About this journal
Aims and scope
Aims & Scope
The Journal of Medical Engineering & Technology is an international, independent and interdisciplinary journal which aims to provide a broad perspective on engineering and technology in the medical setting, including an understanding of the physiological processes underlying disease and disability.
The Journal covers the following areas:
- Clinical diagnostic technologies (hardware and software, including application of AI to medical images and physiological data)
- Musculoskeletal and rehabilitation engineering (including biomechanics, prosthetics, orthotics and assistive technologies)
- Cardiovascular engineering (including interventional and implantable devices, modelling and simulation)
- Medical device development and innovation (including modelling and simulation, apps, telemedicine, and 3D printing of devices)
- Medical equipment management (including regulatory compliance, waste, sustainability, maintenance, calibration and cyber security)
Features include authoritative review papers, reports of original research, and evaluation reports on new and existing techniques and devices. Innovation papers provide a wide range of topics covering medical engineering in healthcare from concept to clinic, and the journal publishes tutorials to promote a broad base of information and knowledge. Each issue of the journal contains a comprehensive information service which provides news relevant to the world of medical engineering and technology, details of new products, and selected contents of related journals.
The Journal of Medical Engineering & Technology also publishes thematic special issues that focus on topics of importance.
Authors can choose to publish gold open access in this journal.
Journal metrics
Usage
- 60K annual downloads/views
Citation metrics
- 4.6 (2023) CiteScore (Scopus)
- Q2 CiteScore Best Quartile
- 0.769 (2023) SNIP
- 0.377 (2023) SJR
Speed/acceptance
- 34 days avg. from submission to first decision
- 126 days avg. from submission to first post-review decision
- 22 days avg. from acceptance to online publication
- 3% acceptance rate
Understanding and using journal metrics
Journal metrics can be a useful tool for readers, as well as for authors who are deciding where to submit their next manuscript for publication. However, any one metric only tells a part of the story of a journal’s quality and impact. Each metric has its limitations which means that it should never be considered in isolation, and metrics should be used to support and not replace qualitative review.
We strongly recommend that you always use a number of metrics, alongside other qualitative factors such as a journal’s aims & scope, its readership, and a review of past content published in the journal. In addition, a single article should always be assessed on its own merits and never based on the metrics of the journal it was published in.
For more details, please read the Author Services guide to understanding journal metrics.
Journal metrics in brief
Usage and acceptance rate data above are for the last full calendar year and are updated annually in February. Speed data is updated every six months, based on the prior six months. Citation metrics are updated annually mid-year. Please note that some journals do not display all of the following metrics (find out why).
- Usage: the total number of times articles in the journal were viewed by users of Taylor & Francis Online in the previous calendar year, rounded to the nearest thousand.
Citation Metrics
- Impact Factor*: the average number of citations received by articles published in the journal within a two-year window. Only journals in the Clarivate Science Citation Index Expanded (SCIE), Social Sciences Citation Index (SSCI), Arts and Humanities Citation Index (AHCI) and the Emerging Sources Citation Index (ESCI) have an Impact Factor.
- Impact Factor Best Quartile*: the journal’s highest subject category ranking in the Journal Citation Reports. Q1 = 25% of journals with the highest Impact Factors.
- 5 Year Impact Factor*: the average number of citations received by articles in the journal within a five-year window.
- CiteScore (Scopus)†: the average number of citations received by articles in the journal over a four-year period.
- CiteScore Best Quartile†: the journal’s highest CiteScore ranking in a Scopus subject category. Q1 = 25% of journals with the highest CiteScores.
- SNIP (Source Normalized Impact per Paper): the number of citations per paper in the journal, divided by citation potential in the field.
- SJR (Scimago Journal Rank): Average number of (weighted) citations in one year, divided by the number of articles published in the journal in the previous three years.
Speed/acceptance
- From submission to first decision: the average (median) number of days for a manuscript submitted to the journal to receive a first decision. Based on manuscripts receiving a first decision in the last six months.
- From submission to first post-review decision: the average (median) number of days for a manuscript submitted to the journal to receive a first decision if it is sent out for peer review. Based on manuscripts receiving a post-review first decision in the last six months.
- From acceptance to online publication: the average (median) number of days from acceptance of a manuscript to online publication of the Version of Record. Based on articles published in the last six months.
- Acceptance rate: articles accepted for publication by the journal in the previous calendar year as percentage of all papers receiving a final decision.
For more details on the data above, please read the Author Services guide to understanding journal metrics.
*Copyright: Journal Citation Reports®, Clarivate Analytics
†Copyright: CiteScore™, Scopus
Editorial board
Editor-in-Chief
Dr Rhys Morris - Department of Medical Physics & Clinical Engineering, University Hospital of Wales, Heath Park, Cardiff, CF14 4XW, UK
Editor Emeritus
Professor John P. Woodcock - Department of Medical Physics & Clinical Engineering, University Hospital of Wales, Heath Park, Cardiff, CF14 4XW, UK
Associate Editors
Dr John W. Fenner - News and Product Update Editor - Department of Medical Physics & Clinical Engineering, University of Sheffield, Royal Hallamshire Hospital, Glossop Road, Sheffield, S10 2JF, UK
Dr Patricia V. Lawford - Selected Contents & Book Reviews Editor - Department of Medical Physics & Clinical Engineering, University of Sheffield, Royal Hallamshire Hospital, Glossop Road, Sheffield, S10 2JF, UK
Editorial Board
Professor Sharmila Ashok - Vellore Institute of Technology, India
Professor Mahdi Bodaghi - Nottingham Trent University, UK
Professor Poonam Chaudhary - The NorthCap University, India
Professor Tony Easty - Toronto General Hospital, Canada
Mr Rob Heggie - The National Hospital for Neurology and Neurosurgery, UK
Associate Professor Ean Hin Ooi - Monash University Malaysia, Malaysia
Dr Dimitri Parthimos - Welsh Heart Research Institute, UK
Professor Anurag Srivastava - All India Institute of Medical Sciences, India
Professor Ian Swain - Salisbury NHS Foundation Trust, UK
Dr Peter Theobald - Cardiff University, UK
Professor M. A. Tooley - Royal United Hospital, UK
Professor Ali Bulent Usakli - KTO Karatay University, Turkey
Open access
Journal of Medical Engineering & Technology is a hybrid open access journal that is part of our Open Select publishing program, giving you the option to publish open access. Publishing open access means that your article will be free to access online immediately on publication, increasing the visibility, readership, and impact of your research.
Why choose open access?
- Increase the discoverability and readership of your article
- Make an impact and reach new readers, not just those with easy access to a research library
- Freely share your work with anyone, anywhere
- Comply with funding mandates and meet the requirements of your institution, employer or funder
- Rigorous peer review for every open access article
Article Publishing Charges (APC)
If you choose to publish open access in this journal you may be asked to pay an Article Publishing Charge (APC). You may be able to publish your article at no cost to yourself or with a reduced APC if your institution or research funder has an open access agreement or membership with Taylor & Francis.
Use our APC finder to calculate your article publishing charge
News, offers and calls for papers
News and offers
- Indexed in Scopus CitesScore and MEDLINE
8 issues per year
Advertising information
Would you like to advertise in Journal of Medical Engineering & Technology?
Reach an engaged target audience and position your brand alongside authoritative peer-reviewed research by advertising in Journal of Medical Engineering & Technology.
Taylor & Francis make every effort to ensure the accuracy of all the information (the "Content") contained in our publications. However, Taylor & Francis, our agents (including the editor, any member of the editorial team or editorial board, and any guest editors), and our licensors, make no representations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of the Content. Any opinions and views expressed in this publication are the opinions and views of the authors, and are not the views of or endorsed by Taylor & Francis. The accuracy of the Content should not be relied upon and should be independently verified with primary sources of information. Taylor & Francis shall not be liable for any losses, actions, claims, proceedings, demands, costs, expenses, damages, and other liabilities whatsoever or howsoever caused arising directly or indirectly in connection with, in relation to, or arising out of the use of the Content. Terms & Conditions of access and use can be found at http://www.tandfonline.com/page/terms-and-conditions .
Ready to submit?
Start a new submission or continue a submission in progress
Go to submission site (link opens in a new window) Instructions for authors