, CONF-761001, Vol. 2, p. 431 (1976).
  • C. P. TZANOS, W. P. BARTHOLD, and J. B. van ERP, “Unprotected Loss-of-Flow Transients in Large LMFBRs,” Proc. Int. Conf. Fast Reactor Safety and Related Physics, Chicago, Illinois, CONF-761001, Vol. 3, p. 1081 (1976).
  • F. J. HALFEN and J. E. MOTT, “Transient Design for Safety in a Pool-Type LMFBR,” Proc. Int. Mtg. Fast Reactor Safety Technology, Seattle, Washington, Vol. Ill, p. 1263 (1979).
  • S. M. DAVIES, “Pool-Type LMFBR Plant, 1000 MWe Phase A Design,” Vol. 4, EPRI NP-646, Electric Power Research Institute (1978).
  • W. H. PERRY, Experimental Breeder Reactor II, Private Communication (1983).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.