Heat Transfer Modeling in Low Flows and Application to Reflood Heat Transfer

References

• R. C. GOTTULA, K. G. CONDIE, R. K. SUNDARAM, S. NETI, J. C. CHEN, and R. A. NELSON, “Forced Convective Nonequilibrium, Post-CHF Heat Transfer Experiment Data and Correlation Comparison Report,” NUREG/CR-3193, EGG-2245, EG&G Idaho (Mar. 1985).
   Google Scholar
• W. L. KIRCHNER, “Reflood Heat Transfer in a Light Water Reactor,” PhD Thesis, Massachusetts Institute of Technology (Aug. 1976).
   Google Scholar
• J. N. SPORE, “TRACK-BD1: An Advanced Best Estimate Computer Program for Boiling Water Reactor Loss-of-Coolant Accident Analysis,” NUREG/CR-2178, Vol. 1, U.S. Nuclear Regulatory Commission (Oct. 1981).
   Google Scholar
• D. R. LILES and J. H. MAHAFFY, “TRAC-PF1, An Advanced Best Estimate Computer Program for Pressurized Water Analysis,” Los Alamos National Laboratory (1981).
   Google Scholar
• K. R. KATSMA, S. R. FISHER, R. A. NELSON, D. J. BARNUM, G. W. JOHNSEN, R. C. YOUNG, R. L. CURTIS, R. J. WAGNER, R. A. WELLS, G. L. SINGER, J. E. TOLLI, C. J. BURGESS, C. NOBLE, and W. H. RETTIG, “RELAP4/MOD5: A Computer Program for Transient Thermal-Hydraulic Analysis of Nuclear Reactors and Related Systems,” User’s Manual, ANCR-NUREG-1335, U.S. Nuclear Regulatory Commission (Sep. 1976).
   Google Scholar
• M. J. BURWELL, D. ENIX, G. LERCHL, and F. STEINHOFF, “DRUFAN-01/MOD2,” Report No. 70500, Gesellschaft für Reaktorsicherheit (May 1981).
   Google Scholar
• J. G. M. ANDERSEN, P. S. ANDERSEN, P. ASTRUP, N. BECH, J. ERIKSSON, R. HOLT, H. V. LARSEN, and J. MIETTINEN, “NORCOOL I: A Model for Analysis of a BWR Under LOCA Conditions, A Revised Report,” NORHAV-D-47 (Aug. 1977).
   Google Scholar
• W. J. GREEN and W. S. V. JACOBS, “THETRAN—A Two-Dimensional Heat Transport Code for Analysis of Power Transients,” AAEC/E507, Australian Atomic Energy Commission (Apr. 1981).
   Google Scholar
• R. S. DOUGALL, C. A. HALL, and T. A. PORSCHING, “DUVAL: A Computer Program for the Numerical Solution of Two-Dimensional, Two-Phase Flow Problems,” EPRI-NP-2099, Electric Power Research Institute (Apr. 1982).
   Google Scholar
• A. K. SINGHAL, L. W. KEETON, and D. B. SPALDING, “ATHOS—A Computer Program for Thermal-Hydraulic Analysis of Steam Generators,” EPRI-NP-2698-CCM, Electric Power Research Institute (Oct. 1982).
   Google Scholar
• B. CHEXAL and B. LELLOUCHE, “A Full-Range Drift-Flux Correlation for Vertical Flows,” EPRI-NP-3989-SR, Electric Power Research Institute (Sep. 1986).
   Google Scholar
• N. ZUBER and J. FINDLAY, “Average Volumetric Concentration in Two-Phase Flow Systems,” Trans. ASME J. Heat Transfer, 87, 453 (1965).
   Web of Science ®Google Scholar
• G. B. WALLIS, One Dimensional Two-Phase Flow, McGraw-Hill Book Company, New York (1969).
   Google Scholar
• M. S. EL-GENK, J. H. STANLEY, and S.-H. KIM, “Experimental Studies of Critical Heat Flux for Low Flow of Water in Vertical Annuli at Near Atmospheric Pressure,” Int. J. Heat Mass Transfer, 31, 11, 2291 (1988).
   Google Scholar
• Y. Y. HSU and W. D. BECKNER, “A Correlation for the Onset of Transient CHF,” unpublished report, as cited by L. S. TONG and G. L. BENNETT, Nucl. Safety, 18, 1 (1977).
   Google Scholar
• B. C. SLIFER, “Loss-of-Coolant Accident and Emergency Core Cooling Models for General Electric Boiling Water Reactors,” NEDO-10329, General Electric Company (1971).
   Google Scholar
• P. GRIFFITH, J. F. PEARSON, and R. J. LEPKOWSKI, “Critical Heat Flux During a Loss-of-Coolant Accident,” Nucl. Safety, 18, 298 (1977).
   Google Scholar
• Y. AKITA and Y. MAKIHARA, “Development of New Thermal Design Method for PWR and Up-Rating of Mitsubishi 17 × 17, 3-Loop Plant,” Proc. 2nd Int. Mtg. Nuclear Power Plant Thermal Hydraulics and Operation, Tokyo, Japan, April 15–17, 1986.
   Google Scholar
• J. C. M. LEUNG, K. A. GALLIVAN, R. E. HENRY, and S. G. BANKOFF, “Critical Heat Flux Predictions During Blowdown Transients,” Int. J. Multiphase Flow, 7, 6, 677 (1981).
   Web of Science ®Google Scholar
• Y. KATTO, “Critical Heat Flux,” Advances in Heat Transfer, Vol. 17, Academic Press, New York (1985).
   Google Scholar
• J. J. CARBAJO, “A Study on the Rewetting Temperature,” Nucl. Eng. Des., 84, 21 (1985).
   Web of Science ®Google Scholar
• J. C. CHEN, “A Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow,” paper 63-HT-34, American Society of Mechanical Engineers (1963).
   Google Scholar
• K. STEPHAN and H. AURACHER, “Correlations for Nucleate Boiling Heat Transfer in Forced Convection,” Int. J. Heat Mass Transfer (Jan. 1981).
   Google Scholar
• H. ABEL-LARSEN, A. OLSEN, J. MIETTINEN, T. SIIKONEN, J. RASMUSSEN, A. SJOBERG, and K. BECKER, “Heat Transfer Correlations in Nuclear Reactor Safety Calculations,” SAK-5, RISØM-2504, Danish Atomic Energy Commission (June 1985).
   Google Scholar
• S. S. KUTATELADJE, “A Hydrodynamic Theory of Changes in the Boiling Process Under Free Convection Conditions,” Izv. Akad. Nauk. SSSR, Otd. Tekh. Nauk., 4, 529 (1951).
   Google Scholar
• N. ZUBER, “Nucleate Boiling. The Region of Isolated Bubbles and the Similarity with Natural Convection,” Int. J. Heat Mass Transfer, 6, 53 (1963).
   Google Scholar
• J. H. LIENHARD, A Heat Transfer Textbook, Prentice-Hall, Englewood Cliffs, New Jersey (1981).
   Google Scholar
• W. H. JENS and P. A. LOTTES, “Analyses of Heat Transfer Burnout, Pressure Drop and Density Data for High Pressure Water,” ANL-4627, Argonne National Laboratory (1951).
   Google Scholar
• R. J. WEATHERHEAD, “Heat Transfer Flow Instability and Critical Heat Flux for Water in a Small Tube at 200 psia,” ANL-6715, Argonne National Laboratory (1963).
   Google Scholar
• J. R. S. THOM, W. A. WALKER, T. A. FALLON, and G. F. S. REISING, “Boiling in Subcooled Water in Flow Up Heated Tubes or Annuli,” Proc. Symp. Boiling Heat Transfer in Steam Generation Units and Heat Exchangers, Manchester, U.K., September 15–16, 1965, Institute of Mechanical Engineers.
   Google Scholar
• G. L. SHIRES, A. R. PICKERING, and P. T. BLACKER, “Film Cooling of Vertical Fuel Rods,” AEEW-R343, U.K. Atomic Energy Research Establishment, Winfrith (1964).
   Google Scholar
• A. W. BENNET, G. F. HEWITT, H. A. KEARSEY, and R. K. F. KEES, “The Wetting of Hot Surfaces by Water in a Steam Environment at High Pressure,” AERE-R5146, U.K. Atomic Energy Research Establishment (1966).
   Google Scholar
• D. F. ELLIOT and P. W. ROSE, “The Quenching of a Heated Surface by a Film of Water in a Steam Environment at Pressures up to 53 bar,” AEEW-M976, U.K. Atomic Energy Research Establishment, Winfrith (1970).
   Google Scholar
• D. F. ELLIOT and P. W. ROSE, “The Quenching of a Heated Surface by a Film of Water in a Steam Environment at Pressures up to 53 bar,” AEEW-M10127, U.K. Atomic Energy Research Establishment, Winfrith (1971).
   Google Scholar
• P. A. HOWARD, “An Experimental and Analytical Study of the Sputtering Phenomena,” ANL-7641, Argonne National Laboratory (1976).
   Google Scholar
• S. C. CHENG, P. W. K. LAU, and K. T. POON, “Measurements of True Quench Temperature of Subcooled Water Under Forced Convective Conditions,” Int. J. Heat Mass Transfer, 28, 1, 235 (1985).
   Google Scholar
• S. T. WANG and R. A. SEBAN, “Heat Transfer During the Quench Process That Occurs in the Reflood of a Single Vertical Tube,” Int. J. Heat Mass Transfer, 31, 6, 1189 (1988).
   Google Scholar
• E. K. KALININ, S. A. YARKO, I. I. BERLIN, Y. S. KOCHELAEV, and V. V. KOSTYUK, “Investigation of the Crisis of Film Boiling in Channels, Two-Phase Flow and Heat Transfer in Rod Bundles,” Proc. ASME Annual Mtg. Two-Phase Flow and Heat Transfer in Rod Bundles, Los Angeles, California, November 18, 1969, p. 89.
   Google Scholar
• K. J. BURMEISTER and F. F. SIMON, “Leidenfrost Temperature—Its Correlation for Liquid Metals, Cryogens, Hydrocarbons and Water,” Trans. ASME J. Heat Transfer, 94-C, 166 (1972).
   Google Scholar
• J. H. LIENHARD, “Correlation for the Limiting Liquid Superheat,” Chem. Eng. Sci., 31, 9, 847 (1976).
   Web of Science ®Google Scholar
• T. A. BJONARD and P. GRIFFITH, “PWR Blowdown Heat Transfer,” Proc. Symp. Thermal and Hydraulic Aspects of Nuclear Reactor Safety, Vol. 1, p. 17, O. C. JONES, Jr. and S. G. BANKOFF, Eds., American Society of Mechanical Engineers (1977).
   Google Scholar
• M. De SALVE and B. PANELLA, “Analytical Model for Bottom Reflooding Thermal-Hydraulics in Circular Ducts and Comparison with Experimental Results,” Heat Transfer in Nuclear Reactor Safety, p. 747, S. G. BANKOFF and N. H. AFGAN, Eds., Hemisphere Publishing Corporation, New York (1982).
   Google Scholar
• A. K. KIM and Y. LEE, “A Correlation of Rewetting Temperature,” Lett. Heat Mass Transfer, 6, 117 (1979).
   Google Scholar
• A. D. SIEGEL, “Rewetting Temperature During Top and Bottom Reflood,” MS Thesis, University of Illinois, Urbana-Champaign (1979).
   Google Scholar
• A. D. SIEGEL and J. J. CARBAJO, “A New Empirical Correlation for the Rewetting Temperature,” Trans. Am. Nucl. Soc., 35, 327 (1980).
   Google Scholar
• D. C. GROENEVELD and J. C. STEWART, “The Minimum Film Boiling Temperature for Water During Film Boiling Collapse,” Proc. 2d Int. Topl. Mtg. Nuclear Reactor Thermal-Hydraulics, Santa Barbara, California, January 11–14, 1983, p. 393, American Society of Mechanical Engineers (1983).
   Google Scholar
• A. SAKURAI, M. SHIOTSU, and K. HATA, “Steady and Unsteady Film Boiling Heat Transfer at Subatmospheric and Elevated Pressure,” Heat Transfer in Nuclear Reactor Safety, p. 301, S. G. BANKOFF and N. H. AFGAN, Eds., Hemisphere Publishing Corporation, New York (1982).
   Google Scholar
• A. SAKURAI, M. SHIOTSU, and K. HATA, “Effect of System Pressure on Film-Boiling Heat Transfer, Minimum Heat Flux, and Minimum Temperature,” Nucl. Sci. Eng., 88, 321 (1984).
   Web of Science ®Google Scholar
• Y. KIKUCHI, T. HORI, and I. MICHIYOSHI, “Minimum Film Boiling Temperature for Cooldown of Insulated Metals in Saturated Liquid,” Int. J. Heat Mass Transfer, 28, 6, 1105 (1985).
   Google Scholar
• P. J. BERENSON, “Film Boiling Heat Transfer from a Horizontal Surface,” Trans. ASME J. Heat Transfer, 83, 351 (1961).
   Google Scholar
• R. E. HENRY, “A Correlation for the Minimum Film Boiling Temperature,” AIChE Symp. Ser., 70, 138, 81 (1974).
   Google Scholar
• Y. MURAO, “Correlation of Quench Phenomena for Bottom Flooding During Loss-of-Coolant Accidents,” J. Nucl. Sci. Technol., 15, 12, 875 (1978).
   Web of Science ®Google Scholar
• F. F. SIMON and R. J. SIMONEAU, “Transition from Film to Nucleate Boiling in Vertical Forced Flow,” Paper 69-HT-29, American Society of Mechanical Engineers (1969).
   Google Scholar
• S. C. YAO and R. E. HENRY, “An Investigation of the Minimum Film Boiling Temperature on Horizontal Surfaces,” Trans. ASME J. Heat Transfer, 100, 260 (1978).
   Web of Science ®Google Scholar
• G. S. EMMERSON, “The Effect of Pressure and Surface Material on the Leidenfrost Point of Discrete Drops of Water,” Int. J. Heat Mass Transfer, 18, 381 (1975).
   Google Scholar
• S. NISHIO and M. HIRATA, “Direct Contact Phenomenon Between a Liquid Droplet and High Temperature Solid Surface,” Proc. 6th Int. Heat Transfer Conf., Toronto, Canada, August 7–11, 1978, p. 245, American Society of Mechanical Engineers (1978).
   Google Scholar
• H. S. RAGHEB and S. C. CHENG, “Observations in Transition Boiling of Subcooled Water Under Forced Convective Conditions,” Int. J. Heat Mass Transfer, 24, 7, 1127 (1981).
   Web of Science ®Google Scholar
• M. R. ADLER, “The Influence of Water Purity and Subcooling on the Minimum Film Boiling Temperature,” MS Thesis, University of Illinois, Urbana-Champaign (1979).
   Google Scholar
• L. HAAR, J. S. GALLAGHER, and G. S. KELL, NBS/NRC Steam Tables: Thermodynamic and Transport Properties and Computer Programs for Vapor and Liquid States of Water in SI Units, Hemisphere Publishing Corporation, New York (1984).
   Google Scholar