Techniques to assess film coatings and evaluate film-coated products

References

• Bechard SR, Quraishi O, Kwong E. (1992). Film coating: Effect of titanium dioxide concentration and film thickness on the photostability of nifedipine. Int J Pharm, 87:133–9.
   Web of Science ®Google Scholar
• Baert L, Remon JP. (1993). Water vapour permeation of aqueous based ethylacrylate methylmethacrylate copolymer films. Int J Pharm, 99:181–7.
   Web of Science ®Google Scholar
• Felton LA, Timmins GS. (2006). A nondestructive technique to determine the rate of oxygen permeation into solid dosage forms. Pharm Dev Technol, 11:1–7.
   Web of Science ®Google Scholar
• Lecomte F, Siepmann J, Walther M, MacRae RJ, Bodmeier R. (2004). Polymer blends used for the coating of multiparticulates: Comparison of aqueous and organic coating techniques. Pharm Res, 21(5):882–90.
   PubMed Web of Science ®Google Scholar
• Dashevsky A, Wagner K, Kolter K, Bodmeier R. (2005). Physicochemical and release properties of pellets coated with Kollicoat SR 30 D, a new aqueous polyvinyl acetate dispersion for extended release. Int J Pharm, 290:15–23.
   PubMed Web of Science ®Google Scholar
• Lecomte F, Siepmann J, Walther M, MacRae RJ, Bodmeier R. (2005). pH-sensitive polymer blends used as coating materials to control drug release from spherical beads: Elucidation of the underlying mass transport mechanisms. Pharm Res, 22(7):1129–41.
   PubMed Web of Science ®Google Scholar
• Zheng W, Sauer D, McGinity JW. (2005). Influence of hydroxyethylcellulose on the drug release properties of theophylline pellets coated with Eudragit RS 30 D. Eur J Pharm Biopharm, 59:147–54.
   PubMed Web of Science ®Google Scholar
• Obara S, McGinity JW. (1994). Properties of free films prepared from aqueous polymers by a spraying technique. Pharm Res, 11(11):1562–7.
   PubMed Web of Science ®Google Scholar
• Zaro JJJ. (1972). Techniques for preparing simulated coated dosage forms and preliminary evaluation of sprayed and cast films. J Pharm Sci, 61(5):814–5.
   PubMed Web of Science ®Google Scholar
• Porter SC (1980). The properties of enteric film coating polymers. PhD thesis, University of London, United Kingdom.
   Google Scholar
• Porter SC. (1982). The practical significance of the permeability and mechanical properties of polymer films used for the coating of pharmaceutical dosage forms. Int J Pharm Tech Prod Mfr, 3(1):21–5.
   Google Scholar
• Rowe RC. (1981). The cracking of film coatings on film-coated tablets—a theoretical approach with practical implications. J Pharm Pharmacol, 33:423–6.
   PubMed Web of Science ®Google Scholar
• Okhamafe AO, York P. (1983). Analysis of the permeation and mechanical characteristics of some aqueous-based film coating systems. J Pharm Pharmacol, 35:409–15.
   PubMed Web of Science ®Google Scholar
• Rowe RC. (1983). Correlations between the in-situ performance of tablet film coating formulations based on hydroxypropyl methylcellulose and data obtained from tensile testing of free films. Acta Pharm Technol, 29(3):205–7.
   Google Scholar
• Bodmeier R, Paeratakul O. (1992). Leaching of water-soluble plasticizers from polymeric films prepared from aqueous colloidal polymer dispersions. Drug Dev Ind Pharm, 18(17):1865–82.
   Web of Science ®Google Scholar
• Dashevsky A, Mohamad A. (2006). Development of pulsatile multiparticulate drug delivery system coated with aqueous dispersion Aquacoat® ECD. Int J Pharm, 318:124–31.
   PubMed Web of Science ®Google Scholar
• Bussemer T, Peppas NA, Bodmeier R. (2003). Time-dependent mechanical properties of polymeric coatings used in rupturable pulsatile release dosage forms. Drug Dev Ind Pharm, 29(6):623–30.
   PubMed Web of Science ®Google Scholar
• Bodmeier R, Paeratakul O. (1993). Dry and wet strengths of polymeric films prepared from an aqueous colloidal polymer dispersion, Eudragit RS30D. Int J Pharm, 96:129–38.
   Web of Science ®Google Scholar
• Bodmeier R, Paeratakul O. (1994). Mechanical properties of dry and wet cellulosic and acrylic films prepared from aqueous colloidal polymer dispersions used in the coating of solid dosage forms. Pharm Res, 11(6):882–8.
   PubMed Web of Science ®Google Scholar
• Chan LW, Ong KT, Heng PWS. (2005). Novel film modifiers to alter the physical properties of composite ethylcellulose films. Pharm Res, 22(3):476–88.
   PubMed Web of Science ®Google Scholar
• Rowe RC. (1983). A reappraisal of the equations used to predict the internal stresses in film coatings applied to tablet substrates. J Pharm Pharmacol, 35:112–3.
   PubMed Web of Science ®Google Scholar
• Croll SG. (1979). The origin of residual internal stress in solvent-cast thermoplastic coatings. J Appl Polym Sci, 23:847–58.
   Web of Science ®Google Scholar
• Sato K. (1980). The internal stress of coating films. Prog Org Coating, 8:143–60.
   Web of Science ®Google Scholar
• Okutgen E, Hogan JE, Aulton ME. (1995). Quantitative estimation of internal stress development in aqueous HPMC tablet film coats. Int J Pharm, 119:193–202.
   Web of Science ®Google Scholar
• Rowe RC. (1978). The measurement of the adhesion of film coatings to tablet surfaces: The effect of tablet porosity, surface roughness, and film thickness. J Pharm Pharmacol, 30:343–6.
   PubMed Web of Science ®Google Scholar
• Felton LA, McGinity JW. (1999). Adhesion of polymeric films to pharmaceutical solids. Eur J Pharm Biopharm, 47(1):1–14.
   PubMed Web of Science ®Google Scholar
• Felton LA, McGinity JW. (1996). The influence of tablet hardness and tablet hydrophobicity on the adhesive properties of an acrylic resin copolymer. Pharm Dev Technol, 1(4):381–9.
   PubMedGoogle Scholar
• Felton LA, McGinity JW. (1997). The influence of plasticizers on the adhesive properties of an acrylic resin copolymer to hydrophilic and hydrophobic tablet compacts. Int J Pharm, 154:167–78.
   Web of Science ®Google Scholar
• Rowe RC. (1978). The effect of some formulation and process variables on the surface roughness of film-coated tablets. J Pharm Pharmacol, 30:669–72.
   PubMed Web of Science ®Google Scholar
• Twitchell AM, Hogan JE, Aulton ME. (1995). Assessment of the thickness variation and surface roughness of aqueous film coated tablets using a light-section microscope. Drug Dev Ind Pharm, 21(14):1611–9.
   Web of Science ®Google Scholar
• Zhu Y, Shah NH, Malick AW, Infeld MH, McGinity JW. (2002). Solid-state plasticization of an acrylic polymer with chlorpheniramine maleate and triethyl citrate. Int J Pharm, 241:301–10.
   PubMed Web of Science ®Google Scholar
• Gruetzmann R, Wagner K. (2005). Quantification of the leaching of triethyl citrate/polysorbate 80 mixtures from Eudragit RS films by differential scanning calorimetry. Eur J Pharm Biopharm, 60:159–62.
   PubMed Web of Science ®Google Scholar
• Qussi B, Suess WG. (2006). The influence of different plasticizers and polymers on the mechanical and thermal properties, porosity and drug permeability of free shellac films. Drug Dev Ind Pharm, 32:403–12.
   PubMed Web of Science ®Google Scholar
• Gutierrez-Rocca JC, McGinity JW. (1994). Influence of water soluble and insoluble plasticizers on the physical and mechanical properties of acrylic resin copolymers. Int J Pharm, 103:293–301.
   Web of Science ®Google Scholar
• Wu C, McGinity JW. (1999). Non-traditional plasticization of polymeric films. Int J Pharm, 177:15–27.
   PubMed Web of Science ®Google Scholar
• Nutan MTH, Vaithiyalingam SR, Khan MA. (2007). Controlled release multiparticulate beads coated with starch acetate: Material characterization, and identification of critical formulation and process variables. Pharm Dev Technol, 12:307–20.
   PubMed Web of Science ®Google Scholar
• Nyamweya N, Hoag SW. (2000). Assessment of polymer–polymer interactions in blends of HPMC and film forming polymers by modulated temperature differential scanning calorimetry. Pharm Res, 17(5):625–31.
   PubMed Web of Science ®Google Scholar
• Chidavaenzi OC, Buckton G, Koosha F, Pathak R. (1997). The use of thermal techniques to assess the impact of free concentration on the amorphous content and polymorphic forms present in spray dried lactose. Int J Pharm, 159:67–74.
   Web of Science ®Google Scholar
• Fearon PK, Marshall N, Billingham NC, Bigger SW. (2001). Evaluation of the oxidative stability of multiextruded polypropylene as assessed by physicomechanical testing and simultaneous differential scanning calorimetry-chemiluminescence. J Appl Polym Sci, 79(4):733–41.
   Web of Science ®Google Scholar
• Felton LA, Shah K, Yang J, Omidian H, Rocca JG. (2007). A rapid technique to evaluate the oxidative stability of a model drug. Drug Dev Ind Pharm, 33:1–7.
   Web of Science ®Google Scholar
• Amighi K, Moes A. (1996). Influence of plasticizer concentration and storage conditions on the drug release rate from Eudragit RD30D film-coated sustained-release theophylline pellets. Eur J Pharm Biopharm, 42(1):29–35.
   Web of Science ®Google Scholar
• Flosser A, Kolter K, Reich HB, Schepky G. (2000). Variation of composition of an enteric formulation based on Kollicoat MAE 30D. Drug Dev Ind Pharm, 26(2):177–87.
   PubMed Web of Science ®Google Scholar
• Price DM, Reading M, Hammiche A, Pollock HM. (1999). Microthermal analysis: Scanning thermal microscopy and localized thermal analysis. Int J Pharm, 192:85–96.
   PubMed Web of Science ®Google Scholar
• Ruotsalainen M, Heinamaki J, Guo H, Laitinen N, Yliruusi J. (2003). A novel technique for imaging film coating defects in the film-core interface and surface of coated tablets. Eur J Pharm Biopharm, 56:381–8.
   PubMed Web of Science ®Google Scholar
• Missaghi S, Fassihi R. (2004). A novel approach in the assessment of polymeric film formation and film adhesion on different pharmaceutical solid substrates. AAPS PharmSciTech, 5(2): Article 29.
   PubMed Web of Science ®Google Scholar
• Felton LA, Yang J. (2005). Confocal laser scanning microscopy to investigate drug migration into a sustained release coating. Miami, FL: Controlled Release Society Annual Meeting.
   Google Scholar
• Felton LA. (2007). Characterization of coating systems. AAPS PharmSciTech, 8(4):E1–9.
   PubMed Web of Science ®Google Scholar
• Wetlaufer LA, Scott WE. (1940). The measurement of gloss. Ind Eng Chem Anal Ed, 12(11):647–52.
   Google Scholar
• Rowe RC, Forse SF. (1983). The refractive indices of polymer film formers, pigments and additives used in tablet film coating: Their significance and practical application. J Pharm Pharmacol, 35:205–7.
   PubMed Web of Science ®Google Scholar
• Rowe RC. (1985). Gloss measurement on film coated tablets. J Pharm Pharmacol, 37:761–5.
   PubMed Web of Science ®Google Scholar
• Felton LA, Perry WL. (2002). A novel technique to quantify film-tablet interfacial thickness. Pharm Dev Technol, 7(1):1–5.
   PubMed Web of Science ®Google Scholar
• Barbash D, Fulghum JE, Yang J, Felton LA. (2009). Influence of atomization air pressure on film-tablet interfacial thickness. Drug Dev Ind Pharm, 35:480–7.
   PubMed Web of Science ®Google Scholar
• Nadkarni PD, Kildsig DO, Kramer PA, Banker GS. (1975). Effects of surface roughness and coating solvent on film adhesion to tablets. J Pharm Sci, 64:1554–7.
   PubMed Web of Science ®Google Scholar
• Schwartz N, Brown R (1961). Transactions of the eighth national vacuum symposium. American Vacuum Society, New York City, Macmillan.
   Google Scholar
• Rowe RC. (1979). Surface roughness measurements on both uncoated and film-coated tablets. J Pharm Pharmacol, 31:473–4.
   PubMed Web of Science ®Google Scholar
• Drefko W, Porter S, Terzian L, Etienne S. (2008). Evaluation of various techniques for assessing the characteristics of film-coated tablets. Atlanta, GA: American Association of Pharmaceutical Scientists.
   Google Scholar
• Hadfield P, Bayhan N, Porter S, Drefko W. (2008). An investigation into the effects of increasing the superdisintegrant content in a tablet formulation on the ease of film coating using visual and surface roughness analysis to evaluate surface effects. Atlanta, GA: American Association of Pharmaceutical Scientists.
   Google Scholar
• Cogdill RP, Forcht RN, Shen Y, Taday PF, Creekmore JR, Anderson CA, . (2007). Comparison of terahertz pulsed imaging and near infrared spectroscopy for rapid, non-destructive analysis of tablet coating thickness and uniformity. J Pharm Innov, 2:29–36.
   Google Scholar
• Ho L, Müller R, Gordon KC, Kleinebudde P, Pepper M, Rades T, . (2008). Applications of terahertz pulsed imaging to sustained-release tablet film coating quality assessment and dissolution performance. J Control Release, 127:79–87.
   PubMed Web of Science ®Google Scholar
• Hadfield PJ, Arsalan Y, Bayhan N, Pederson M. (2007). A preliminary study to examine the effects of process variables on the performance of an applied enteric coating and study the resultant coating characteristics using terahertz imaging technology. San Diego, CA: American Association of Pharmaceutical Scientists.
   Google Scholar
• Spencer JA, Gao Z, Moore T, Buhse LF, Taday PF, Newnham DA, . (2007). Delayed release tablet dissolution related to coating thickness by terahertz pulsed imaging mapping. J Pharm Sci, 97:1543–50.
   Web of Science ®Google Scholar
• Davies MC, Wilding IR, Short RD, Khan MA, Watts JF, Melia CD. (1989). An analysis of the surface chemical structure of polymethacrylate (Eudragit) film coating polymers by XPS. Int J Pharm, 57:183–7.
   Web of Science ®Google Scholar
• Buckton G, Bulpett R, Verma N. (1991). Surface analysis of pharmaceutical powders: X-ray photoelectron spectroscopy (XPS) related to powder wettability. Int J Pharm, 72:157–62.
   Web of Science ®Google Scholar
• Burke GM, Wurster DE, Berg MJ, Veng-Pedersen P, Schottelius DD. (1992). Surface characterization of activated charcoal by X‐ray photoelectron spectroscopy (XPS): Correlation with phenobarbital absorption data. Pharm Res, 9(1):126–30.
   PubMed Web of Science ®Google Scholar
• Pearnchob N, Siepmann J, Bodmeier R. (2003). Pharmaceutical applications of shellac: Moisture-protective and taste-masking coatings and extended-release matrix tablets. Drug Dev Ind Pharm, 29(8):925–38.
   PubMed Web of Science ®Google Scholar
• Ruotsalainen M, Heinamaki J, Taipale K, Yliruusi J. (2003). Influence of the aqueous film coating process on the properties and stability of tablets containing a moisture-labile drug. Pharm Dev Technol, 8(4):443–51.
   PubMed Web of Science ®Google Scholar
• Okor RS. (1987). Casting solvent effects on the permeability of polymer films of differing quaternary ammonium (cation) content. J Pharm Pharmacol, 39:547–8.
   PubMed Web of Science ®Google Scholar
• Guo J-H. (1993). Effects of plasticizers on water permeation and mechanical properties of cellulose acetate: Antiplasticization in slightly plasticized polymer film. Drug Dev Ind Pharm, 19(13):1541–55.
   Web of Science ®Google Scholar
• Sundaram GM, Franco JE. (2002). Moisture sorption study on chewable tablet blends using dynamic vapor sorption technique. Toronto, Canada: American Association of Pharmaceutical Scientists.
   Google Scholar
• Hassel RL, Hesse ND. (2007). Investigation of pharmaceutical stability using dynamic vapor sorption analysis. Newcastle, DE: TA Instruments Training Course.
   Google Scholar
• Hassel RL, Hesse ND. (2007). Dynamic vapor sorption characterization of pharmaceutical recrystallization. Newcastle, DE: TA Instruments Training Course.
   Google Scholar
• Agrawal AM, Manek RV, Kolling WM, Neau SH. (2003). Studies on the interaction of water with ethylcellulose: Effect of polymer particle size. AAPS PharmSciTech, 4(4):1–11.
   Google Scholar
• Bley O, Siepmann J, Bodmeier R. (2009). Characterization of moisture-protective polymer coatings using differential scanning calorimetry and dynamic vapor sorption. J Pharm Sci, 98(2):651–64.
   PubMed Web of Science ®Google Scholar
• List PH, Kassis G. (1982). On the permeability of various tablet coatings to water vapour and oxygen. Acta Pharm Technol, 28:21–33.
   Google Scholar
• Gulian FJ, Steffenino RM, Ferrizzi DM, Farrell TP. (2004). Oxidative protection of ibuprofen using Opadry fx special effects film coating system. AAPS PharmSci, 6(4):W5078.
   Google Scholar
• Butler BL, Vergano PJ, Testin RF, Bunn JM, Wiles JL. (1996). Mechanical and barrier properties of edible chitosan films as affected by composition and storage. J Food Sci, 61(5):953–6.
   Web of Science ®Google Scholar
• Liu KJ, Gast P, Moussavi M, Norby SW, Vahidi N, Walczak T, . (1993). Lithium phthalocyanine: A probe for electron paramagnetic resonance oximetry in viable biological systems. Proc Natl Acad Sci, 90:5438–42.
   PubMed Web of Science ®Google Scholar
• Cunningham C, Kinsey BR, Scattergood LK, Turnbull N. (2002). The effect of tablet shape on the application of an enteric film coating. Toronto, Canada: American Association of Pharmaceutical Scientists.
   Google Scholar