References
- Turton R. (2008). Challenges in the modeling and prediction of coating of pharmaceutical dosage forms. Powder Technol, 181:186–94.
- Werner SRL, Jones JR, Paterson AHJ, Archer RH, Pearce DL. (2007). Air-suspension particle coating in the food industry: Part I—state of the art. Powder Technol, 171:25–33.
- Werner SRL, Jones JR, Paterson AHJ, Archer RH, Pearce DL. (2007). Air-suspension particle coating in the food industry: Part I—micro-level process approach. Powder Technol, 171:34–45.
- Mann U, Rubinovitch M, Crosby EJ. (1979). Characterization and analysis of continuous recycle systems. AIChE J, 25:873–82.
- Mann U. (1983). Analysis of spouted-bed coating and granulation. 1. Batch operation. Ind Eng Chem Process Des Dev, 22:288–92.
- Cheng XX, Turton R. (2000). The prediction of variability occurring in fluidized bed coating equipment part 1: The role of non-uniform particle coverage as particles pass through the spray zone. Pharm Dev Technol, 5:323–32.
- Cheng XX, Turton R. (2000). The prediction of variability occurring in fluidized bed coating equipment part 2: The role of non-uniform particle coverage as particles pass through the spray zone. Pharm Dev Technol, 5:323–32.
- Christensen FN, Bertelsen P. (1997). Qualitative description of the Wurster-based fluid-bed coating process. Drug Devel and Ind Pharm, 23:45–63.
- Shelukar S, Ho J, Zega J, Roland E, Yeh N, Quiram D, . (2000). Identification and characterization of factors controlling tablet coating uniformity in a Wurster coating process. Powder Technol, 110:29–36.
- Sherony DF. (1981). A model of surface renewal with application to fluid bed coating of particles. Chem Eng Sci, 36:845–8.
- Wnukowski P, Setterwall F. (1989). The coating of particles in a fluidized bed (residence time distribution in a system of two coupled perfect mixers). Chem Eng Sci, 44:493–505.
- Maronga SJ, Wnukowski P. (1997). Modeling of the three-domain fluidized-bed particulate coating process. Chem Eng Sci, 52:2915–25.
- Denis C, Hemati M, Chulia D, Lanne J-Y, Buisson B, Daste G, . (2003). A model of surface renewal with application to the coating of pharmaceutical tablets in rotary drums. Powder Technol, 130:174–80.
- Khakhar DV, McCarthy JJ, Shinbrot T, Ottino JM. (1997). Transverse flow and mixing of granular materials in a rotating cylinder. Phys Fluids, 9:31–43.
- KuShaari K, Pandey P, Song Y, Turton R. (2006). Monte Carlo simulation to determine coating uniformity in a Wurster fluidized bed coating process. Powder Technol, 166:81–90.
- Choi MMS, Miesen A. (1997). Sulfur coating of urea in shallow spouted beds. Chem Eng Sci, 52:1073–86.
- Nakamura H, Abe E, Yamada N. (1988). Coating mass distribution of seed particles in a tumbling fluidized bed coater Part II. A Monte Carlo simulation of particle coating. Powder Technol, 99:140–6.
- Pandey P, Katakdaunde M, Turton R. (2006). Modeling weight variability in a pan coating process using Monte Carlo simulations. AAPS PharmSciTech, 7(4):E1–10.
- Sandadi S, Pandey P, Turton R. (2004). In-situ, near real-time acquisition of particle motion in rotating pan coating equipment using imaging techniques. Chem Eng Sci, 59:5807–17.
- Pandey P. (2006). Studies to investigate variables affecting coating uniformity in a pan coating device. Ph.D. Dissertation, West Virginia University, May 2006.
- Liu LX, Litster JD. (1993). Coating mass distribution from a spouted bed seed coater: Experimental and modeling studies. Powder Technol, 74:259–70.
- Sudsakorn K, Turton R. (2000). Nonuniformity of coating on a size distribution of particles in a fluidized bed coater. Powder Technol, 110:37–43.
- Duarte CR, Murata VV, Barrozo MAS. (2004). Study of the spouted bed fluid dynamics using CFD. In: Proceedings of the 14th International drying symposium, Sao Paulo, vol. A, 581–8.
- Magnusson AM, Van Wachem BGM, Almstedt AE. (2002). CFD model development and experimental validation of the three-dimensional hydrodynamics of a Wurster-type fluidized bed, Paper 275a, Presented at the annual AIChE meeting, Indianapolis.
- Littman H, Morgan MH, Narayanan PV, Kim SJ, Day JY, Lazarek GM. (1985). An axisymmetric model of flow in the annulus of a spouted bed of coarse particles. Model, experimental verification and residence time distribution. Can J Chem Eng, 63:188–94.
- Morgan MH, Day JY, Littman H. (1985). Spout voidage distribution, stability and particles circulation rates in spouted beds of coarse particles. Chem Eng Sci, 40:1367–77.
- Karlsson S, Rasmuson A, van Wachem B, Björn I. (2009). CFD modeling of the Wurster bed coater. AIChE J, 55:2578–90.
- Terashita K, Natsuyama S, Nishimura T, Sakamoto H. (2000). Design for fluidized bed with draft tube by DEM analysis. J Jpn Soc Powder Metall, 47:1306–11.
- Muguruma Y, Tanaka T, Tsuji Y. (2000). Numerical simulation of particulate flow with liquid bridge between particles (simulation of centrifugal tumbling granulator). Powder Technol, 109:49–57.
- Yamane K, Sato T, Tanaka T, Tsuji Y. (1995). Computer simulation of tablet motion in coating drum. Pharm Res, 12:1264–8.
- Muguruma Y, Tanaka T, Kawatake S, Tsuji Y. (1997). Discrete particle simulation of a rotary vessel mixer with baffles. Powder Technol, 93:261–6.
- Kalbag A, Wassgren C, Penumetcha SS, Pérez-Ramos JD. (2008). Inter-tablet coating variability: Residence times in a horizontal pan coater. Chem Eng Sci, 63:2881–94.
- Kalbag A, Wassgren CR. (2009). Inter-tablet coating variability: Tablet residence time variability. Chem Eng Sci, 64:2705–17.
- Song Y, Turton R, Kayihan F. (2006). Contact detection algorithms for DEM simulations of tablet-shaped particles. Powder Technol, 161:32–40.
- Song Y, Turton R. (2007). Study of the effect of liquid bridges on the dynamic behavior of two colliding tablets using DEM. Powder Technol, 178:99–108.