Melt granulation in fluidized bed: a comparative study of spray-on versus in situ procedure

References

• Andrews GP. Advances in solid dosage form manufacturing technology. Philos Trans R Soc Lond A 2007;365:2935–49
   Web of Science ®Google Scholar
• Heng PWS, Wong TW. Melt process for oral solid dosage forms. In: Swabrick J, ed. Encyclopedia of pharmaceutical technology. 3rd ed. New York (NY): Informa Healthcare; 2006:2257–61
   Google Scholar
• Evrard B, Delattre L. In vitro evaluation of lipid matries for the development of a sustained-release sulfamethazine bolus for lambs. Drug Dev Ind Pharm 1996;22:111–18
   Web of Science ®Google Scholar
• Hamdani J, Moës AJ, Amighi K. Development and evaluation of prolonged release pellets obtained by the melt pelletization process. Int J Pharm 2002;245:167–77
   PubMed Web of Science ®Google Scholar
• Mašić I, Ilić I, Dreu R, et al. An investigation into the effect of formulation variables and process parameters on characteristics of granules obtained by in situ fluidized hot melt granulation. Int J Pharm 2012;423:202–12
   PubMed Web of Science ®Google Scholar
• Pauli-Bruns A, Knop K, Lippold BC. Preparation of sustained release matrix pellets by melt agglomeration in the fluidized bed: influence of formulation variables and modeling of agglomerate growth. Eur J Pharm Biopharm 2010;74:503–12
   PubMed Web of Science ®Google Scholar
• Voinovich D, Moneghini M, Perissutti B, et al. Preparation in high-shear mixer of sustained-release pellets by melt pelletisation. Int J Pharm 2000;203:235–44
   PubMed Web of Science ®Google Scholar
• Zhou F, Vervaet C, Remon JP. Matrix pellets based on the combination of waxes, starches and maltodextrins. Int J Pharm 1996;133:155–60
   Web of Science ®Google Scholar
• Borini GB, Andrade TC, Freitas LAP. Hot melt granulation of coarse pharmaceutical powders in a spouted bed. Powder Technol 2009;189:520–7
   Web of Science ®Google Scholar
• Homar M, Dreu R, Burjak M, et al. Study of immediate release spherical microparticles containing clarithromycin using a hot-melt fluid bed technique. Acta Chim Slov 2011;58:318–25
   PubMed Web of Science ®Google Scholar
• Passerini N, Albertini B, Gonzalez-Rodriguez ML, et al. Preparation and characterization of ibuprofen-poloxamer 188 granules obtained by melt granulation. Eur J Pharm Sci 2002;15:71–8
   PubMed Web of Science ®Google Scholar
• Passerini N, Albertini B, Perissutti B, Rodriguez L. Evaluation of melt granulation and ultrasonic spray congealing as techniques to enhance the dissolution of praziquantel. Int J Pharm 2006;318:92–102
   PubMed Web of Science ®Google Scholar
• Passerini N, Calogerà G, Albertini B, Rodriguez L. Melt granulation of pharmaceutical powders: a comparison of high-shear mixer and fluidised bed processes. Int J Pharm 2010;391:177–86
   PubMed Web of Science ®Google Scholar
• Perissutti B, Rubessa F, Moneghini M, Voinovich D. Formulation design of carbamazepine fast release tablets prepared by melt granulation technique. Int J Pharm 2003;256:53–63
   PubMed Web of Science ®Google Scholar
• Vilhelmsen T, Eliasen H, Schæfer T. Effect of a melt agglomeration process on agglomerates containing solid dispersions. Int J Pharm 2005;303:132–42
   PubMed Web of Science ®Google Scholar
• Yang D, Kulkarni R, Behme RJ, Kotiyan PN. Effect of the melt granulation technique on the dissolution characteristics of griseofulvin. Int J Pharm 2007;329:72–80
   PubMed Web of Science ®Google Scholar
• Abberger T. Influence of binder properties, method of addition, powder type and operating conditions on fluid-bed melt granulation and resulting tablet properties. Pharmazie 2001;56:949–52
   PubMed Web of Science ®Google Scholar
• Kojima M, Nakagami H. Preparation of the controlled release matrix tablets of theophylline with micronized low-substituted hydroxypropyl cellulose by a fluidised hot-melt granulation method. STP Pharma Sci 2001;11:145–50
   Google Scholar
• Ansari MA, Stepanek F. Formation of hollow core granules by fluid bed in situ melt granulation: modelling and experiments. Int J Pharm 2006;32:108–16
   Web of Science ®Google Scholar
• Vilhelmsen T, Kristensen J, Schæfer T. Melt pelletization with polyethylene glycol in a rotary processor. Int J Pharm 2004;275:141–53
   PubMed Web of Science ®Google Scholar
• Walker GM, Holland CR, Ahmad MMN, Craig DQM. Influence of process parameters on fluidised hot-melt granulation and tablet pressing of pharmaceutical powders. Chem Eng Sci 2005;60:3867–77
   Web of Science ®Google Scholar
• Walker GM, Andrews G, Jones DS. Effect of process parameters on the melt granulation of pharmaceutical powders. Powder Technol 2006;165:161–6
   Web of Science ®Google Scholar
• Walker GM, Bell SEJ, Andrews G, Jones DS. Co-melt fluidised bed granulation of pharmaceutical powders: improvements in drug bioavailability. Chem Eng Sci 2007;62:451–62
   Web of Science ®Google Scholar
• Walker GM, Bell SEJ, Vann M, et al. Pharmaceutically engineering powders using FHMG: the effects of parameters and formulation variables. Chem Eng Res Des 2007;85:981–6
   Web of Science ®Google Scholar
• Walker GM, Bell SEJ, Vann M, et al. Fluidised bed characterisation using Raman spectroscopy: applications to pharmaceutical processing. Chem Eng Sci 2007;62:3832–8
   Web of Science ®Google Scholar
• Walker GM, Bell SEJ, Greene K, et al. Characterisation of fluidised bed granulation processes using in-situ Raman spectroscopy. Chem Eng Sci 2009;64:91–8
   Web of Science ®Google Scholar
• Zhai H, Li S, Andrews GP, Jones DS, et al. Nucleation and growth in fluidised hot melt granulation. Powder Technol 2009;189:230–7
   Web of Science ®Google Scholar
• Zhai H, Li S, Jones DS, et al. The effect of the binder size and viscosity on agglomerate growth in fluidised hot melt granulation. Chem Eng J 2010;164:275–84
   Web of Science ®Google Scholar
• Tan HS, Salman AD, Hounslow MJ. Kinetics of fluidised bed melt granulation. III: tracer studies. Chem Eng Sci 2005;60:3835–45
   Web of Science ®Google Scholar
• Tan HS, Salman AD, Hounslow MJ. Kinetics of fluidised bed melt granulation. I: the effect of process variables. Chem Eng Sci 2006;61:1585–601
   Web of Science ®Google Scholar
• Tan HS, Salman AD, Hounslow MJ. Kinetics of fluidised bed melt granulation. II: modelling the net rate of growth. Chem Eng Sci 2006;61:3930–41
   Web of Science ®Google Scholar
• Vilhelmsen T, Schæfer T. Agglomerate formation and growth mechanisms during melt agglomeration in a rotary processor. Int J Pharm 2005;304:152–64
   PubMed Web of Science ®Google Scholar
• Abberger T, Seo A, Schaefer T. The effect of droplet size and powder particle size on the mechanisms of nucleation and growth in fluid bed melt agglomeration. Int J Pharm 2002;249:185–97
   PubMed Web of Science ®Google Scholar
• Seo A, Holm P, Schaefer T. Effects of droplet size and type of binder on the agglomerate growth mechanisms by melt agglomeration in a fluidised bed. Eur J Pharm Sci 2002;16:95–105
   PubMed Web of Science ®Google Scholar
• Schæfer T, Mathiesen C. Melt pelletization in a high shear mixer. IX. Effects of binder particle size. Int J Pharm 1996;139:139–48
   Web of Science ®Google Scholar
• AnalySIS User’s Guide. Germany: Soft Imaging System GmbH; 1998
   Google Scholar
• Podczeck F, Rahman SR, Newton JM. Evaluation of a standardised procedure to assess the shape of pellets using image analysis. Int J Pharm 1999;192:123–38
   PubMed Web of Science ®Google Scholar
• Bouwman AM, Bosma JC, Vonk P, et al. Which shape factor(s) best describe granules? Powder Technol 2004;146:66–72
   Web of Science ®Google Scholar
• Mašić I, Ilić I, Parojčić J, et al. Fluidized hot melt granulation: an investigation into the influence of process parameters and filler type on granule characteristics and drug dissolution. Proceedings of 3rd Pharmaceutical Sciences Fair and Exhibition; 2011 Jun 13–17; Prague, Czech Republic:54, Abstract book
   Google Scholar
• Qi S, Avalle P, Saklatvala R, Craig DQM. An investigation into the effects of thermal history on the crystallization behaviour of amorphous paracetamol. Eur J Pharm Biopharm 2008;69:364–71
   PubMed Web of Science ®Google Scholar
• Ilić I, Kása P Jr, Dreu R, et al. The compressibility and compactibility of different types of lactose. Drug Dev Ind Pharm 2009;35:1271–80
   PubMed Web of Science ®Google Scholar
• Kirk JH, Dann SE, Blatchford CG. Lactose: a definitive guide to polymorph determination. Int J Pharm 2007;334:103–14
   PubMed Web of Science ®Google Scholar
• Al-Zoubi N, Koundourellis JE, Malamataris S. FT-IR and Raman spectroscopic methods for identification and quantitation of orthorhombic and monoclinic paracetamol in powder mixes. J Pharm Biomed Anal 2002;29:459–67
   PubMed Web of Science ®Google Scholar