234
Views
5
CrossRef citations to date
0
Altmetric
Original Article

Influence of successive light-activation on degree of conversion and knoop hardness of the first layered composite increment

, , , , &
Pages 126-131 | Received 29 May 2014, Accepted 07 Aug 2014, Published online: 14 Oct 2014

References

  • Ferracane JL. Resin composite-State of the art. Dent Mater 2011;27:29–38.
  • Knezevic A, Tarle Z, Menigaia A, Sutalo J, Pichler G, Ristic M. Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes. J Oral Rehabil 2012;8:586–91.
  • Aguiar FHB, Oliveira TRV, Lima DANL, Ambrosano GM, Lovadino JR. Microhardness of different thickness by conventional photocuring at different distances. Gen Dent 2008;56:144–8.
  • Hansen EK, Asmussen E. Visible-light curing units: correlation between depth of cure and distance between exit window and resin surface. Acta Odontol Scand 1997;55:162–6.
  • Rode KM, Kawano Y, Turbino ML. Evaluation of curing light distance on resin composite microhardness and polymerization. Oper Dent 2007;32:571–8.
  • Arikawa H, Fujii K, Kanie T, Inoue K. Light transmittance characteristics of light-cured composite resins. Dent Mater 1998;14:401–11.
  • El-Mowafy O, El-Badrawy W, Wasef M, Omar H, Kermanshahi S. Efficacy of new light-curing units in hardening of class II composite restoration. J Can Dent Assoc 2007;73:253.
  • Ilie N, Bauer H, Draenert M, Hickel R. Resin-based composite light-cured properties assessed by laboratory standards and simulated clinical conditions. Oper Dent 2013;38:159–67.
  • Rueggeberg FA. State-of-the-art: dental photocuring – A review. Dent Mater 2011;27:39–52.
  • Nomoto R, Asada M, McCabe J, Hirano S. Light exposure required for optimum conversion of light activated resin systems. Dent Mater 2006;22:1135–42.
  • Catelan A, Mainardi MCAJ, Soares GP, Lima AF, Ambrosanao GMB, Lima DANL, et al. Effect of light curing protocol on degree of conversion of composites. Acta Odontol Scand 2014;26:1–5.
  • Lima AF, Andrade KMG, Alves LEC, Soares GP, Marchi GM, Aguiar FH, et al. Influence of light source and extended time of curing on microhardness and degree of conversion of different regions of a nanofilled composite resin. Eur J Dent 2012;6:153–7.
  • Aguiar FH, Lazzari CR, Lima DA, Ambrosano GM, Lovadino JR. Effect of light curing tip distance and resin shade on microhardness of a hybrid resin composite. Braz Oral Res 2005;19:302–6.
  • Niu Y, Ma X, Fan M, Zhu S. Effects of layering techniques on the micro-tensile bond strength to dentin in resin composite restorations. Dent Mater 2009;25:129–34.
  • Dos Santos GB, Molte Alto RV, Sampaio Filho HR, da Silva EM, Fellows CE. Light transmission on dental resin composites. Dent Mater 2008;24:571–6.
  • Watts DC, Amer OM, Combe EC. Surface hardness development in light-cured composites. Dent Mater 1987;3:265–9.
  • Yap AU, Wong W, Siow KS. Composite cure and shrinkage associated with a high intensity curing unit. Oper Dent 2003;28:357–64.
  • Hubbezoglu I, Bolayir G, Dogan OM, Dogan A, Ozer A, Bek B. Microhardness evaluation of resin composite polymerized by three different light sources. Dent Mater J 2007;26:845–53.
  • Sakaguchi RL, Berge HX. Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites. J Dent 1998;26:695–8.
  • Bracket WW, Hisch LD, Covey DA. Effect of plasma arc curing on microleakage of class V resin-based composite restoration. Am J Dent 2000;13:121–2.
  • Oesterle LJ, Newman SM, Shellhart WC. Rapid curing of bonding composite with a xenon plasma arc light. Am J Orthod Dentofacial Orthop 2001;119:610–16.
  • Halvorson RH, Erickson RL, Davidson CL. Energy dependent polymerization of resin-based composite. Dent Mater 2002;18:463–9.
  • Witzel MF, Calheiros FC, Gonçalves F, Kawano Y, Braga RR. Influence of photoactivation method on conversion, mechanical properties, degradation in ethanol and contraction stress of resin-based materials. J Dent 2005;33:773–9.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.