Computer-aided planning of reconstructive surgery of the innominate bone: Automated correction proposals

References

• Paprosky WG, O’Rourke M, Sporer SM. The treatment of acetabular bone defects with an associated pelvic discontinuity. Clin Orthop Relat Res 2005; 441: 216–220
   PubMed Web of Science ®Google Scholar
• Saleh KJ, Kassim R, Gross AE. Bone assessment and reconstruction in revision hip surgery. Am J Orthop 2002; 31(4)183–185
   PubMedGoogle Scholar
• Legal H. Introduction to the biomechanics of the hip. Congenital Dysplasia and Dislocation of the Hip, D Tonnis. Springer, Berlin 1987; 26–57
   Google Scholar
• Steel HH. Triple osteotomy of the innominate bone. J Bone Joint Surg Am 2004; 86-A(3)644
   PubMedGoogle Scholar
• Sutherland DH, Greenfield R. Double innominate osteotomy. J Bone Joint Surg Am 1977; 59(8)1082–1091
   PubMed Web of Science ®Google Scholar
• Verschueren P, Gelaude F, Moens P, Fabry G, Vander Sloten J. Simulation and biomechanical evaluation of reconstructive surgery of the hip in children. Proceedings of the 3rd European Medical and Biological Engineering Conference (EMBEC-05). PragueCzech Republic November, 2005; 11: 2130, IFMBE Proceedings
   Google Scholar
• Haddad FS, Garbuz DS, Duncan CP, Janzen DL, Munk PL. CT evaluation of periacetabular osteotomies. J Bone Joint Surg 2000; 82-B: 526–531
   Google Scholar
• Jacobsen S, Sonne-Holm S, Lund B, Soballe K, Kiaer T, Rovsing H, Monrad H. Pelvic orientation and assessment of hip dysplasia in adults. Acta Orthop Scand 2004; 75(6)721–729
   PubMed Web of Science ®Google Scholar
• Jolles BM, Genoud P, Hoffmeyer P. Computer-assisted cup placement techniques in total hip arthroplasty improve accuracy of placement. Clin Orthop Relat Res 2004; 426: 174–179
   PubMed Web of Science ®Google Scholar
• Stiehl JB, Heck DA, Lazzeri M. Accuracy of acetabular component positioning with a fluoroscopically referenced CAOS system. Comput Aided Surg 2005; 10(5-6)321–327
   PubMedGoogle Scholar
• Van Ham G, Denis K, Vander Sloten J, Van Audekercke R, Van der Perre G, De Schutter J, Simon JP, Fabry G. A semi-active milling procedure in view of preparing implantation beds in robot-assisted orthopaedic surgery. Proc Inst Mech Eng (H) 2005; 219(3)163–174
   PubMedGoogle Scholar
• Christie MJ, Barrington SA, Brinson MF, Ruhling ME, DeBoer DK. Bridging massive acetabular defects with the triflange cup. Clin Orthop Relat Res 2001; 393: 216–227
   PubMed Web of Science ®Google Scholar
• Holt GE, Dennis DA. Use of custom triflanged acetabular components in revision total hip arthroplasty. Clin Orthop Relat Res 2004; 429: 209–214
   PubMedGoogle Scholar
• Gelaude F, Vander Sloten J, Lauwers B. Semi-automated segmentation and visualisation of outer bone cortex from medical images. Comput Methods Biomech Biomed Eng 2006; 9(1)65–77
   PubMedGoogle Scholar
• Gelaude F, Vander Sloten J, Lauwers B. Automated design and production of cranioplasty plates: Outer surface methodology, accuracies and a direct comparison to manual techniques. Computer-Aided Design and Applications 2006; 3(1–4)193–202
   Google Scholar
• Clijmans T, Gelaude F, Abeloos J, Mommaerts M, Suetens P, Vander Sloten J. Integration of application-specificity and automation in computer-aided pre-operative planning of mandibular reconstruction surgery. Int J Comput Assist Radiol Surg 2007; 2(Suppl1)S226–S227
   Google Scholar
• Lorensen WE, Cline HE. Marching Cubes: A high resolution 3D surface construction algorithm. Computer Graphics 1987; 21(4)163–169
   Google Scholar
• Besl P, McKay N. A method for registration of 3-D shapes. IEEE Trans Pattern Anal Machine Intell 1992; 14(2)239–256
   Web of Science ®Google Scholar
• Rusotti GM, Coventry MB, Stauffer RN. Cemented total hip arthroplasty with contemporary techniques. Clin Orthop 1988; 235: 1165
   Google Scholar
• Ritter MA, Keating ME, Faris PM. Metal-backed acetabular cups in total hip arthroplasty. J Bone Joint Surg 1990; 72A: 672
   Web of Science ®Google Scholar
• Bell RS, Schatzker J, Fornasier VL, Goodman SB. A study of implant failure in the Wagner resurfacing arthroplasty. J Bone Joint Surg 1985; 67A: 1165
   Web of Science ®Google Scholar
• Johnson JHT. Reconstruction of the pelvic ring following tumor resection. J Bone Joint Surg 1978; 60A: 747–751
   Google Scholar
• Scales v. Massive bone and joint replacement involving the upper femur, acetabulum and iliac bone in the hip. Proceedings of the Third Open Scientific Meeting of the Hip Society. St. Louis, Mosby 1975; 245–275
   Google Scholar
• Bellabarba C, Berger RA, Bentley CD, Quigley LR. Cementless acetabular reconstruction after acetabular fracture. J Bone Joint Surg 2001; 83-A: 868–876
   PubMedGoogle Scholar
• Berry DJ, Halasy M. Uncemented acetabular components for arthritis after acetabular fractures. Clin Orthop Rel Res 2002; 405: 164–167
   PubMed Web of Science ®Google Scholar
• Höllen IP, Mentzel M, Bischoff M, Kinzl L. Acetabular fractures in elderly persons. Primary endoprosthetic treatment. Orthopäde 1997; 26: 348–353
   PubMed Web of Science ®Google Scholar
• Tidemark J, Blomfeldt R, Ponzer S, Soderqvist A, Tornkvist H. Primary total hip arthroplasty with a Burch-Schneider antiprotrusion cage and autologous bone grafting for acetabular fractures in elderly patients. J Orthop Trauma 2003; 17: 193–197
   PubMed Web of Science ®Google Scholar
• Volkmann R, Maurer F, Eingartner C, Weller S. Primary endoprosthetic hip joint replacement in acetabulum fractures. Unfallchirurgie 1995; 21: 292–297
   PubMedGoogle Scholar
• Romness DW, Lewallen DG. Total hip arthroplasty after fracture of the acetabulum. J Bone Joint Surg 1990; 72-B: 761–764
   Web of Science ®Google Scholar
• Stauffer RN. Ten-year follow-up of total hip replacement with particular reference to röntgenographic loosening of components. J Bone Joint Surg 1982; 64-A: 983–990
   Web of Science ®Google Scholar
• Dennis DA. Management of massive acetabular defects in revision total hip arthroplasty. J Arthroplasty 2003; 18(3 Suppl 1)121–125
   PubMed Web of Science ®Google Scholar
• Duflou JR, Verbert J, Tunckol Y, Gelaude F, Lauwers B (October, 2005) Customised medical implant production by means of Single Point Incremental Forming. Proceedings of the International Conference on Manufacturing Engineering. 2005. Kassandra-Chalkidiki, Greece, 217–226, (ICMEN ‘05)
   Google Scholar
• Impens S, Mullens S, Luyten J, Thijs I, Van Humbeeck J, Van Cleynenbreugel T, Bakker A, Luyten FP, Schrooten J. Production and characterization of CaP en Ti scaffolds for bone tissue engineering. Proceedings of 19th European Conference on Biomaterials. SorrentoItaly September, 2005
   Google Scholar
• Levy GN, Schindel R, Kruth J-P. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies - state of the art and future perspectives. Ann CIRP 2003; 52(2)589–609
   Web of Science ®Google Scholar