Publication Cover
LEUKOS
The Journal of the Illuminating Engineering Society
Volume 9, 2013 - Issue 3
101
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Illuminance Degradation of LED Streetlighting Luminaires in a Hot Environment

, PhD, , PhD & , PhD
Pages 201-216 | Published online: 16 Sep 2013

References

  • Arik M, Becker C, Weaver S, Petroski J. 2004. Thermal management of LEDs: Package to system. Third International Conference on Solid State Lighting. San Diego (CA). Proc of SPIE Vol 5187. 64–75.
  • Arik M, Petroski J, Weaver S. 2001. Thermal challenges in the future generation solid state lighting applications: Light emitting diodes. ASME/IEEE InterPACK 2001 Conference. Kauai (HI). 113–120.
  • Christensen A, Ha M, Graham S. 2007. Thermal management methods for compact high power LED arrays. Seventh International Conference on Solid State Lighting. San Diego (CA). Proc of SPIE Vol. 6669. 66690Z-1-66690Z-19.
  • Gacio D, Alonso JM, Garcia J, Campa L, Crespo M, Rico-Secades M. 2010. High frequency PWM dimming technique for high power factor converters in LED lighting. Twenty-fifth annual IEEE Applied Power Electronics Conference and Exposition (APEC). 743–749.
  • Garg J, Arik M, Weaver S, Saddoughi S. 2004. Micro fluidic jets for thermal management of electronics. ASME Heat Transfer/Fluids Engineering Summer Conference. Charlotte (NC). 647.
  • Hafner N, Stich A. 2010. LED driving technology for long term flexibility: Application note. [Internet] Osram Opto Semiconductors. 6 p.
  • [ANSI/IES] American National Standard Institute and Illuminating Engineering Society. 2005. Roadway Lighting. ANSI/IESNA RP-8-00. New York (NY): Illuminating Engineering Society. 61 p.
  • [IES] Illuminating Engineering Society. 2008. Electrical and photometric measurements of solid-state lighting products. 2008. IES LM-79-08. New York (NY): Illuminating Engineering Society. 16 p.
  • [IES] Illuminating Engineering Society. 2008. Measuring lumen maintenance of LED light sources. 2008. IES LM-80-08. New York (NY): Illuminating Engineering Society. 7 p.
  • [IES] Illuminating Engineering Society. 2012. Characterization of LED light engines and LED lamps for electrical and photometric properties as a function of temperature. 2012. IES LM-82-12. New York (NY): Illuminating Engineering Society. 6 p.
  • Jorge G, Marco A, Dalla-Costa, Jesus C, Jose MA, Manuel RS. 2009. Dimming of high-brightness LEDs by means of luminous flux thermal estimation. IEEE T Power Electr. 24 (4): 1107–1114.
  • Kim L, Choi JH, Jang SH, Shin MW. 2007. Thermal analysis of LED array system with heat pipe. Thermochim Acta. 455 (1–2)1:21–25.
  • Long X, Liao R, Zhou R. 2009. Development of street lighting. System-based novel high-brightness LED modules. IET Optoelectron. 3 (1): 40–46.
  • Loo KH, Lun Wai-Keung Tan Lai Siew-Chong, Tse YM C.K. 2009. On the driving techniques for high-brightness LEDs. IEEE Energy Conversion Congress and Exposition. 2059–2064.
  • Narendran N, Gu Y, Freyssinier JP, Yu H, Deng L. 2004. Solid-state lighting: Failure analysis of white LEDs. Journal Cryst Growth. 268 (3–4): 449–456.
  • Narendran N, Gu Y, Hosseinzadeh R. 2004. Estimating junction temperature of high-flux white LEDs. The International Society for Optical Engineering. San Jose (CA). Proc of SPIE Vol 5366: 158–160.
  • Narendran N, Gu Y. 2005. Life of LED-based white light sources. Journal Disp Technol. 1 (1): 167–170.
  • Petroski J. 2004. Spacing of high-brightness LEDs on metal substrate PCBs for proper thermal performance in thermo-mechanical phenomena in electronic systems. Thermomechanical Phenomena in Electronic Systems: Proc of the Intersociety Conference. Las Vegas (NV). Vol. 12: 507–514.
  • Saraiji R, Harb A, Hamdan M. 2011. Performance of LED streetlights in hot environment. WIT transactions on the build Environment. 121: 147–158.
  • Yang Y, Song Z, Gao Y. 2010. Design of high-power white LED drive chip with fully integrated PWM dimming function. 2010 Symposium on Photonics and Optoelectronic. DOI: 10.1109/SOPO.2010.5504059.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.