Simulation and evaluation of tablet-coating burst based on finite element method

References

• Lin HL, Lin SY, Lin YK, et al. Release characteristics and in vitro–in vivo correlation of pulsatile pattern for a pulsatile drug delivery system activated by membrane rupture via osmotic pressure and swelling. Eur J Pharm Biopharm 2008;70:289–301.
   PubMed Web of Science ®Google Scholar
• Bussemer T, Dashevsky A, Bodmeier R. A pulsatile drug delivery system based on rupturable coated hard gelatin capsules. J Control Release 2003;93:331–9.
   PubMed Web of Science ®Google Scholar
• Yadav D, Survase S, Kumar N. Dual coating of swellable and rupturable polymers on glipizide loaded MCC pellets for pulsatile delivery: formulation design and in vitro evaluation. Int J Pharm 2011;419:121–30.
   PubMed Web of Science ®Google Scholar
• Efentakis M, Pagoni I, Vlachou M, et al. Dimensional changes, gel layer evolution and drug release studies in hydrophilic matrices loaded with drugs of different solubility. Int J Pharm 2007;339:66–75.
   PubMed Web of Science ®Google Scholar
• Zhang Y, Zhang Z, Wu F. A novel pulsed-release system based on swelling and osmotic pumping mechanism. J Control Release 2003;89:47–55.
   PubMed Web of Science ®Google Scholar
• Abrahmsen-Alami S, Korner A, Nilsson I, et al. New release cell for NMR microimaging of tablets. Swelling and erosion of poly(ethylene oxide). Int J Pharm 2007;342:105–14.
   PubMed Web of Science ®Google Scholar
• Bettini R, Colombo P, Peppas NA. Solubility effects on drug transport through pH-sensitive, swelling-controlled release systems: transport of theophylline and metoclopramide monohydrochloride. J Control Release 1995;37:105–11.
   Web of Science ®Google Scholar
• Huang X, Chestang BL, Brazel CS. Minimization of initial burst in poly(vinyl alcohol) hydrogels by surface extraction and surface-preferential crosslinking. Int J Pharm 2002;248:183–92.
   PubMed Web of Science ®Google Scholar
• Hewlett KO, L'Hote-Gaston J, Radler M, et al. Direct measurement of the time-dependent mechanical response of HPMC and PEO compacts during swelling. Int J Pharm 2012;434: 494–501.
   PubMed Web of Science ®Google Scholar
• Lee JO, Lim JG, Kang IM, et al. Swelling pressures of compacted Ca-bentonite. Eng Geol 2012;129–130:20–26.
   Web of Science ®Google Scholar
• Haddish-Berhane N, Jeong SH, Haghighi K, et al. Modeling film-coat non-uniformity in polymer coated pellets: a stochastic approach. Int J Pharm 2006;323:64–71.
   PubMed Web of Science ®Google Scholar
• Bussemer T, Peppas NA, Bodmeier R. Evaluation of the swelling, hydration and rupturing properties of the swelling layer of a rupturable pulsatile drug delivery system. Eur J Pharm Biopharm 2003;56:261–70.
   PubMed Web of Science ®Google Scholar
• Sungthongjeen S, Sriamornsak P, Puttipipatkhachorn S. Design and evaluation of floating multi-layer coated tablets based on gas formation. Eur J Pharm Biopharm 2008;69:255–63.
   PubMed Web of Science ®Google Scholar
• Slavutsky AM, Bertuzzi MA, Armada M, et al. Preparation and characterization of montmorillonite/brea gum nanocomposites films. Food Hydrocolloid 2014;35:270–8.
   Web of Science ®Google Scholar
• Aksoley ME, Ozcelik B, Bican I. Comparison of bursting pressure results of LPG tank using experimental and finite element method. J Hazard Mater 2008;151:699–709.
   PubMed Web of Science ®Google Scholar
• Momose W, Yoshino H, Katakawa Y, et al. Applying terahertz technology for nondestructive detection of crack initiation in a film-coated layer on a swelling tablet. Results Pharma Sci 2012;2:29–37.
   PubMedGoogle Scholar
• Haddish-Berhane N, Nyquist C, Haghighi K, et al. A multi-scale stochastic drug release model for polymer-coated targeted drug delivery systems. J Control Release 2006;110:314–22.
   PubMed Web of Science ®Google Scholar
• Muliadi AR, Litster JD, Wassgren CR. Validation of 3-D finite element analysis for predicting the density distribution of roll compacted pharmaceutical powder. Powder Technol 2013; 237:386–99.
   Web of Science ®Google Scholar
• Wu CY, Ruddy OM, Bentham AC, et al. Modelling the mechanical behaviour of pharmaceutical powders during compaction. Powder Technol 2005;152:107–17.
   Web of Science ®Google Scholar
• Rachik M, Barthes-Biesel D, Carin M, et al. Identification of the elastic properties of an artificial capsule membrane with the compression test: Effect of thickness. J Colloid Interface Sci 2006;301:217–26.
   PubMed Web of Science ®Google Scholar
• Le DV. Subdivision elements for large deformation of liquid capsules enclosed by thin shells. Comput Method Appl M 2010;199:2622–32.
   Web of Science ®Google Scholar
• Onder A, Sayman O, Dogan T, et al. Burst failure load of composite pressure vessels. Compos Struct 2009;89:159–66.
   Web of Science ®Google Scholar
• Kaptan A, Kisioglu Y. Determination of burst pressures and failure locations of vehicle LPG cylinders. Int J Pres Ves Pip 2007;84:451–9.
   Web of Science ®Google Scholar
• Maurer L, Leuenberger H. Terahertz pulsed imaging and near infrared imaging to monitor the coating process of pharmaceutical tablets. Int J Pharm 2009;370:8–16.
   PubMed Web of Science ®Google Scholar
• Markl D, Hannesschläger G, Sacher S, et al. Optical coherence tomography as a novel tool for in-line monitoring of a pharmaceutical film-coating process. Eur J Pharm Sci 2014;55: 58–67.
   PubMed Web of Science ®Google Scholar
• Oh E, Luner PE. Surface free energy of ethylcellulose films and the influence of plasticizers. Int J Pharm 1999;188:203–19.
   PubMed Web of Science ®Google Scholar
• Altinkaya SA, Yenal H. In vitro drug release rates from asymmetric-membrane tablet coatings, Prediction of phase-inversion dynamics. Biochem Eng J 2006;28:131–9.
   Web of Science ®Google Scholar
• Cole G, Hogan J, Aulton M. Pharmaceutical coating technology. 1995. Translated by Zheng JM. 1st edn. Beijing: Chinese Medicine Science and Technology Press; 2001:289–93.
   Google Scholar
• Kangarlou S, Haririan I, Gholipour Y. Physico-mechanical analysis of free ethyl cellulose films comprised with novel plasticizers of vitamin resources. Int J Pharm 2008;356:153–66.
   PubMed Web of Science ®Google Scholar
• Tarvainen M, Sutinen R, Peltonen S, et al. Enhanced film-forming properties for ethyl cellulose and starch acetate using n-alkenyl succinic anhydrides as novel plasticizers. Eur J Pharm Sci 2003;19:363–71.
   PubMed Web of Science ®Google Scholar
• Ferrari F, Bertoni M, Bonferoni MC, et al. Comparative evaluation of hydrocolloid dressings by means of water uptake and swelling force measurements: II. Int J Pharm 1995;117:49–55.
   Web of Science ®Google Scholar
• Liu J, Williams RO. Properties of heat-humidity cured cellulose acetate phthalate free films. Eur J Pharm Sci 2002;17:31–41.
   PubMed Web of Science ®Google Scholar
• Parikh NH, Porter SC, Rohera BD. Tensile properties of free films cast from aqueous ethylcellulose dispersions. Pharm Res 1993; 10:810–15.
   PubMed Web of Science ®Google Scholar
• Okhamafe AO, York P. Stress crack resistance of some pigmented and unpigmented tablet film coating systems. J Pharm Pharmacol 1985;37:449–54.
   PubMed Web of Science ®Google Scholar
• Bussemer T, Bodmeier R. Formulation parameters affecting the performance of coated gelatin capsules with pulsatile release profiles. Int J Pharm 2003;267:59–68.
   PubMed Web of Science ®Google Scholar
• Kelemen A, Buchholcz G, Sovány T, et al. Evaluation of the swelling behaviour of iota-carrageenan in monolithic matrix tablets. J Pharm Biomed Anal 2015;112:85–8.
   PubMed Web of Science ®Google Scholar