The influence of API concentration on the roller compaction process: modeling and prediction of the post compacted ribbon, granule and tablet properties using multivariate data analysis

References

• Kleinebudde P. Roll compaction/dry granulation: pharmaceutical applications. Eur J Pharm Biopharm 2004;58:317–26
   PubMed Web of Science ®Google Scholar
• Hariharan M, Wowchuk C, Nkansah P, Gupta V. Effect of formulation composition on the properties of controlled release tablets prepared by roller compaction. Drug Dev Indus Pharm 2004;30:565–72
   PubMed Web of Science ®Google Scholar
• von Eggelkraut-Gottanka S, Abed S, Müller W, Schmidt P. Roller compaction and tabletting of st. john's wort plant dry extract using a gap width and force controlled roller compactor. II. Study of roller compaction variables on granule and tablet properties by a 33 factorial design. Pharma Dev Technol 2002;7:447–55
   PubMed Web of Science ®Google Scholar
• Rambali B, Baert L, Jans E, Massart D. Influence of the roll compactor parameter settings and the compression pressure on the buccal bio-adhesive tablet properties. Int J Pharm 2001;220:129–40
   PubMed Web of Science ®Google Scholar
• Sheskey P, Pacholke K, Sackett G, et al. Roll compaction granulation of a controlled-release matrix tablet formulation containing HPMC: effect of process scale-up on robustness of tablets and predicted in vivo performance. Pharm Technol 1999;23:6–21
   Google Scholar
• Johanson JR. A rolling theory for granular solids. J Appl Mechan 1965;32:842–8
   Web of Science ®Google Scholar
• Katashinskii VP. Analytical determination of specific pressure during the rolling of metal powders. Powder Metal Met Ceram 1966;5:765–72
   Google Scholar
• Inghelbrecht S, Remon JP, deAguiar PF, et al. Instrumentation of a roll compactor and the evaluation of the parameter settings by neural networks. Int J Pharm 1997;148:103–15
   Web of Science ®Google Scholar
• Falzone A, Peck G, McCabe G. Effects of changes in roller compactor parameters on granulations produced by compaction. Drug Dev Indus Pharm 1992;18:469–89
   Web of Science ®Google Scholar
• am Ende M, Moses S, Carella A, et al. Improving the content uniformity of a low-dose tablet formulation through roller compaction optimization. Pharm Dev Technol 2007;12:391–404
   PubMed Web of Science ®Google Scholar
• Guigon P, Simon O. Roll press design – influence of force feed systems on compaction. Powder Technol 2003;130:41–8
   Web of Science ®Google Scholar
• Inghelbrecht S, Remon J. The roller compaction of different types of lactose. Int J Pharm 1998;166:135–44
   Web of Science ®Google Scholar
• Inghelbrecht S, Remon J, Fernandes de Aguiar P, et al. Instrumentation of a roll compactor and the evaluation of the parameter settings by neural networks. Int J Pharm 1997;148:103–15
   Web of Science ®Google Scholar
• Herting M, Kleinebudde P. Roll compaction/dry granulation: effect of raw material particle size on granule and tablet properties. Int J Pharm 2007;338:110–18
   PubMed Web of Science ®Google Scholar
• Sun CQ, Himmelspach MW. Reduced tabletability of roller compacted granules as a result of granule size enlargement. J Pharm Sci 2006;95:200–6
   PubMed Web of Science ®Google Scholar
• Gupta A, Peck GE, Miller RW, Morris KR. Effect of the variation in the ambient moisture on the compaction behavior of powder undergoing roller-compaction and on the characteristics of tablets produced from the post-milled granules. J Pharm Sci 2005;94:2314–26
   PubMed Web of Science ®Google Scholar
• Gupta A, Peck GE, Miller RW, Morris KR. Influence of ambient moisture on the compaction behavior of microcrystalline cellulose powder undergoing uni-axial compression and roller-compaction: a comparative study using near-infrared spectroscopy. J Pharm Sci 2005;94:2301–13
   PubMed Web of Science ®Google Scholar
• Bacher C, Olsen P, Bertelsen P, et al. Improving the compaction properties of roller compacted calcium carbonate. Int J Pharm 2007;342:115–23
   PubMed Web of Science ®Google Scholar
• Johanson J. A rolling theory for granular solids. J Appl Mech 1965;32:842–8
   Web of Science ®Google Scholar
• Cunningham J, Winstead D, Zavaliangos A. Understanding variation in roller compaction through finite element-based process modeling. Comput Chem Eng 2010;34:1058–71
   Web of Science ®Google Scholar
• Turkoglu M, Aydin I, Murray M, Sakr A. Modeling of a roller-compaction process using neural networks and genetic algorithms. Eur J Pharm Biopharm 1999;48:239–45
   PubMed Web of Science ®Google Scholar
• Mansa R, Bridson R, Greenwood R, et al. Using intelligent software to predict the effects of formulation and processing parameters on roller compaction. Powder Technol 2008;181:217–25
   Web of Science ®Google Scholar
• Chang C, Alvarez-Nunez F, Rinella J, et al. Roller compaction, granulation and capsule product dissolution of drug formulations containing a lactose or mannitol filler, starch, and talc. AAPS PharmSciTech 2008;9:597–604
   PubMed Web of Science ®Google Scholar
• Peter S, Lammens R, Steffens K. Roller compaction/Dry granulation: use of the thin layer model for predicting densities and forces during roller compaction. Powder Technol 2010;199:165–75
   Web of Science ®Google Scholar
• Bro R. Multivariate calibration – what is in chemometrics for the analytical chemist? Anal Chim Acta 2003;500:185–94
   Web of Science ®Google Scholar
• Souihi N, Dumarey M, Wikström H, et al. A quality by design approach to investigate the effect of mannitol and dicalcium phosphate qualities on roll compaction. Int J Pharm 2013;447:47–61
   PubMed Web of Science ®Google Scholar
• Dumarey M, Wikström H, Fransson M, et al. Combining experimental design and orthogonal projections to latent structures to study the influence of microcrystalline cellulose properties on roll compaction. Int J Pharm 2011;416:110–19
   PubMed Web of Science ®Google Scholar
• Andersson M, Folestad S, Gottfries J, et al. Quantitative analysis of film coating in a fluidized bed process by in-line NIR spectrometry and multivariate batch calibration. Anal Chem 2000;72:2099–108
   PubMed Web of Science ®Google Scholar
• Pöllänen K, Häkkinen A, Reinikainen S-P, et al. IR spectroscopy together with multivariate data analysis as a process analytical tool for in-line monitoring of crystallization process and solid-state analysis of crystalline product. J Pharm Biomed Anal 2005;38:275–84
   PubMed Web of Science ®Google Scholar
• Jørgensen A, Rantanen J, Karjalainen M, et al. Hydrate formation during wet granulation studied by spectroscopic methods and multivariate analysis. Pharm Res 2002;19:1285–91
   PubMed Web of Science ®Google Scholar
• Amigo JM, Cruz J, Bautista M, et al. Study of pharmaceutical samples by NIR chemical-image and multivariate analysis. TrAC Trends Anal Chem 2008;27:696–713
   Web of Science ®Google Scholar
• Gupta A, Peck GE, Miller RW, Morris KR. Real-time near-infrared monitoring of content uniformity, moisture content, compact density, tensile strength, and Young's modulus of roller compacted powder blends. J Pharm Sci 2005;94:1589–97
   PubMed Web of Science ®Google Scholar
• Rocksloh K, Rapp FR, Abu Abed S, et al. Optimization of crushing strength and disintegration time of a high-dose plant extract tablet by neural networks. Drug Dev Indus Pharm 1999;25:1015–25
   PubMed Web of Science ®Google Scholar
• Soh J, Boersen N, Carvajal M, et al. Importance of raw material attributes for modeling ribbon and granule properties in roller compaction: multivariate analysis on roll gap and NIR spectral slope as process critical control parameters. J Pharm Innov 2007;2:106–24
   Google Scholar
• Soh J, Wang F, Boersen N, et al. Utility of multivariate analysis in modeling the effects of raw material properties and operating parameters on granule and ribbon properties prepared in roller compaction. Drug Dev Indus Pharm 2008;34:1022–35
   PubMed Web of Science ®Google Scholar
• Boersen N. The development of roller compacted formulations using multivariate and dimensional analysis. West Lafayette (IN): Purdue University; 2010
   Google Scholar
• Bultmann J. Multiple compaction of microcrystalline cellulose in a roller compactor. Eur J Pharm Biopharm 2002;54:59–64
   PubMed Web of Science ®Google Scholar
• Keun H, Ebbels T, Antti H, et al. Improved analysis of multivariate data by variable stability scaling: application to NMR-based metabolic profiling. Anal Chim Acta 2003;490:265–76
   Web of Science ®Google Scholar
• Eriksson L, Johansson E, Kettaneh-Wold N, et al. Mulit- and megavariate data analysis, part i basic principles and applications. Umea, Sweeden: Umetrics; 2006
   Google Scholar
• Zinchuk AV, Mullarney MP, Hancock BC. Simulation of roller compaction using a laboratory scale compaction simulator. Int J Pharm 2004;269:403–15
   PubMed Web of Science ®Google Scholar
• Gamble J, Tobyn M, Dennis A, Shah T. Roller compaction: application of an in-gap ribbon porosity calculation for the optimization of downstream granule flow and compactability characteristics. Pharm Dev Technol 2010;15:223–9
   PubMed Web of Science ®Google Scholar
• Gupta A, Peck GE, Miller RW, Morris KR. Nondestructive measurements of the compact strength and the particle-size distribution after milling of roller compacted powders by near-infrared spectroscopy. J Pharm Sci 2004;93:1047–53
   PubMed Web of Science ®Google Scholar
• Farber L, Hapgood K, Michaels J, et al. Unified compaction curve model for tensile strength of tablets made by roller compaction and direct compression. Int J Pharm 2008;346:17–24
   PubMed Web of Science ®Google Scholar
• Bindhumadhavan G, Seville J, Adams M, et al. Roll compaction of a pharmaceutical excipient: experimental validation of rolling theory for granular solids. Chem Eng Sci 2005;60:3891–7
   Web of Science ®Google Scholar
• Sheskey P, Hendren J. The effects of roll compaction equipment variables, granulation technique, and HPMC polymer level on a controlled-release matrix model drug formulation. Pharm Technol 1999;23:96–106
   Google Scholar
• Weyenberg W, Vermeire A, Vandervoort J, et al. Effects of roller compaction settings on the preparation of bioadhesive granules and ocular minitablets. Eur J Pharm Biopharm 2005;59:527–36
   PubMed Web of Science ®Google Scholar
• Leuenberger H. The application of percolation theory in powder technology. Adv Powder Technol 1999;10:323–52
   Web of Science ®Google Scholar
• Leuenberger H, Ineichen L. Percolation theory and physics of compression. Eur J Pharm Biopharm 1997;44:269–72
   Web of Science ®Google Scholar
• Leuenberger H, Rohera B, Haas C. Percolation theory: a novel approach to solid dosage form design. Int J Pharm 1987;38:109–15
   Web of Science ®Google Scholar
• Holman L, Leuenberger H. The relationship between solid fraction and mechanical-properties of compacts – the percolation theory model approach. Int J Pharm 1988;46:35–44
   Web of Science ®Google Scholar
• Leuenberger H, Leu R. Formation of a tablet – a site and bond percolation phenomenon. J Pharm Sci 1992;81:976–82
   PubMed Web of Science ®Google Scholar
• Leu R, Leuenberger H. The application of percolation theory to the compaction of pharmaceutical powders. Int J Pharm 1993;90:213–19
   Web of Science ®Google Scholar
• Sinko C, Carlson G, Gierer D. The identification of percolation and mechanical thresholds during the compaction of hydroxypropyl methylcellulose: comparison to thresholds determined from out-of-die indentation experiments. Int J Pharm 1995;114:85–93
   Web of Science ®Google Scholar
• Inghelbrecht S, Remon J. Roller compaction and tableting of microcrystalline cellulose/drug mixtures. Int J Pharm 1998;161:215–24
   Web of Science ®Google Scholar