21
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Special features of the process of filling the gap (surfacing) in automatic orbital welding of non-rotating joints in pipes

Pages 49-56 | Published online: 08 Jul 2010

References

  • Poloskov C K et al : ‘Analysis of factors determining the formation of the weld pool in orbital welding of non-rotating joints (Review)’. Svar Proiz 2003 ( 2 ) 11 –19.
  • Belousov A N and Poloskov S I: ‘A complex system for ensuring the reliability of welding equipment for atomic power engineering’. In: ‘Tr. NIKIMT, Welding in atomic power engineering and energetics’. Publ IzDAT, Vol.2, Moscow ( 2002 ) 281 –309.
  • Vinokurov V A: ‘Service and technological requirements on welded joints in regards to integrity’. Svar. Proiz 1987 ( 3 ) 27 –30.
  • Ishchenko Yu S and Bukarov V A: ‘Evaluating non-uniformity of the height of cirumferential deposits produced on the surface on non-rotating pipes’. Svar. Proiz 1980 ( 1 ) 20 –22.
  • Bel'chuk G A and Titov N Ya: ‘Effect of the automatic welding conditions in a narrow gap on the shape of the weld’. Avt Svarka 1970 ( 12 ) 48 –51.
  • Chernyshov G G and Akupov A I: ‘Regulating the dimensions of shape of the weld pool and welding CO 2 welding’. Svar Proiz 1970 ( 10 ) 35 –37.
  • Shtrikman M M and Grinin V V: ‘Special features of heating and penetration of the edges in automatic welding in a slit transverse beading of the arc’. Svar. Proiz 1978 ( 11 ) 7 –10.
  • Roshchin V V and Gusakov G N: ‘Gas electric welding of non-rotating joints in pipes’. Svar. Proiz ( 6 ) 21 –22.
  • V.A. Timchenko et al : ‘Effect of the trajectory of electrode weaving on the formation of the weld in robotised arc welding in carbon dioxide’. Avt Svarka 1989 ( 2 ) 73 .
  • V V Roshchin G N et al : ‘Automatic welding of non-rotated joints in pipes with remote control’. Tr. NIKIMT, Svarochnoe Proizvodstvo 1971 ( 1 ) 44 –53.
  • Serenko A N et al : ‘Special features of weld formation in spot-arc welding' of thick plate metal (with programming the conditions)’. Svar Proiz 1984 ( 2 ) 19 –22.
  • Popkov A M: ‘Calculating the parameters of welding conditions and technological characteristics of the arc discharge in CO 2 and other gases’. Svar Proiz 1989 ( 8 ) 19 –22.
  • Chernyshov G G and Akulov A I: ‘Programming the conditions of automatic welding non-rotating joints in pipes’. Avt Svarka 1970 ( 8 ) 40 –42.
  • Zemlevsky L A and Leskov G I: ‘Penetrating effect of the arc in welding in the gas mixtures when using the gas–dynamic effect’. Avt Svarka 1977 ( 10 ) 26 –29.
  • Potapov N N: ‘Fundamentals of selection of fluxes in the welding of steels’. Publ Mashinostroenie Moscow 1979 .
  • Deev G F: ‘Effect of carbon dioxide on the surface tension of molten metals’. Avt Svarka 1986 ( 6 ) 73 –75.
  • Nikolaenko M R et al : ‘Special features of the effect of the conditions of welding with strip and wire electrodes under the dimensions and properties of the welding joint’. Svar Proiz 1980 ( 11 ) 20 –21.
  • Bukarov V A et al : ‘Effect of technological fundamentals on the process of melting of filler wire in argon-shielded arc welding’. In: ‘Problems of atomic science and technology, Series Welding in nuclear technology’. 1 (10) 1983 30 –33.
  • Bukarov V A et al : ‘Calculating the contours of the cross-section of the welded joints in pulsed arc welding’. Tr. NIKIMT. Svarochnoe Proizvodstvo 1978 5 (2) 94 –97.
  • Bukarov V A and Ishchenko Yu S: ‘Technology of automatic arc welding tubular joints and prospects of improving it’. Tr. NIKIMT. Svarochnoe Proizvodstvo 1985 1 (14) 52 –63.
  • Shefel ' V V: ‘Automatic welding of pipelines in nuclear power stations’. Avt Svarka 1987 ( 2 ) 45 –50.
  • Poloskov S I et al : ‘Special features of control heat and mass transfer in consumable electrode welding with short circuiting of the arc gap’. Svar Proiz 2002 ( 7 ) 6 –13.
  • Poloskov S I et al : ‘Effect of perturbations in the system supplying electrode wire on the quality of the welded joint’. Svar Proiz 2001 ( 8 ) 3 –7.
  • Poloskov S I et al : ‘Special features of controlling the formation of the weld root in orbital welding of non-rotating joints in pipes’. Svar Proiz 2003 ( 4 ) 3 –10.
  • Berezovsky B M and Stikhin A V: ‘Optimising formation of the layer of metal in arc surfacing’. Svar Proiz 1990 ( 6 ) 33 –36.
  • Tsybul'kin G A: ‘Constructing mathematical models in problems of adaptive control of arc welding’. Avt Svarka 1994 ( 1 ) 24 –28.
  • Sudnik V A et al : ‘Numerical solution of a combined problem of temperature in strain fields in the weld pool in arc welding. In: Computer technologies and joining of materials’. Publ Tula State Technical University Tula 1999 97 –109.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.