References
- EN 1990. Eurocode 0: Basis of Structural Design. European Standard, CEN, 2002.
- EN 13791. Assessment of In-Situ Compressive Strength in Structures and Precast Concrete Components. European Standard, CEN, 2007.
- Rackwitz R. Über die Wirkung von Abnahmekontrollen auf das Verteilungsgesetz von normalen Produktionsprozessen bei bekannter Standardabweichung. Materialprüfung 1979; 21(4): 122–124.
- Rackwitz R. Predictive distribution of strength under control. Mater. Struct. 1983; 16(94): 259–267.
- Caspeele R. Probabilistic Evaluation of Conformity Control and the Use of Bayesian Updating Techniques in the Framework of Safety Analyses of Concrete Structures. PhD Thesis, Ghent University, Ghent, Belgium, 2010.
- Caspeele R, Taerwe L. Influence of prior information on the assessment of concrete strength from a limited number of test samples. Proceedings of IABSE-fib Conference 2010 ‘Codes in Structural Engineering’, Dubrovnic, Croatia, May 3–5, 2010.
- Caspeele R, Taerwe L. Bayesian assessment of the characteristic concrete compressive strength u sing combined vague-informative priors. Const. Build. Mater. 2012; 28: 342–350.
- Torrent RJ. The log-normal distribution: a better fitness for the results of mechanical testing of materials. Mater. Struct. 1979; 11(64): 235–245.
- JCSS. Probabilistic Model Code. Internet publication, http://www.jcss.ethz.ch, Zürich, Switzerland, 2001. ISBN 978-3-909386-79-6.
- Gulvanessian H, Calgaro J-A, Holický M. Designers’ Guide to EN 1990 Eurocode: Basis of Structural Design. Thomas Telford: London, 2002.
- ISO 2394. General Principles on Reliability for Structures. ISO Standard, 1998.
- Madsen HO, Krenk S, Lind NC. Methods of Structural Safety. Prentice Hall: Englewood Cliffs, New Jersey, USA, 1986.
- Bowker AH, Lieberman GJ. Methodes Statistiques de l’Ingénieur. Prentice Hall: Englewood Cliffs, New Jersey, USA, 1959.
- Zupan D, Srpčič J, Turk G. Characteristic value determination from small samples. Struct. Safety 2007; 29: 268–278.
- ISO 12491. Statistical Methods for Durability Control of Building Materials and Components. ISO Standard, 1997.
- ISO 13822. Basis for Design of Structures – Assessment of Existing Structures. ISO Standard, 2003.
- Box G, Tiao G. Bayesian Inference in Statistical Analysis. Addison-Wesly Publishing Company: Boston, USA, 1973.
- Gelman A. Bayesian Data Analysis, 2nd edn. Chapman & Hall/CRC: Boca Raton, Florida, USA, 2004.
- Struck W. The calculation of one-sided lower tolerance limits (fractiles) in statistical evaluation of measurements (in German). Materalprüfung 1967; 9(6): 218–222.
- EN 206-1. Concrete – Part 1: Specification, Performance, Production and Conformity. European Standard, CEN, 2001.
- Petersons N. Should standard cube test specimens be replaced by test specimens taken from structures? Matér. Const. 1968; 1(5): 425–435.
- Ang AH-S, Tang WH. Probability Concepts in Engineering, 2nd edn. John Wiley & Sons: New York, 2007.
- Taerwe L. Aspects of the Stochastic Nature of Concrete Strength including Compliance Control (in Dutch). PhD Thesis, Ghent University, Ghent, Belgium, 1985.
- Taerwe L. Serial correlation in concrete strength records. In: Tuthill International Symposium on Concrete and Concrete Construction, Lewis H. Special Publication ACI SP-104: Detroit, 1987; 223–240.
- Caspeele R. Comparison of assessment techniques for determining the in-situ characteristic concrete compressive strength . Proceedings of 51st Forschungskolloquium des DAfStb, Kaiserslautern, Germany, November 11–12, 2010; 467–478.
- Taerwe L, Caspeele R. Conformity control of concrete: some basic aspects. In: Proceedings of 4th International Probabilistic Symposium, Dirk Proske Verlag. Proske D, Mehdianpour M, Gucma L (eds). Berlin, 2006; 57–70.