Investigation of green-glued laminated timber from the Congo Basin: durability, mechanical strength and variability trends of the bondlines

References

• Aicher S, Ahmad Z, Hirsch M. 2018. Bondline shear strength and wood failure of European and tropical hardwood glulams. European Journal of Wood and Wood Products. https://doi.org/10.1007/s00107-018-1305-0
   Google Scholar
• ANSI A 190.1–2012. 2013. Standard for wood products—structural glued laminated timber. Tacoma: APA, The Engineered Wood Association.
   Google Scholar
• ASTM D245. 2006. Standard practice for establishing structural grades and related allowable properties for visually graded lumber. West Conshohocken: ASTM International.
   Google Scholar
• Ayina O, Etaba V. 1996. Résistance des poutres lamellées collées industrielles en bois tropicaux collés aux pénacolites: le cas du bilinga. Bulletin Africain: Bioressources, Energie, Développement, Environnement 7: 9–13.
   Google Scholar
• Banea MD, da Silva LFM, Campilho RDSG. 2015. The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive. The Journal of Adhesion 91: 331–346. https://doi.org/10.1080/00218464.2014.903802
   Web of Science ®Google Scholar
• Bellassen V, Luyssaert S. 2014. Carbon sequestration: managing forests in uncertain times. Nature 506: 153–155. https://doi.org/10.1038/506153a
   PubMed Web of Science ®Google Scholar
• Bosu PP, Krampah E. 2005. Triplochiton scleroxylon K. Schum. In: Louppe D, Oteng-Amoako AA, Brink M (eds), PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale). Wageningen: Backhuys.
   Google Scholar
• Bourreau D, Aimene Y, Beauchêne J, Thibaut B. 2013. Feasibility of glued laminated timber beams with tropical hardwoods. European Journal of Wood and Wood Products 71: 653–662. doi: 10.1007/s00107-013-0721-4
   Web of Science ®Google Scholar
• Bretton C, Villoutreix G. 2005. Familles d’adhésifs et caractérisation d’un collage structural. Plastiques et Composites. Vol. AM4, No. AM3560.
   Google Scholar
• Bucci V, Corigliano P, Crupi V, Epasto G, Guglielmino E, Marino A. 2017. Experimental investigation on Iroko wood used in shipbuilding. Proceedings of the Institution of Mechanical Engineers, Part C. Journal of mechanical Engineering Science. 231: 128–139. doi: 10.1177/0954406216674495
   Google Scholar
• Casagrande S. 1998. Evaluation non-destructive des performances mécaniques des bois reconstitués [Non-destructive evaluation of mechanical performances in structural woods]. Annales Génie Civil Bois/Annals in Civil Engineering Wood 3: 27–28.
   Google Scholar
• Clouet B, Pommier R, Danis M. 2014. New composite timbers: full-field analysis of adhesive behavior. Journal of Strain Analysis for Engineering Design 49: 155–160. https://doi.org/10.1177/0309324713486894
   Web of Science ®Google Scholar
• Corigliano P, Crupi V, Epasto G, Guglielmino E, Maugeri N, Marinò A. 2017. Experimental and theoretical analyses of Iroko wood laminates. Composites Part B: Engineering 112: 251–264. https://doi.org/10.1016/j.compositesb.2016.12.049
   Web of Science ®Google Scholar
• Custodio J, Broughton J, Crus H. 2009. A review of factors influencing the durability of structural bond timber joints. International Journal of Adhesion and Adhesives 29: 173–185. doi: 10.1016/j.ijadhadh.2008.03.002
   Web of Science ®Google Scholar
• CTBA (Centre Technique du Bois et de l’Ameublement). 2003. Marque de qualité LCA (Lamellé-Collé-Aboutage). Carrelets. Menuiseries extérieures. Champs-sur-Marne: FCBA.
   Google Scholar
• Doumenge C, Séné VO. 2012. Lophira alata Banks ex C.F. Gaertn. In: Lemmens RHMJ, Louppe D, Oteng-Amoako AA (eds), PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale). Wageningen: Backhuys.
   Google Scholar
• De Melo JE, Pellicane PJ, de Souza MR. 2000. Goodness-offit analysis on wood properties data from six Brazilian tropical hardwoods. Wood Science and Technology 34: 83–97. doi: 10.1007/s002260000033
   Web of Science ®Google Scholar
• Elbez G, Bend D. 1991. Le collage du bois. Paris: Centre Technique du Bois et de l’Ameublement.
   Google Scholar
• EN 392. 1995. Glued laminated timber: shear test of glue lines. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• EN 386. 2001. Glued laminated timber: performance requirements and minimum production requirements. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• EN 301. 2006. Adhesives, phenolic and aminoplastic, for load-bearing timber structures: classification and performance requirements. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• EN 14080. 2013. Timber structures: glued laminated timber and glued solid timber – requirements. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• FAO (Food and Agriculture Organization of the United Nations). 2006. Global Forest Resources Assessment 2005: progress towards sustainable forest management. FAO Forestry Paper No. 147. Rome: FAO.
   Google Scholar
• FCBA (Forêt Cellulose Bois–Construction Ameublement). 2008. Le guide des essences de bois: 74 essences, les choisir, les reconnaître, les utiliser. Paris: Éditions Eyrolles.
   Google Scholar
• Frihart CR. 2004. Adhesive interactions with wood. In: Winandy JE, Kamke FA (eds), Fundamentals of composite processing: proceedings of a workshop, Madison, Wisconsin, 2004. General Technical Report FPL-GTR-149. Madison: United States Department of Agriculture, Forest Service, Forest Products Laboratory.
   Google Scholar
• Gérard J. 1999. Les spécificités du collage des bois tropicaux: valorisation des essences secondaires et collage multi-essences. Annales GC Bois Numéro spécial: Collage structural: 15–40.
   Google Scholar
• Gleich DM, Van Tooren MJL, Beukers A. 2012. Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures. Journal of Adhesion Science and Technology 15: 1091–1101. https://doi.org/10.1163/156856101317035503
   Google Scholar
• González-Prieto O, Casas Miras JM, Torres LO. 2021. Finger-jointing of green Eucalyptus globulus L. wood with one-component polyurethane adhesives. European Journal of Wood and Wood Products. https://doi.org/10.1007/s00107-021-01770-7
   Google Scholar
• Guiscafre J, Sales C. 1980. Bondability study of Azobe (Lophira alata) using resorcinol-formaldehyde adhesive. Internal report [In French]. Nogent-sur-Marne: Centre Technique Forestier Tropical.
   Google Scholar
• Guitard D. 1994. Comportement mécanique du bois. In: Jodin P (ed.), Le bois matériau d’ingénierie. Nancy: Arbolor. pp 91–125.
   Google Scholar
• Hänsel A, Sandak J, Sandak A, Mai J, Niemz P. 2021. Selected previous findings on the factors influencing the gluing quality of solid wood products in timber construction and possible developments: a review. Wood Material Science and Engineering. https://doi.org/10.1080/17480272.2021.1925963
   Google Scholar
• Ingram V, Ndoye O, Iponga DM, Tieguhong JC, Chupezi J, Nasi R. 2012. Les produits forestiers non ligneux: contribution aux économies nationales pour une gestion durable. In: Etat des Forêts de l’Afrique Centrale 2010. Luxembourg: Publication Office of European Union. pp 137–154.
   Google Scholar
• IUCN (International Union for Conservation of Nature). 2013. The IUCN Red List of Threatened Species. Version 2013.1. Available at www.iucnredlist.org [accessed 6 July 2013].
   Google Scholar
• Iždinský J, Reinprecht L, Sedliačik J, Kúdela J, Kučerová V. 2021. Bonding of selected hardwoods with PVAc adhesive. Applied Sciences 11: 67. https://doi.org/10.3390/app11010067
   Google Scholar
• Jansen PCM. 2005. Pterocarpus soyauxii Taub. In: Louppe D, Oteng-Amoako AA, Brink M (eds), PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale). Wageningen: Backhuys.
   Google Scholar
• Jeandreau JP. 2007. Calcul et dimensionnement des assemblages collés. 14e Journées d’étude sur l’adhésion. Session de formation, 27–28 Septembre 2007. Paris: Société Française du Vide.
   Google Scholar
• Kägi A, Niemz P, Mandallaz D. 2006. Influence of moisture content and selected technological parameters on the adhesion of one-part polyurethane adhesives under extreme climatical conditions. Holz als Roh und Werkstoff 64: 261–268. doi: 10.1007/s00107-005-0088-2
   Google Scholar
• Karastergiou S, Mantanis GI, Skoularakos K. 2008. Green-gluing of oak wood (Quercus conferta L.) with a one-component polyurethane adhesive. Wood Material Science and Engineering 3: 79–82. https://doi.org/10.1080/17480270802605537
   Google Scholar
• Lipke M. 2005. Green-glued finger-joint wall studs: industrial experience of Hampton Lumber Mills. In: Källander B (ed.), Proceedings of COST Action E34 International Workshop ‘Green-gluing of wood: process, products, market’, 7–8 April 2005, Borås, Sweden. pp 91–98.
   Google Scholar
• Lopez-Anido R, Michael AP, Sandford TC. 2003. Experimental characterization of FRP composite-wood pile structural response by bending tests. Marine Structures 16: 257–274. https://doi.org/10.1016/S0951-8339(03)00021-2
   Web of Science ®Google Scholar
• Luedtke J, Amen C, van Ofen A, Lehringer C. 2015. 1C-PUR-bonded hardwoods for engineered wood products: influence of selected processing parameters. European Journal of Wood and Wood Products 73: 167–178. doi: 10.1007/s00107-014-0875-8
   Web of Science ®Google Scholar
• Makomra V, Oum Lissouck R, Pommier R, Ngoc AP, Breysse D, Denaud L, Ayina Ohandja LM. 2020. Analysis of drying stresses in green-glued plywood of Bete (Mansonia Altissima) species. Journal of Wood Science 66: 70. https://doi.org/10.1186/s10086-020-01911-1
   Web of Science ®Google Scholar
• Ministry of Agriculture, Forestry and Fisheries, Japan. 2007. Notification No. 1152. Japanese agricultural standard for glued laminated timber. Tokyo: Ministry of Agriculture, Forestry and Fisheries.
   Google Scholar
• Morlier P, De Jeso B, Daude G, Dimier G. 2002. Composition adhésive pour matériau humide [Adhesive composition for wet material]. Patent 2: 842–818.
   Google Scholar
• MS 758. 1981. Specification for glued-laminated timber structural members. Shah Alam, Malaysia: Standards and Industrial Research Institute of Malaysia (SIRIM).
   Google Scholar
• MTIB (Ministry of Plantation Industries and Commodities). 2009. The Malaysian grading rules for sawn hardwood timber. Kuala Lumpur: Malaysian Timber Industry Board.
   Google Scholar
• MTIB (Ministry of Plantation Industries and Commodities). 2010. 100 Malaysian timbers. Kuala Lumpur: Malaysian Timber Industry Board.
   Google Scholar
• Nyobe CJ, Oum Lissouck R, Ayina Ohandja LM, Yamb E. 2021. Variability of the mechanical strength of Congo Basin timbers. Wood Material Science and Engineering. https://doi.org/10.1080/17480272.2021.1912173
   Google Scholar
• Opuni-Frimpong NY, Opuni-Frimpong E. 2012. Nauclea diderrichii (De Wild. & T. Durand) Merr. In: Lemmens RHMJ, Louppe D, Oteng-Amoako AA (eds), PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale). Wageningen: Backhuys.
   Google Scholar
• Oum Lissouck R, Pommier R, Breysse D, Ayina Ohandja LM, Dong A, Mansié R. 2016. Clustering for preservation of endangered timber species from the Congo Basin. Journal of Tropical Forest Science 28: 4–20.
   Web of Science ®Google Scholar
• Oum Lissouck R, Pommier R, Taillandier F, Mvogo JK, Breysse D, Ayina Ohandja LM. 2018. A decision support tool approach based on the Electre TRI-B method for the valorisation of tropical timbers from the Congo Basin: an application for glulam products. Southern Forests: a Journal of Forest Science 80: 361–371. https://doi.org/10.2989/20702620.2018.1463153
   Web of Science ®Google Scholar
• Ourmama M, Oum Lissouck R, Ayina Ohandja LM. 2021. Influence of mixing tropical timber species and material heterogeneities on the long-term stability of slender glulam beam columns. Wood Material Science and Engineering. https://doi.org/10.1080/174802 72.2021.1977695
   Google Scholar
• Owusu FW, Louppe D. 2012. Distemonanthus benthamianus Baill. Fiche de PROTA4U. In: Lemmens RHMJ, Louppe D, Oteng-Amoako AA (eds), PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale). Wageningen: Backhuys.
   Google Scholar
• Pettitt AN. 1976. A two-sample Anderson–Darling rank statistic. Biometrika 63: 161–168.
   Web of Science ®Google Scholar
• Pommier R. 2006. Compréhension de l’aboutage du bois vert: élaboration du procédé et principes physico-mécaniques appliqués au pin maritime. PhD thesis, University of Bordeaux, France.
   Google Scholar
• Pröller M, Nocetti M, Brunetti M, Barbu MC, Blumentritt M, Wessels CB. 2018. Influence of processing parameters and wood properties on the edge gluing of green Eucalyptus grandis with a one-component PUR adhesive. European Journal of Wood and Wood Products 76: 1195–1204. https://doi.org/10.1007/s00107-018-1313-0
   Web of Science ®Google Scholar
• Sales C. 1981. Etude de l’aptitude à l’utilisation en lamellé collé des bois de Brachystegia mildraedii et laurentii Nogent. Document technique et de recherche. Nogent-sur-Marne, France: GERDAT-CTFT.
   Google Scholar
• Schmidt M, Knorz M. (2010). Gluing of European beech (Fagus sylvatica L.) and Douglas fir (Pseudotsuga menziesii Mirb.) for load bearing timber structures. In Proceedings. 11th World Conference on Timber Engineering (Vol. 1, pp. 20–24).
   Google Scholar
• Sosef MSM, Boer E, Keating WG, Sudo S, Phuphathanaphong L. 1995. Terminalia L. In: Lemmens RHMJ, Soerianegara I, Wong WC (eds), Plant resources of South-East Asia no. 5(2). Timber trees: minor commercial timbers. Leiden: Backhuys. pp 474–492.
   Google Scholar
• Teles RF, Del Menezzi CHS, De Souza F, De Souza M. 2013. Theoretical and experimental deflections of glued laminated timber beams made from a tropical hardwood. Wood Material Science and Engineering 8: article 8994. http://doi.org/10.1080/17480272.2012.700644
   Google Scholar
• Verma CS, Sharma Naresh KR, Chariar VM, Maheshwari S, Hada MK. 2014. Comparative study of mechanical properties of bamboo laminae and their laminates with woods and wood-based composites. Composites Part B: Engineering 60: 523–530. https://doi.org/10.1016/j.compositesb.2013.12.061
   Web of Science ®Google Scholar
• Wessels CB, Nocetti M, Michele B, Crafford P, Pröller M. 2020. Green-glued engineered products from fast-growing Eucalyptus trees: a review. European Journal of Wood and Wood Products 78: 933–940. https://doi.org/10.1007/s00107-020-01553-6
   Web of Science ®Google Scholar
• Yang TH, Wang SY, Lin CJ, Tsai MJ. 2008. Evaluation of the mechanical properties of Douglas fir and Japanese cedar lumber and its structural glulam by non-destructive techniques. Construction and Building Materials 22: 487–493. doi: 10.1016/j.conbuildmat.2006.11.012
   Web of Science ®Google Scholar