References
- Bayne S C, Lautenschlager E P, Compere C L, Wildes R. Degree of polymerization of acrylic bone cement. J Biomed Mater Res 1975; 9(1)27–34
- Burke D W, Gates E I, Harris W H. Centrifugation as a method of improving tensile and fatigue properties of acrylic bone cement. J Bone Joint Surg (Am) 1984; 66(8)1265–73
- Debrunner H U. Untersuchungen zur Porosität von Knochenzementen. Arch Orthop Unfallchir 1976; 86(3)261–78
- Demarest V A, Lautenschlager E P, Wixson R L. Vacuum mixing of acrylic bone cement. 9th Annual Meeting of the Society for Biomaterials, Birmingham, Alabama, 1983
- DeWijn J R. Porous polymethylmethacrylate cement. Thesis, University of Nijmegen. 1982
- Draenert K. 1986, Private communication
- Eyerer P, Jin R. Influence of mixing technique on some properties of PMMA bone cement. J Biomed Mater Res 1986; 20(8)1057–94
- Gates E I, Carter D R, Harris W H. Tensile fatigue failure of acrylic bone cement. J Biomech Eng 1983; 105(4)393–7
- Jasty M, Jensen J F, Burke D W, Harrigan T P, Harris W H. Porosity measurement in commercial bone cement preparation and the effect of centrifugation of porosity reductions. 31st Annual ORS, Las Vegas, 1985
- Keller J C, Lautenschlager E P. Experimental attempts to reduce acrylic cement porosity. Biomater Med Devices Artif Organs 1983; 11(2–3)221–36
- Lidgren L, Drar H, Möller J. Strength of polymethylmethacrylate increased by vacuum mixing. Acta Orthop Scand 1984; 55(5)536–41
- Lidgren L, Bodelind B, Möller J. Bone cement improved by vacuum mixing and chilling. Acta Orthop Scand 1987; 58(1)27–32
- Rimnac C M, Wright T M. The effect of centrifugation on the fracture properties of polymethylmethacrylate bone cement. 31st Annual ORS, Las Vegas, 1985
- Skinner H B, Murray W R. Density gradients in bone cement after centrifugation. 31st Annual ORS, Las Vegas, 1985
- Walters K. Rheometry. Chapman & Hall, London 1975
- Wixson R L, Lautenschlager E P, Novak M A. Vacuum mixing of methylmethacrylate bone cement. 31st Annual ORS, Las Vegas, 1985