References
- M. COLIN, M. COQUERELLE, I. L. RAY, C. T. WALKER, C. RONCHI and H. BLANK, “The Sodium-Bonding Pin Concept for Advanced Fuels; Part I: Swelling of Carbide Fuel up to 12% Burnup,” Nucl. Technol., 63, 442 (1983).
- C. RONCHI and J. van de LAAR, “Introduction to the Use of the EUGES-ARIES Code System,” EUR 9548en, Commission of the European Communities (1984).
- C. RONCHI, “Physical Processes and Mechanisms Related to Fission Gas Swelling in MX-Type Nuclear Fuels,” J. Nucl. Mater., 84, 55 (1979).
- C. RONCHI, “Extrapolated Equation of State for Rare Gases at High Temperatures and Densities,” J. Nucl. Mater., 96, 314 (1981).
- C. RONCHI, “Caesium Contribution to Nuclear Fuel Swelling,” Progress Report TUSR 31, p. 23, Commission of the European Communities (1981).
- Hj. MATZKE and M. BRADBURY, “Self-Diffusion in MX-Type Nuclear Fuels Out-of-Pile and In-Pile,” EUR-5906, Commission of the European Communities (1978).
- M. G. NICHOLAS and E. N. HODKIN, “The Grain Boundary Grooving of UC,” J. Nucl. Mater., 38, 234 (1971).
- R. L. RITZMAN, A. J. MARKWORTH, W. OLDFIELD and W. CHUBB, “Interpretation of Fission Gas Behavior in Refractory Fuels,” Nucl. Appl. Technol., 9, 167 (1970).
- H. BLANK, F. CALIGARA and I. L. RAY, “Steady-State Fission Gas Kinetics in Nuclear Fuels at Lower Temperatures,” Proc. Specialists’ Mtg. Fuel Element Performance Computer Modelling, Blackpool, March 16-21, 1980, Summary Report IAEA IWGFPT/7, p. 76, International Atomic Energy Agency (1980).
- Hj. MATZKE, “Radiation-Enhanced Kinetics in the Fuel Lattice,” Fission Gas Behaviour in Nuclear Fuels, p. 289, Harwood Academic Publishers, London (1979).
- F. A. NICHOLS, “Kinetics of Diffusional Motion of Pores in Solids,” J. Nucl. Mater., 30, 143 (1969).
- C. SARI, “Porosity in MX-Type Fuels and Its Stability,” EUR-5812, Commission of the European Communities (1979).
- K. RICHTER et al., “Fabrication and Characterization of MX-Type Fuels and Fuel Pins,” EUR-6154, Commission of the European Communities (1978).
- Hj. MATZKE, V. MEYRITZ and J. L. ROUTBORT, “Fracture Surface Energy of MC and MCO,” J. Am. Ceram. Soc., 66, 183 (1983).
- M. S. SELTZER, J. S. PERRIN, A. H. CLAUER and B. A. WILKOX, “A Review of Creep Behavior of Ceramic Fuels,” React. Techol., 14, 99 (1971).
- N. M. KILLEY, E. KING and H. J. HEDGER, “Creep of UC and (UPu)C in Compression,” J. Br. Nucl. Energy Soc., 10, 65 (1971).
- W. DIENST, “Irradiation Induced Creep in Ceramic Nuclear Fuels,” J. Nucl. Mater., 65, 1 (1977).
- E. R. GILBERT and G. F. BATES, “Dependence of Irradiation Creep on Temperature and Atom Displacements in 20% Cold-Worked Type 316 Stainless Steel,” J. Nucl. Mater., 65, 204 (1977).
- A. BOLTAX, J. P. FORSTER, R. A. WIENER and A. BIANCHERIA, “Void Swelling and Irradiation Creep Relationships,” J. Nucl. Mater., 65, 174 (1977).
- M. COLIN, J. L. FAUGERE and J. ROUAULT, “Experimental Study of Fission Gas Release in Na-Bonded Carbide Fuel Pins,” Fission Gas Behaviour in Nuclear Fuels, p. 151, Harwood Academic Publishers, London (1978).
- J. F. KERRISK, N. S. de MUTH, R. L. PETTY, T. W. LATIMER, J. A. VITTI and L. J. JONES, “Design and Performance of Na-Bonded Uranium-Plutonium Carbide Fuel Elements,” Proc. Int. Conf. Fast Breeder Reactor Fuel Performance, Monterey, California, March 5-8, 1979, p. 804, American Nuclear Society (1979).
- C. RONCHI, M. COQUERELLE, H. BLANK and J. ROUAULT, “The Sodium-Bonding Pin Concept for Advanced Fuels; Part II: Analysis of the Cladding Carburization,” Nucl. Technol., 67, 73 (1984).
- R. L. PETTY and T. W. LATIMER, “The Behavior of Helium-Bonded Carbide Fuel Elements Irradiated to Goal Burnup,” Trans. Am. Nucl. Soc., 39, 413 (1981).