Citations (74)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (16)
Fatima Zohra Messabih, Mohamed Mokhtari, Mohamed Bentoumi, Amir Slamene, Elamine Abdelouahed, Habib Benzaama, Achwak Ghomari & Youcef Merasli. (2023) Nonlinear CZM-based predictive analysis of damage in single-lap composite joints: An exploration of the FGM concept in Fiber–Matrix coupling. Mechanics of Advanced Materials and Structures 0:0, pages 1-11.
Read now
Read now
Elamine Abdelouahed, Mohamed Mokhtari, Benzaama Habib, Ilias-Mohammed-Amine Ghermaoui, Mohammed-Chams-Eddine Ezzine, Achwak Ghomari & Youcef Merasli. (2023) Using a non-linear mixed model behavior of CZM to predict the damage in single lap bonded joint with Bi-composite graded materials. Mechanics of Advanced Materials and Structures 0:0, pages 1-15.
Read now
Read now
Yang Xue, Hiro Tanaka & Yoji Shibutani. (2023) Shape optimization of adhesives of multi-materials under multiaxial stress failure criteria. The Journal of Adhesion 99:4, pages 558-583.
Read now
Read now
Armin Yousefi Kanani, Sarah Green, Xiaonan Hou & Jianqiao Ye. (2021) Hybrid and adhesively bonded joints with dissimilar adherends: a critical review. Journal of Adhesion Science and Technology 35:17, pages 1821-1859.
Read now
Read now
Jing-Xin Na, Guang-Bin Wang, Wen-Long Mu, Wei Tan, Jun-Dong Ji & Jian-Ze Luan. (2021) Study on the fracture failure criteria for bonded structures considering temperature sensitivity. Journal of Adhesion Science and Technology 35:3, pages 269-295.
Read now
Read now
M. R. Gheibi, M. H. Shojaeefard & H. Saeidi Googarchin. (2019) Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints. The Journal of Adhesion 95:10, pages 943-970.
Read now
Read now
Makoto Imanaka, Masaki Omiya & Noriaki Taguchi. (2019) Estimation of static strength of adhesively bonded single lap joints with an acrylic adhesive under tensile shear condition based on cohesive zone model. Journal of Adhesion Science and Technology 33:6, pages 660-674.
Read now
Read now
Özkan Öz & Halil Özer. (2017) An experimental investigation on the failure loads of the mono and bi-adhesive joints. Journal of Adhesion Science and Technology 31:19-20, pages 2251-2270.
Read now
Read now
M. D. Banea, L. F. M. da Silva, R. J. C. Carbas & S. de Barros. (2017) Debonding on command of multi-material adhesive joints. The Journal of Adhesion 93:10, pages 756-770.
Read now
Read now
D. E. Mouzakis, P. J. Charitidis & G. C. Papanicolaou. (2015) Analytical and numerical investigation of bending moment coefficient in unbalanced single lap joints. Plastics, Rubber and Composites 44:10, pages 413-422.
Read now
Read now
Abolfazl Tutunchi, Rahman Kamali & Abbas Kianvash. (2015) Steel-Epoxy Composite Joints Bonded with Nano-TiO2 Reinforced Structural Acrylic Adhesive. The Journal of Adhesion 91:9, pages 663-676.
Read now
Read now
A.M. G. Pinto, N.F. Q. R. Ribeiro, R.D. S. G. Campilho & I.R. Mendes. (2014) Effect of Adherend Recessing on the Tensile Strength of Single Lap Joints. The Journal of Adhesion 90:8, pages 649-666.
Read now
Read now
A.M.G. Pinto, R.D.S.G. Campilho, I.R. Mendes & A.P.M. Baptista. (2014) Strap repairs using embedded patches: numerical analysis and experimental results. Journal of Adhesion Science and Technology 28:14-15, pages 1530-1544.
Read now
Read now
A.M. G. Pinto, R.D. S. G. Campilho, I.R. Mendes & A.P. M. Baptista. (2014) Numerical and Experimental Analysis of Balanced and Unbalanced Adhesive Single-Lap Joints between Aluminium Adherends. The Journal of Adhesion 90:1, pages 89-103.
Read now
Read now
R.D. S. G. Campilho, M.D. Banea, J.A. B. P. Neto & L.F. M. da Silva. (2012) Modelling of Single-Lap Joints Using Cohesive Zone Models: Effect of the Cohesive Parameters on the Output of the Simulations. The Journal of Adhesion 88:4-6, pages 513-533.
Read now
Read now
R. D. S. G. Campilho,
A. M. G. Pinto,
M. D. Banea,
R. F. Silva & L. F. M. da Silva. (2011) Strength Improvement of Adhesively-Bonded Joints Using a Reverse-Bent Geometry. Journal of Adhesion Science and Technology 25:18, pages 2351-2368.
Read now
Read now
Articles from other publishers (58)
Ishan Manoj, Adarsh Kumar Shah & Atul Jain. (2024) Strength and failure assessments of 3D printed PLA single lap joints: Experimental and numerical analysis. Engineering Failure Analysis 161, pages 108257.
Crossref
Crossref
Yang XUE & Yoji SHIBUTANI. (2024) Evaluation of plastic formability of layered metal sheets bonded by adhesives using conical cup testing. Mechanical Engineering Journal 11:2, pages 23-00455-23-00455.
Crossref
Crossref
Kaan Nuhoğlu, Engin Aktaş, Metin Tanoğlu, Seçkin Martin, Hande İplikçi, Murat Barisik, Melisa Yeke, Ceren Türkdoğan, Gözde Esenoğlu, Serkan Dehneliler & Mehmet Erdem İriş. (2023) Analysis of adhesively bonded joints of laser surface treated composite primary components of aircraft structures. International Journal of Adhesion and Adhesives 126, pages 103456.
Crossref
Crossref
Hanming Yang, Chenqi Zou, Minfei Huang, Mengyan Zang & Shunhua Chen. (2023) High-fidelity computational modeling of scratch damage in automotive coatings with machine learning-driven identification of fracture parameters. Composite Structures 316, pages 117027.
Crossref
Crossref
Engin Erbayrak, Beril Eker Gumus & Ercument Ugur Yuncuoglu. (2023) Experimental study of adhesively bonded joints with dissimilar composite laminates under different loading rates and ambient temperatures. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:5.
Crossref
Crossref
George C. Papanicolaou, Lykourgos C. Kontaxis, Nikolaos Kouris & Diana V. Portan. (2023) Application of an Eco-Friendly Adhesive and Electrochemical Nanostructuring for Joining of Aluminum A1050 Plates. Materials 16:6, pages 2428.
Crossref
Crossref
A.F.M.V. Silva, L.M.C. Peres, R.D.S.G. Campilho, R.J.B. Rocha & F.J.G. Silva. (2022) Cohesive zone parametric analysis in the tensile impact strength of tubular adhesive joints. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237:1, pages 26-37.
Crossref
Crossref
A Karimzadeh, S S R Koloor, M Petrů, MR Ayatollahi & MY Yahya. (2022) Damage characterization of dental nanocomposite adhesive in orthodontic treatment applications. International Journal of Damage Mechanics 31:9, pages 1299-1319.
Crossref
Crossref
Özkan Özbek & Mehmet Veysel Çakır. (2022) MWCNT and nano-silica hybrids effect on mechanical and fracture characterization of single lap joints of GFRP plates. International Journal of Adhesion and Adhesives 117, pages 103159.
Crossref
Crossref
Guangyong Sun, Yang Wei, Xintao Huo, Quantian Luo & Qing Li. (2022) On quasi-static large deflection of single lap joints under transverse loading. Thin-Walled Structures 170, pages 108572.
Crossref
Crossref
Eduardo André Sousa Marques, Ricardo João Camilo Carbas, Alireza Akhavan-Safar & Lucas Filipe Martins da Silva. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers
37
57
.
Alireza Akhavan-Safar, Joao Monteiro, Ricardo Carbas, Eduardo Marques, Rakesh Kumar Goyal & Lucas da Silva. (2020) A modified degradation technique for fatigue life assessment of adhesive materials subjected to cyclic shear loads. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:3, pages 550-559.
Crossref
Crossref
Armin Yousefi Kanani, Xiaonan Hou, Rachael Laidlaw & Jianqiao Ye. (2021) The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints. Engineering Structures 226, pages 111322.
Crossref
Crossref
Alireza Akhavan-Safar, Eduardo A.S. Marques, Ricardo J.C. Carbas & Lucas F.M. da Silva. 2021. Advanced Joining Processes. Advanced Joining Processes
319
351
.
João Pedro Reis, Marcelo de Moura & Sylwester Samborski. (2020) Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review. Materials 13:24, pages 5832.
Crossref
Crossref
Yu SEKIGUCHI. (2020) Cohesive Zone Model（ CZM） for Numerical Analysis: A Review数値解析のための結合力モデル. Journal of The Adhesion Society of Japan 56:11, pages 447-455.
Crossref
Crossref
Armin Yousefi Kanani, Xiaonan Hou & Jianqiao Ye. (2020) A novel dissimilar single-lap joint with interfacial stiffness improvement. Composite Structures 252, pages 112741.
Crossref
Crossref
C. E. Cruz-G, A. Akhavan-Safar, L. F. M da Silva & M. R. Ayatollahi. (2020) On the evaluation of a critical distance approach for failure load prediction of adhesively bonded dissimilar materials. Continuum Mechanics and Thermodynamics 32:6, pages 1647-1657.
Crossref
Crossref
A Akhavan-Safar, J Monteiro, R Carbas, E Marques, R Goyal & LFM da Silva. (2020) Tensile fatigue life prediction of adhesively bonded structures based on CZM technique and a modified degradation approach. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 234:13, pages 1988-1999.
Crossref
Crossref
Armin Yousefi Kanani, Yiding Liu, Darren J. Hughes, Jianqiao Ye & Xiaonan Hou. (2020) Fracture mechanisms of hybrid adhesive bonded joints: Effects of the stiffness of constituents. International Journal of Adhesion and Adhesives 102, pages 102649.
Crossref
Crossref
M. Lißner, B. Erice, E. Alabort, D. Thomson, H. Cui, C. Kaboglu, B.R.K. Blackman, M. Gude & N. Petrinic. (2020) Multi-material adhesively bonded structures: Characterisation and modelling of their rate-dependent performance. Composites Part B: Engineering 195, pages 108077.
Crossref
Crossref
Nawres J Al-Ramahi, Roberts Joffe & Janis Varna. (2020) Numerical stress analysis for single-lap adhesive joint under thermo-mechanical load using non-linear material. IOP Conference Series: Materials Science and Engineering 881:1, pages 012070.
Crossref
Crossref
Hyeonil Park, Se-Jong Kim, Jinwoo Lee, Ji Hoon Kim & Daeyong Kim. (2020) Delamination behavior analysis of steel/polymer/steel high-strength laminated sheets in a V-die bending test. International Journal of Mechanical Sciences 173, pages 105430.
Crossref
Crossref
Yu BaiChengyu Qiu. (2020) Load-Dependent Composite Action for Beam Nonlinear and Ductile Behavior. Journal of Structural Engineering 146:4.
Crossref
Crossref
Maria Lißner, Enrique Alabort, Borja Erice, Hao Cui, Bamber R. K. Blackman & Nik Petrinic. (2020) On the dynamic response of adhesively bonded structures. International Journal of Impact Engineering 138, pages 103479.
Crossref
Crossref
Ibrahim Alachek, Nadège Reboul & Bruno Jurkiewiez. (2020) Experimental and finite element analysis of push-out shear test for adhesive joints between pultruded GFRP and concrete. International Journal of Adhesion and Adhesives 98, pages 102552.
Crossref
Crossref
J.P.A. Valente, R.D.S.G. Campilho, E.A.S. Marques, J.J.M. Machado & Lucas F.M. da Silva. (2020) Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modelling. International Journal of Adhesion and Adhesives 97, pages 102492.
Crossref
Crossref
Anna Rudawska. (2019) Comparison of the adhesive joints’ strength of the similar and dissimilar systems of metal alloy/polymer composite. Applied Adhesion Science 7:1.
Crossref
Crossref
Z. Emami Geiglou & T.N. Chakherlou. (2019) Numerical and experimental investigation of the effect of the cold expansion process on the fatigue behavior of hybrid (bonded-bolted) double shear lap aluminum joints. International Journal of Fatigue 126, pages 30-43.
Crossref
Crossref
Masato IIMORI, Yoji SHIBUTANI, Hiro TANAKA & Yang LIU. (2019) Shape optimization analysis of adhesive interface under multiaxial stress state using failure function with stress invariants不変量破損則に基づく多軸応力場での接着界面形状最適化. Transactions of the JSME (in Japanese) 85:870, pages 18-00409-18-00409.
Crossref
Crossref
Eduardo André de Sousa Marques, Alireza Akhavan-Safar, Raul Duarte Salgueiral Gomes Campilho, Ricardo João Camilo Carbas & Lucas Filipe Martins da Silva. 2019. State of the Art and Future Trends in Material Modeling. State of the Art and Future Trends in Material Modeling
211
244
.
Nawres J. Al-Ramahi, Roberts Joffe & Janis Varna. (2018) Investigation of end and edge effects on results of numerical simulation of single lap adhesive joint with non-linear materials. International Journal of Adhesion and Adhesives 87, pages 191-204.
Crossref
Crossref
Jingxin Na, Wenlong Mu, Guofeng Qin, Wei Tan & Leixin Pu. (2018) Effect of temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints in the automotive industry. International Journal of Adhesion and Adhesives 85, pages 138-148.
Crossref
Crossref
Guangyong Sun, Xinglong Liu, Gang Zheng, Zhihui Gong & Qing Li. (2018) On fracture characteristics of adhesive joints with dissimilar materials – An experimental study using digital image correlation (DIC) technique. Composite Structures 201, pages 1056-1075.
Crossref
Crossref
J.J.M. Machado, E.A.S. Marques, M.R.G. Silva & Lucas F.M. da Silva. (2018) Numerical study of impact behaviour of mixed adhesive single lap joints for the automotive industry. International Journal of Adhesion and Adhesives 84, pages 92-100.
Crossref
Crossref
Iordanis T Masmanidis & Theodore P Philippidis. (2017) Modeling the progressive failure of scarf joints for wind turbine blade repair. Journal of Composite Materials 52:16, pages 2243-2254.
Crossref
Crossref
J.J.M. Machado, P.M.-R. Gamarra, E.A.S. Marques & Lucas F.M. da Silva. (2018) Improvement in impact strength of composite joints for the automotive industry. Composites Part B: Engineering 138, pages 243-255.
Crossref
Crossref
J.J.M. Machado, P.M-R. Gamarra, E.A.S. Marques & Lucas F.M. da Silva. (2018) Numerical study of the behaviour of composite mixed adhesive joints under impact strength for the automotive industry. Composite Structures 185, pages 373-380.
Crossref
Crossref
Masato IIMORI, Hiro TANAKA, Mayuko KIMURA, Yoji SHIBUTANI & Yang LIU. (2018) Simple evaluation method of adhesive failure criterion in multiaxial stress states by uniaxial tensile tests. Mechanical Engineering Journal 5:1, pages 17-00577-17-00577.
Crossref
Crossref
A. Akhavan-Safar, L.F.M. da Silva & M.R. Ayatollahi. (2017) An investigation on the strength of single lap adhesive joints with a wide range of materials and dimensions using a critical distance approach. International Journal of Adhesion and Adhesives 78, pages 248-255.
Crossref
Crossref
T.F. Santos & R.D.S.G. Campilho. (2017) Numerical modelling of adhesively-bonded double-lap joints by the eXtended Finite Element Method. Finite Elements in Analysis and Design 133, pages 1-9.
Crossref
Crossref
Agustín Chiminelli, Rubén Breto, Salvador Izquierdo, Luca Bergamasco, Emmanuel Duvivier & Miguel Lizaranzu. (2017) Analysis of mixed adhesive joints considering the compaction process. International Journal of Adhesion and Adhesives 76, pages 3-10.
Crossref
Crossref
R. Avendaño, R. J. C. Carbas, F. J. P. Chaves, M. Costa, L. F. M. da Silva & A. A. Fernandes. (2016) Impact Loading of Single Lap Joints of Dissimilar Lightweight Adherends Bonded With a Crash-Resistant Epoxy Adhesive. Journal of Engineering Materials and Technology 138:4.
Crossref
Crossref
V. Anes, R. Pedro, E. Henriques, M. Freitas & L. Reis. (2016) Bonded joints of dissimilar adherends at very low temperatures - An adhesive selection approach. Theoretical and Applied Fracture Mechanics 85, pages 99-112.
Crossref
Crossref
R. Avendaño, R.J.C. Carbas, E.A.S. Marques, L.F.M. da Silva & A.A. Fernandes. (2016) Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive. Composite Structures 152, pages 34-44.
Crossref
Crossref
M. R. G. Silva, E. A. S. Marques & Lucas. F. M. da Silva. (2016) Behaviour under Impact of Mixed Adhesive Joints for the Automotive Industry. Latin American Journal of Solids and Structures 13:5, pages 835-853.
Crossref
Crossref
S. Abrate, J. F. Ferrero & P. Navarro. (2015) Cohesive zone models and impact damage predictions for composite structures. Meccanica 50:10, pages 2587-2620.
Crossref
Crossref
Gabriele Cricrì, Michele Perrella, Salvatore Sessa & Nunziante Valoroso. (2015) A novel fixture for measuring mode III toughness of bonded assemblies. Engineering Fracture Mechanics 138, pages 1-18.
Crossref
Crossref
Zhe Min Jia, Guo Qing Yuan & David Hui. (2014) Research Progress on Finite Element Analysis Methods for Bonded Joints at Different Strain Rates. Advanced Materials Research 1049-1050, pages 892-900.
Crossref
Crossref
R.M.R.P. Fernandes, J.A.G. Chousal, M.F.S.F. de Moura & J. Xavier. (2013) Determination of cohesive laws of composite bonded joints under mode II loading. Composites Part B: Engineering 52, pages 269-274.
Crossref
Crossref
Sanne Sulejmani, Camille Sonnenfeld, Thomas Geernaert, Geert Luyckx, Danny Van Hemelrijck, Pawel Mergo, Waclaw Urbanczyk, Karima Chah, Christophe Caucheteur, Patrice Mégret, Hugo Thienpont & Francis Berghmans. (2013) Shear stress sensing with Bragg grating-based sensors in microstructured optical fibers. Optics Express 21:17, pages 20404.
Crossref
Crossref
R.D.S.G. Campilho, M.D. Banea, J.A.B.P. Neto & L.F.M. da Silva. (2013) Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer. International Journal of Adhesion and Adhesives 44, pages 48-56.
Crossref
Crossref
R.D.S.G. Campilho, D.C. Moura, D.J.S. Gonçalves, J.F.M.G. da Silva, M.D. Banea & L.F.M. da Silva. (2013) Fracture toughness determination of adhesive and co-cured joints in natural fibre composites. Composites Part B: Engineering 50, pages 120-126.
Crossref
Crossref
P. Hu, X. Han, L.F.M. da Silva & W.D. Li. (2013) Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model. International Journal of Adhesion and Adhesives 41, pages 6-15.
Crossref
Crossref
R.D.S.G. Campilho, D.C. Moura & D.J.S. Gonçalves. (2013) Adhesive joints in natural fibre composites: estimation of fracture properties. Ciência & Tecnologia dos Materiais 25:1, pages 31-37.
Crossref
Crossref
R.D.S.G. Campilho, A.M.G. Pinto, M.D. Banea & L.F.M. da Silva. (2012) Optimization study of hybrid spot-welded/bonded single-lap joints. International Journal of Adhesion and Adhesives 37, pages 86-95.
Crossref
Crossref
Lucas Filipe Martins da Silva & Raul D. S. G. CampilhoLucas F. M. da Silva & Raul D. S. G. Campilho. 2012. Advances in Numerical Modeling of Adhesive Joints. Advances in Numerical Modeling of Adhesive Joints
1
93
.
A.M.G. Pinto, R.D.S.G. Campilho, I.R. Mendes, S.M. Aires & A.P.M. Baptista. (2011) Effect of hole drilling at the overlap on the strength of single-lap joints. International Journal of Adhesion and Adhesives 31:5, pages 380-387.
Crossref
Crossref