References
- AIJ (Architectural Institute of Japan). 2004. Recommendations for loads on buildings. Tokyo.
- AIK (Architectural Institute of Korea). 2000. Standard design loads for buildings. Korea.
- ASCE (American Society of Civil Engineers). 2006. Minimum design loads for building and other structures. ASCE 7-05. New York.
- Baker, W. F. 1990. Sizing techniques for lateral systems in multi-story steel buildings, in Proceedings of 4thWorld Congress on Tall Building: 2000 and Beyond, 5–9 November 1990, Council on Tall Buildings and Urban Habitat (CTBUH), Hong Kong.
- Boggs, D. 1997. Acceleration indexes for human comfort in tall buildings – Peak or RMS?, CTBUH Monograph.
- Cermak, J. E. 2003. Wind-tunnel development and trends in applications to civil engineering, Journal of Wind Engineering and Industrial Aerodynamics91(3): 355–370. http://dx.doi.org/10.1016/S0167-6105(02)00396-3
- Chan, C. M.; Chui, J. K. L. 2006. Wind-induced response and serviceability design optimization of tall steel buildings, Engineering Structures28(4): 503–513. http://dx.doi.org/10.1016/j.engstruct.2005.09.005
- Chan, C. M.; Huang, M. F.; Kwok, K. C. S. 2009. Stiffness optimization for wind-induced dynamic serviceability design of tall buildings, Journal of Structural Engineering ASCE135(8): 985–997. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000036
- Chan, C. M.; Huang, M. F.; Kwok, K. C. S. 2010. Integrated wind load analysis and stiffness optimization of tall buildings with 3D modes, Engineering Structures32(5): 1252–1261. http://dx.doi.org/10.1016/j.engstruct.2010.01.001
- Charney, F. A. 1991. The use of displacement participation factors in the optimization of drift controlled buildings, in Proceedings of 2ndConference on Tall Buildings in Seismic Regions, 55thRegional Conference, 16–17 May 1991, Los Angeles, CA.
- Griffis, L. G. 1993. Serviceability limit states under wind load, Engineering Journal AISC30(1): 1–16.
- ISO 6897: 1984 Guidelines for the fixed structures, especially buildings and off-shore structures to low-frequency horizontal motion (0.063 to 1 Hz). International Organization for Standardization.
- Kareem, A.; Kijewski, T.; Tamura, Y. 1999. Mitigation of motions of tall buildings with specific examples of recent applications, Wind and Structures2(3): 201–251. http://dx.doi.org/10.12989/was.1999.2.3.201
- KCI (Korea Concrete Institute). 2003. Structural Concrete Design Code. Korea.
- Kijewski, T.; Kareem, A. 1998. Dynamic wind effects: a comparative study of provisions in codes and standards with wind tunnel data, Wind and Structures1(1): 77–109. http://dx.doi.org/10.12989/was.1998.1.1.077
- Kijewski, T.; Pirnia, J. D. 2007. Dynamic behavior of tall buildings under wind: insights from full-scale monitoring, The Structural Design of Tall and Special Buildings16(4):471–486. http://dx.doi.org/10.1002/tal.415
- Kim, Y. C.; Kanda, J. 2008. Wind response characteristics for habitability of tall buildings in Japan, The Structural Design of Tall and Special Buildings17(3): 683–718. http://dx.doi.org/10.1002/tal.373
- Lee, K.; Ricles, J.; Sause, R. 2009. Performance-based seismic design of steel MRFs with elastomeric dampers, Journal of Structural Engineering ASCE135(5): 489–498. http://dx.doi.org/10.1061/(ASCE)0733-9445(2009)135:5(489)
- Lewandowski, R.; Grzymislawska, J. 2009. Dynamic analysis of structures with multiple tuned mass dampers, Journal of Civil Engineering and Management15(1): 77–86. http://dx.doi.org/10.3846/1392-3730.2009.15.77-86
- Li, Q. S.; Zou, X. K.; Wu, J. R.; Wang, Q. 2011. Integrated wind-induced response analysis and design optimization of tall steel buildings using Micro-GA, The Structural Design of Tall and Special Buildings20(8): 951–971. http://dx.doi.org/10.1002/tal.569
- Marshall, J. D.; Charney, F. A. 2012. Seismic response of steel frame structures with hybrid passive control systems, Earthquake Engineering and Structural Dynamics41(4): 715–733. http://dx.doi.org/10.1002/eqe.1153
- MIDAS/Gen Program 2012. MIDAS/Gen-General structure design system [online], [cited 17 April 2012]. MIDAS Information Technology, Co., Ltd. Available from Internet: http://www.midasit.com
- NBCC (National Building Code of Canada). 1995. National building code of Canada (NBCC), Part 4 and Commentary C. Ottawa.
- Park, H. S.; Park, C. L. 1997. Drift control of high-rise buildings with unit load method, The Structural Design of Tall and Special Buildings6(3): 23–25. http://dx.doi.org/10.1002/(SICI)1099-1794(199703)6:1<23::AID-TAL80>3.0.CO;2-1
- Park, H. S.; Seo, J. H.; Kwon, Y. H. 2008. Development of drift design model for high-rise buildings subjected to lateral and vertical loads, The Structural Design of Tall and Special Buildings17(2): 273–293. http://dx.doi.org/10.1002/tal.351
- Patil, V. B.; Jangid, R. S. 2011. Optimum multiple tuned mass dampers for the wind excited benchmark building, Journal of Civil Engineering and Management17(4): 540–557. http://dx.doi.org/10.3846/13923730.2011.619325
- Petrini, F.; Ciampoli, M. 2012. Performance-based wind design of tall buildings, Structure and Infrastructure Engineering8(10): 954–966.
- Sayani, P. J.; Erduran, E.; Ryan, K. L. 2011. Comparative response assessment of minimally compliant low-Rise base-isolated and conventional steel moment-resisting frame buildings, Journal of Structural Engineering ASCE137(10): 1118–1131. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000358
- Seo, J. H.; Song, W.; Kwon, Y. H.; Hong, K.; Park, H. S. 2008. Drift design model for high-rise buildings based on resizing algorithm with a weight control factor, The Structural Design of Tall and Special Buildings17(3): 563–578. http://dx.doi.org/10.1002/tal.366
- Solari, G. 1982. Alongwind response estimation: closed form solution, Journal of Structural Division ASCE108(1): 225–244.
- Taflanidis, A. A.; Jia, G. 2011. A simulation-based framework for risk assessment and probabilistic sensitivity analysis of base-isolated structures, Earthquake Engineering and Structural Dynamics40(14): 1629–1651. http://dx.doi.org/10.1002/eqe.1113
- Tallin, A.; Ellingwood, B. 1984. Serviceability limit states: wind induced vibrations, Journal of Structural Engineering ASCE110(10): 2424–2437. http://dx.doi.org/10.1061/(ASCE)0733-9445(1984)110:10(2424)
- Tschanz, T.; Davenport, A.G. 1983. The base balance technique for the determination of dynamic wind loads, Journal of Wind Engineering and Industrial Aerodynamics13(1–3): 429–439. http://dx.doi.org/10.1016/0167-6105(83)90162-9