References
- Tylecote R F: ‘Investigations on pressure welding’. Brit Weld J 1954 2 ( 3 ) 114 –135.
- Albright C E: ‘The fracture toughness of steel–aluminium deformation welds’. Weld J 1981 60 ( 11 ) 207s –214s.
- Mukai S et al : ‘Prototype vacuum rolling welding machine and production of clad materials’. Q J Jpn Weld Soc 1991 9 ( 1 ) 17 –23.
- Mukai S et al : ‘Effect of heat treatment on weld interface properties of aluminium clad steel’. Q J Jpn Weld Soc 1994 12 ( 4 ) 528 –533.
- Kawase et al : Nippon Steel Tech Rep 1981 44 ( 6 ) 96 –109.
- Storchheim S: ‘Hot pressure bonding’. Metal Progress 1957 (July) 96 –103.
- Oyokawa H et al : ‘Effect of oxide film on solid-phase welding of steel to aluminium sheets’. Tetsu to Hagane (J Iron Steel Inst Jpn) 1997 83 ( 10 ) 629 –634.
- Pocalyko A: ‘Fabrication of explosion-welded titanium-clad composites’. Weld J 1987 66 ( 1 ) 24 –29.
- Kikuchi Y et al : ‘Weld interface of friction-and explosion pressure-welded aluminium to steel joints’. J Jpn Inst Light Met 1984 34 ( 3 ) 165 –173.
- Layner and Kurakin A K: Fiz Metall Metalloved 1964 18 ( 1 ) 145 –148.
- Elliot S and Wallach E R: ‘Joining aluminium to steel. Part 1: Diffusion bonding’. Metal Constr 1981 13 ( 3 ) 167 –171.
- Momono T and Enjo T: ‘Diffusion bonding of aluminium to steel’. J Jpn Inst Light Met 1985 35 ( 7 ) 396 –404.
- Kuroda S et al : ‘Structure and properties of A6061 to SUS316 direct welds’. Q J Jpn Weld Soc 1999 17 ( 3 ) 484 –489.
- Yasuyama M et al : ‘Investigation of process for resistance welding of aluminium-clad steel with insert metal’. Q J Jpn Weld Soc 1996 14 ( 2 ) 314 –320.
- Kawai I et al : ‘Friction weldability of aluminium alloy to low-carbon steel’. J Light Met Weld & Constr 1999 37 ( 7 ) 295 –302.
- Onzawa S: ‘Types and principles of solid-phase welding’. Welding Technique 1999 47 ( 9 ) 134 –139.
- Schubert E et al : ‘Laser beam joining of material combinations for automotive applications’. SPIE No. 3097, Proc ‘Laser 97’ 1996 212–221.
- Schubert E et al : ‘New possibilities for joining by high-power diode lasers’. Proc ICALEO’98 Orlando 1998, part 2, G-111- 120.
- Sepold G et al : ‘Laser joining of dissimilar materials’. IIW Doc IIW IV-734-99 1999 Lisbon.
- Kutsuna M and Rathod M: ‘Laser roll bonding of mild steel to aluminium and control of intermetallic compound layer’. Proc 7WS by JWS 875-880, Nov 20–22, 2001 Kobe.
- Kutsuna M et al : ‘Laser roll bonding of mild steel to aluminium and control of intermetallic compound layer’. Proc ICALEO’2002 Scottdale Arizona USA Oct 14–17, 2002, CD- ROM.
- Kutsuna M and Rathod M: ‘Study of joining mechanism of low-carbon steel to aluminium alloy roll pressure welded joints’. Q J Jpn Weld Soc 2003 21 ( 1 ) 101 –108.
- Kutsuna M and Rathod M: ‘Laser roll welding for joining of A5052 aluminium alloy to SPCC steel’. Q J Jpn Weld Soc 2003 21 ( 2 ) 282 –294.
- Kutsuna M and Rathod M: ‘Joining of aluminium alloy 5052 and low-carbon steel by laser roll welding’. Weld J 2004 83 ( 1 ) 16s –26s.
- Arata Y et al : ‘Application of laser for material processing – Heat flow in laser hardening’. IIW Doc IIW IV-241-78 1978 1–18.
- Kutsuna and Nishimura: ‘Laser roll welding of copper and copper alloys to SPCC steel (1st report)’. Proc Nat Conf Jap Weld Soc No. 75 2004 (10) 292–293.
- Kutsuna M and Ichioka R: ‘Study of laser roll welding of pure titanium to low-carbon steel’. Proc Nat Conf Jap Weld Soc No. 75 2004 (9) 192–193.
- Kutsuna M and Ichioka R: ‘Study of laser roll welding of pure titanium to low-carbon steel (2nd report)’. Proc Nat Conf Jap Weld Soc No. 76 2005 (4) 72–73.