Evaluation of the fatigue resistance of welded structures for naval use

References

• Niemi E: ‘Recommendations concerning stress determination for fatigue analysis of welded components’. Abington Publishing, Cambridge, 1995 .
   Google Scholar
• Gimperlein D: ‘Fatigue strength assessment of welded structures’ IfS, report 544, Institut fur Schiftban, Hamburg, 1994 .
   Google Scholar
• Haibach E: ‘Fatigue strength – Procedures and data for analysis of structural components’ VDI-Verlag. Dusseldorf, 1989 .
   Google Scholar
• Fricke W, Petershangen H and Paetzold H: ‘Fatigue strength of ship structures – Part. I: basic principles’: Germanischer Lloyd Technology Journal , Hamburg, August, 1997 .
   Google Scholar
• Longobardi V, Natale U and Tizzano G: ‘An evaluation procedure of hot spot tension in welded plates’, Rivista Italiana della Saldatura , ( 2 ) 2001 , 155 –167.
   Google Scholar
• Partanen T and Nieim E: Fatigue analysis and resistance of welded components based on hot-spot stress approach. Proceedings of II Inter. Ship Building Conference, St Petersburg, 1998 .
   Google Scholar
• British Standard 7608: ‘Code of practice for fatigue design and assessment of steel structures’, 1993 .
   Google Scholar
• Norsok Standard 004: ‘Design of steel structures’. Annex C , Appendix 1, 1998 .
   Google Scholar
• Germanischer Lloyd: ‘Guidelines for fatigue strength of ship structures’, Hamburg, 1998 .
   Google Scholar
• Eurocode3: ‘Design of steel structures’, ECS, Bruxelles, 1998 .
   Google Scholar
• Paetzold H and Petershangen H: ‘Investigations on fatigue strength of welded ship structures’, Schiff and Hafen , 36 ( 11 ) 1984 .
   Google Scholar
• Schutz T and Pook L P: ‘WASH, a standardised stress: time history for offshore structures’, Proceedings of 3rd Int. Conf. on steel in marine structures, Elsevier, Amsterdam, 1987 .
   Google Scholar
• Dowling N.E: ‘Fatigue predictions for complicated stress strain histories’, Journal of Materials ( 7 ) 1972 .
   Google Scholar
• Fricte W, Scharrer M and Von Selle H: ‘Integrate fatigue analysis of tanker structures’, Proceedings of Symposium on practical design of ship and mobile units. Seoul, 1995 .
   Google Scholar
• Amzallag C: ‘Standardization of the rainflow counting method for fatigue analysis’, International Journal of Fatigue , ( 5 ) 1994 .
   Google Scholar
• Chlormann U H and Seeger T: ‘Rainflow, a counting method for fatigue analysis on the basis of material mechanics’, Stahlbau, ( 3 ) 1986 .
   Google Scholar
• Soding H: ‘Calculation of long term extreme loads and fatigue loads in marine structures’, Int. Symp. on the Dynamics of marine vehicles and structures in waves, London, 1974 .
   Google Scholar
• Fricke W and Petershangen H: ‘Fatigue strength in ship structures’, Germanischer Lloyd Technology Journal , August, 1998 .
   Google Scholar
• Rice R C et al : ‘Fatigue design handbook’, Society of Automotive Engineers, Warrendale (USA), 1998 .
   Google Scholar
• ASTM Designation E 1049: ‘Standard practices for cycle counting in fatigue analysis’, New York, 1985 .
   Google Scholar
• Frendahl M and Rychlik L: ‘Rainflow analysis: Markov method’, International Journal of Fatigue , ( 5 ) 1993 .
   Google Scholar
• Rychlik L: ‘A new definition of the rainflow cycle counting method’, International Journal of Fatigue , ( 9 ), 1997 .
   Google Scholar
• Schutz W and Inner H: ‘Damage accumulation hypothesis for life prediction under cyclic stress’, Z. Werkst Tech , ( 4 ), 1973 .
   Google Scholar
• Paetzold H: ‘Damage parameter: life curve for mild and higher tensile steel’, IfS report 507, Hamburg, 1990 .
   Google Scholar