References
- Ng, P., Lee, P.S.V., Goh, J.C.H., 2002, Prosthetic sockets fabrication using rapid prototyping technology. Rapid Prototyping Journal, 8, 53–59.
- Xu, F., Loh, H.T., Wong, Y.S., 1999, Considerations and selection of optimal orientation for different rapid prototyping systems. Rapid Prototyping Journal, 5, 54–60.
- Guarino, J., Tennyson, S., McCain, G., Bond, L., Shea, K., King, H., 2007, Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis. Journal of Pediatric Orthopaedics, 27, 955–960.
- Hung, S.S., Lee, Z.L., Lee, M.Y., 2008, Clinical application of rapid prototype model in pediatric proximal femoral corrective osteotomy. Orthopedics, 31, 72.
- McGurk, M., Amis, A.A., Potamianos, P., Goodger, N.M., 1997, Rapid prototyping techniques for anatomical modelling in medicine. Annals of the Royal College of Surgeons of England, 79, 169–174.
- Wagner, J.D., Baack, B., Brown, G.A., Kelly, J., 2004, Rapid 3-dimensional prototyping for surgical repair of maxillofacial fractures: a technical note. Journal of Oral and Maxillofacial Surgery, 62, 898–901.
- Xia D., Gui L., Zhang Z., Lu C., Niu F., Jin J., Liu X., 2005, Fabrication of 3-dimensional skull model with rapid prototyping technique and its primary application in repairing one case of craniomaxillofacial trauma. Chinese Journal of Reparative and Reconstructive Surgery, 19, 811–814.
- Chelule, K.L., Coole, T., Cheshire, D.G., 2000, Fabrication of medical models from scan data via rapid prototyping techniques. School of Engineering and Advanced Technology, Staffordshire University. Available online at: http://www.deskartes.com/.../ fabrication_of_medical_models_fr.htm. Accessed on 6 August 2009)
- Winder, J., Cooke, R.S., Gray, J., Fannin, T., Fegan, T., 1999, Medical rapid prototyping and 3d ct in the manufacture of custom made cranial titanium plates. Journal of Medical Engineering & Technology, 23, 26–28.
- Chartoff, R., Steidle, C., Klosterman, D., Graves, G., Osborne, N., 1999, Automated fabrication of custom bone implants using rapid prototyping. Rapid Prototyping Development Laboratory, University of Dayton. Available online at: http://www.touchbriefings.com/download.cfm?fileID=1959 (accessed on 24 October 2009)
- Baumgaertner, M.R., 1999, Fractures of the posterior wall of the acetabulum. Journal of the American Academy of Orthopedic Surgeons, 7, 54–65.
- Browner, B.D., Helfet, D.L., 1991, Internal fixation of a fractured acetabulum. Strategies in Orthopaedic Surgery, 10, 1–16.
- Ludwig, S.C., Kramer, D.L., Balderston, R.A., Vaccaro, A.R., Foley, K.F., Albert, T.J., 2000, Placement of pedicle screws in the human cadaveric cervical spine: comparative accuracy of three techniques. Spine, 25, 1655–1667.
- Ludwig, S.C., Kramer, D.L., Vaccaro, A.R., Albert. T.J., 1999, Transpedicle screw fixation of the cervical spine, Clinical Orthopedics, 359, 77–88.
- Cheung, L.K., Wong, M.C., Wong, L.L., 2002, Refinement of facial reconstructive surgery by stereo-model planning. Annals of the Royal Australasian College of Dental Surgeons, 16, 129–132.