Advanced search
Publication Cover
Journal of Quality Technology
A Quarterly Journal of Methods, Applications and Related Topics
Volume 23, 1991 - Issue 1
Submit an article Journal homepage
43
Views
423
CrossRef citations to date
0
Altmetric
Articles

The Taguchi Capability Index

Russell A. BoylesPrecision Castparts Corp., Portland, Oregon97206View further author information
Pages 17-26 | Published online: 21 Feb 2018

Citations (423)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (176)

Hamideh Iranmanesh, Mehdi Jabbari Nooghabi & Abbas Parchami. (2024) Robust yield test for a normal production process. Quality Engineering 36:2, pages 273-286.
Read now
Chien-Wei Wu, Armin Darmawan & Shih-Wen Liu. (2023) Stage-independent multiple sampling plan by variables inspection for lot determination based on the process capability index C. International Journal of Production Research 61:10, pages 3171-3183.
Read now
Baocai Guo, Qiming Xia, Yingying Sun & Muhammad Aslam. (2023) Generalized confidence intervals of quantile-based process capability indices for inverse Gaussian distribution. Quality Technology & Quantitative Management 20:3, pages 405-417.
Read now
Dwi Yuli Rakhmawati & Junghye Lee. (2023) A product acceptance decision-making method based on process capability with considering gauge measurement errors. Communications in Statistics - Theory and Methods 52:8, pages 2646-2665.
Read now
Fanbing Meng, Jun Yang & Qi Li. (2023) Process quality recheck for Gamma quality characteristic from supplier products: a case study on radio-frequency power. International Journal of Production Research 61:6, pages 1849-1865.
Read now
Zih-Huei Wang. (2023) Optimal design of a two-point variables skip-lot sampling plan with Taguchi capability index. Quality Engineering 35:1, pages 20-32.
Read now
Michael Bendersky, Noam Barak & Yisrael Parmet. (2022) Dual response surface optimization using a process “capability” index. Communications in Statistics - Theory and Methods 51:20, pages 7006-7020.
Read now
Chien-Wei Wu, Jr-Tzung Chen & Shih-Wen Liu. (2022) Designing a yield-based skip-lot sampling plan for lot acceptance determination. Journal of the Operational Research Society 73:3, pages 653-663.
Read now
A. Pakzad, H. Razavi & B. Sadeghpour Gildeh. (2022) Developing loss-based functional process capability indices for simple linear profile. Journal of Statistical Computation and Simulation 92:1, pages 115-144.
Read now
Chung-Ho Chen & Chao-Yu Chou. (2021) Optimal process mean, specification limits, replenishment cycle time, and credit period for the buyer-seller model with specified capability value. Journal of Information and Optimization Sciences 42:4, pages 845-854.
Read now
Chien-Wei Wu & Jr-Tzung Chen. (2021) A modified sampling plan by variables with an adjustable mechanism for lot sentencing. Journal of the Operational Research Society 72:3, pages 678-687.
Read now
Chien-Che Huang, Tsang-Chuan Chang & Bae-Ling Chen. (2021) Fuzzy assessment model to judge quality level of machining processes involving bilateral tolerance using crisp data. Journal of the Chinese Institute of Engineers 44:1, pages 1-10.
Read now
Chung-Ho Chen & Chao-Yu Chou. (2020) The integrated quality control model with product inspection and process improvement. Quality Technology & Quantitative Management 17:6, pages 646-660.
Read now
Chung-Ho Chen & Chao-Yu Chou. (2020) The integrated study for process improvement with economic specification limits, process means setting and quality investment: an extension of the model in Abdul-Kader et al. (2010). Quality Technology & Quantitative Management 17:6, pages 627-645.
Read now
Kuen-Suan Chen & Tsang-Chuan Chang. (2020) Construction and fuzzy hypothesis testing of Taguchi Six Sigma quality index. International Journal of Production Research 58:10, pages 3110-3125.
Read now
Imran Siraj & Pushpendra S. Bharti. (2020) Process capability analysis of a 3D printing process. Journal of Interdisciplinary Mathematics 23:1, pages 175-189.
Read now
Vasileios Alevizakos & Christos Koukouvinos. (2019) An asymptotic confidence interval for the process capability index C. Communications in Statistics - Theory and Methods 48:20, pages 5138-5144.
Read now
S. Balamurali & M. Usha. (2019) Determination of an efficient variables sampling system based on the Taguchi process capability index. Journal of the Operational Research Society 70:3, pages 420-432.
Read now
Chung-Ho Chen & Chao-Yu Chou. (2018) Economic design of product and process parameters under the specified process capability value. Quality Technology & Quantitative Management 15:6, pages 686-701.
Read now
Kuen-Suan Chen, Kung-Jeng Wang & Tsang-Chuan Chang. (2017) A novel approach to deriving the lower confidence limit of indices C, C, and C in assessing process capability. International Journal of Production Research 55:17, pages 4963-4981.
Read now
Chung-Ho Chen & Chao-Yu Chou. (2017) The joint determination of specification limits, process mean, and economic manufacturing quantity. Journal of Industrial and Production Engineering 34:4, pages 283-288.
Read now
Kuen-Suan Chen, Hsi-Tien Chen & Tsang-Chuan Chang. (2017) The construction and application of Six Sigma quality indices. International Journal of Production Research 55:8, pages 2365-2384.
Read now
Moutushi Chatterjee. (2017) Exact expression for the expectation of estimated C based on control chart information and the corresponding process capability control charts. Journal of Statistical Computation and Simulation 87:5, pages 1025-1047.
Read now
Kuen-Suan Chen, Cheng-Fu Huang & Tsang-Chuan Chang. (2017) A mathematical programming model for constructing the confidence interval of process capability index C in evaluating process performance: an example of five-way pipe. Journal of the Chinese Institute of Engineers 40:2, pages 126-133.
Read now
Chang-Hsien Hsu, Kuen-Suan Chen & Chun-Ming Yang. (2016) Construction of closed interval for process capability indices C, C, and S based on Boole’s inequality and de Morgan’s laws. Journal of Statistical Computation and Simulation 86:18, pages 3701-3714.
Read now
Muhammad Riaz & Tayyiba Hamid. (2016) On the performance of different capability indices under normal and non-normal distributions. Journal of the Chinese Institute of Engineers 39:8, pages 889-899.
Read now
Kun-Tzu Yu & Kuen-Suan Chen. (2016) Testing and analysing capability performance for products with multiple characteristics. International Journal of Production Research 54:21, pages 6633-6643.
Read now
W. L. Pearn, Y. T. Tai & C. H. Wu. (2016) A note on production yield measure for multiple lines. Quality Technology & Quantitative Management 13:4, pages 394-402.
Read now
Z. Abbasi Ganji & B. Sadeghpour Gildeh. (2016) A class of process capability indices for asymmetric tolerances. Quality Engineering 28:4, pages 441-454.
Read now
Michael Perakis & Evdokia Xekalaki. (2016) On the relationship between process capability indices and the proportion of conformance. Quality Technology & Quantitative Management 13:2, pages 207-220.
Read now
Chin-Chieh Wu, Jyh-Jen Horng Shiau, W. L. Pearn & Hui-Nien Hung. (2016) A Bayesian approach for group supplier selections based on the popular process-capability-index C. Quality Technology & Quantitative Management 13:2, pages 109-123.
Read now
Chien-Wei Wu, James C. Chen & Tai-Hsi Wu. (2015) A flexible sampling scheme for variables inspection with loss consideration. Journal of Statistical Computation and Simulation 85:18, pages 3766-3777.
Read now
Moutushi Chatterjee & Ashis Kumar Chakraborty. (2015) Distributions and Process Capability Control Charts for C and C Using Subgroup Information. Communications in Statistics - Theory and Methods 44:20, pages 4333-4353.
Read now
Chien-Wei Wu, Zih-Huei Wang & Ming-Hung Shu. (2015) A lots-dependent variables sampling plan considering supplier’s process loss and buyer’s stipulated specifications requirement. International Journal of Production Research 53:20, pages 6308-6319.
Read now
Mou-Yuan Liao, W.L. Pearn & Yen-Lun Liu. (2015) Assessing the actual Gamma process quality – a curve-fitting approach for modifying the non-normal flexible index. International Journal of Production Research 53:15, pages 4720-4734.
Read now
Chung-Ho Chen & Chao-Chin Kan. (2015) Tolerance design based on specified process capability value. International Journal of Management Science and Engineering Management 10:3, pages 210-214.
Read now
Wen Lea Pearn, Chin Chieh Wu & Chia Huang Wu. (2015) Estimating process capability index C: classical approach versus Bayesian approach. Journal of Statistical Computation and Simulation 85:10, pages 2007-2021.
Read now
Moutushi Chatterjee & Ashis Kumar Chakraborty. (2015) A Superstructure of Process Capability Indices for Circular Specification Region. Communications in Statistics - Theory and Methods 44:6, pages 1158-1181.
Read now
Shen-Ho Chang, Shaio Yan Huang, Teng-Shih Wang & Dennis B. K. Hwang. (2014) The development of an indicator for measuring information quality of discretionary accruals. Applied Financial Economics 24:18, pages 1177-1186.
Read now
Ming-Hung Shu & Hsien-Chung Wu. (2014) Supplier Evaluation and Selection Based on Stochastic Dominance: A Quality-Based Approach. Communications in Statistics - Theory and Methods 43:14, pages 2907-2922.
Read now
L.S. Dharmasena & P. Zeephongsekul. (2014) Univariate and multivariate process yield indices based on location-scale family of distributions. International Journal of Production Research 52:11, pages 3348-3365.
Read now
Chung-Ho Chen, Chao-Yu Chou, Chao-Chin Kan & Michael B. C. Khoo. (2014) Production quantity and specification limits settings by considering specified process capability value. Journal of Industrial and Production Engineering 31:4, pages 229-237.
Read now
Chung-Ho Chen, Chao-Yu Chou & Chao-Chin Kan. (2014) Economic specification limits and process mean settings by considering unequal target value and specification center. Journal of Industrial and Production Engineering 31:4, pages 199-205.
Read now
Jung Lyu & Chih-Chin Liang. (2014) Effective approach to quality control for small–medium software companies. Total Quality Management & Business Excellence 25:3-4, pages 296-308.
Read now
S.C. Mondal, P.K. Ray & J. Maiti. (2014) Modelling robustness for manufacturing processes: a critical review. International Journal of Production Research 52:2, pages 521-538.
Read now
Muhammad Aslam, Chien-Wei Wu, Chi-Hyuck Jun, Muhammad Azam & Negrin Itay. (2013) Developing a variables repetitive group sampling plan based on process capability index C with unknown mean and variance. Journal of Statistical Computation and Simulation 83:8, pages 1507-1517.
Read now
Chien-Wei Wu. (2013) Process performance evaluation based on Taguchi capability index with the consideration of measurement errors. International Journal of Systems Science 44:8, pages 1386-1399.
Read now
Chien-Wei Wu, Mou-Yuan Liao & Tsung-Tse Yang. (2013) Efficient methods for comparing two process yields – strategies on supplier selection. International Journal of Production Research 51:5, pages 1587-1602.
Read now
Ching-Ho Yen. (2012) Fuzzy Testing for One-Sided Process Capability Indices. Communications in Statistics - Theory and Methods 41:9, pages 1603-1616.
Read now
Abdulkadir Hussein, S. Ejaz Ahmed & S. Bhatti. (2012) Sequential testing of process capability indices. Journal of Statistical Computation and Simulation 82:2, pages 279-292.
Read now
Daniel Grau. (2011) Process Yield and Capability Indices. Communications in Statistics - Theory and Methods 40:15, pages 2751-2771.
Read now
Zeinab Ramezani, Abbas Parchami & Mashaallah Mashinchi. (2011) Fuzzy confidence regions for the Taguchi capability index. International Journal of Systems Science 42:6, pages 977-987.
Read now
Chien-Wei Wu. (2011) Using a novel approach to assess process performance in the presence of measurement errors. Journal of Statistical Computation and Simulation 81:3, pages 301-314.
Read now
W.L. Pearn & Ya-Ching Cheng. (2010) Measuring production yield for processes with multiple characteristics. International Journal of Production Research 48:15, pages 4519-4536.
Read now
Chien-Wei Wu & P. H. Huang. (2010) Generalized Confidence Intervals for Comparing the Capability of Two Processes. Communications in Statistics - Theory and Methods 39:13, pages 2351-2364.
Read now
Wen-Tsann Lin, Shen-Tsu Wang, Meng-Hua Li, Jiung-Ming Huang & Ken-Suan Chen. (2010) An evaluation model for process capability of multiple-process machinery: a case study on the transfer machinery. Journal of Statistics and Management Systems 13:3, pages 445-466.
Read now
A. Parchami, M. Mashinchi & A. Sharayei. (2010) An effective approach for measuring the capability of manufacturing processes. Production Planning & Control 21:3, pages 250-257.
Read now
Michael Perakis. (2010) Estimation of differences between process capability indices C or C for two processes. Journal of Statistical Computation and Simulation 80:3, pages 315-334.
Read now
W.L. Pearn, Hui Nien Hung, Ya Ching Cheng & Gu Hong Lin. (2010) Procedure of the convolution method for estimating production yield with sample size information. International Journal of Production Research 48:5, pages 1245-1265.
Read now
Angus Jeang. (2010) Optimal process capability analysis for process design. International Journal of Production Research 48:4, pages 957-989.
Read now
Shu-Fei Wu & Mei-Chu Liang. (2010) A note on the asymptotic distribution of the process capability index C . Journal of Statistical Computation and Simulation 80:2, pages 227-235.
Read now
A. Parchami & M. Mashinchi. (2010) A new generation of process capability indices. Journal of Applied Statistics 37:1, pages 77-89.
Read now
Chao-Yu Chou, Wei-Tseng Lai, Yu-Chang Lin & Jui-Chang Cheng. (2009) A sensitivity study on the bootstrap confidence interval of the capability index C . Journal of Interdisciplinary Mathematics 12:6, pages 785-804.
Read now
W. L. Pearn, Dong-Yuh Yang & Ya-Ching Cheng. (2009) An Improved Approach for Estimating Product Performance Based on the Capability Index C . Communications in Statistics - Simulation and Computation 38:10, pages 2073-2095.
Read now
C. T. Hsieh, K. S. Chen & S. C. Chen. (2009) Quality performance analysis for the whole product family with multiple characteristics: apply the cooling pump as an example. Journal of Statistics and Management Systems 12:5, pages 927-938.
Read now
Chien-Wei Wu, Ming-Hung Shu, W. L. Pearn & Feng-Tsung Cheng. (2009) A comparison of methods forsing loss-based capability index. Journal of Statistical Computation and Simulation 79:9, pages 1129-1141.
Read now
Dja-Shin Wang, Tong-Yuan Koo & Chao-Yu Chou. (2009) Statistical inference on the multiple-stream yield index . Journal of Statistics and Management Systems 12:4, pages 671-678.
Read now
Jeh-Nan Pan & Chun-Yi Lee. (2009) Development of a New Process Incapability Index with an Application to the Evaluation of Manufacturing Risk. Communications in Statistics - Theory and Methods 38:8, pages 1133-1153.
Read now
C.-W. Wu, M. H. Shu, W. L. Pearn & K. H. Liu. (2008) Bootstrap approach for supplier selection based on production yield. International Journal of Production Research 46:18, pages 5211-5230.
Read now
K. S. Chen, M. L. Huang & Y. H. Hung. (2008) Process capability analysis chart with the application of . International Journal of Production Research 46:16, pages 4483-4499.
Read now
Chien-Wei Wu & Y. C. Chang. (2008) A Hypothesis Testing Procedure on Assessing Process Performance for Asymmetric Tolerances. Communications in Statistics - Theory and Methods 37:12, pages 1959-1976.
Read now
K.S. Chen, C.T. Lin & S.C. Chen. (2008) Applying Six-Sigma methodology in constructing the quick response of a case reporting system. Total Quality Management & Business Excellence 19:4, pages 381-398.
Read now
Lee-Ing Tong, Hsi-Tien Chen & Yu-Fang Tai. (2008) Constructing BCa Bootstrap Confidence Interval for the Difference between Two Non-normal Process Capability Indices C . Quality Engineering 20:2, pages 209-220.
Read now
Chien-Wei Wu. (2007) An alternative approach to test process capability for unilateral specification with subsamples. International Journal of Production Research 45:22, pages 5397-5415.
Read now
Chien-Wei Wu & M. H. Shu. (2007) A Bayesian Procedure for Assessing Process Performance Based on Expected Relative Loss with Asymmetric Tolerances. Journal of Applied Statistics 34:9, pages 1109-1123.
Read now
Fu-Kwun Wang & Timon Du. (2007) Applying Capability Index to the Supply Network Analysis. Total Quality Management & Business Excellence 18:4, pages 425-434.
Read now
H. T. Chen & K. S. Chen. (2007) Advanced multi-process performance analysis chart for an entire product with joint confidence regions. International Journal of Production Research 45:9, pages 2141-2159.
Read now
Gu-Hong Lin, Wern-Kueir Jehng, Kuang-Han Hsieh, Lai-Wang Wang & Shun-Te Lai. (2007) A Bayesian approach on monitoring process capability. Journal of Statistics and Management Systems 10:2, pages 241-252.
Read now
P. C. Lin & Y. T. Chung. (2007) A practical implementation of the process capability index . Journal of Statistics and Management Systems 10:2, pages 211-225.
Read now
W. L. Pearn & YA Ching Cheng. (2007) Estimating process yield based on S for multiple samples. International Journal of Production Research 45:1, pages 49-64.
Read now
W. L. Pearn, Y. C. Chang & Chien-Wei Wu. (2006) Measuring Process Performance Based on Expected Loss with Asymmetric Tolerances. Journal of Applied Statistics 33:10, pages 1105-1120.
Read now
W. L. Pearn, F. K. Wang & C. H. Yen. (2006) Measuring production yield for processes with multiple quality characteristics. International Journal of Production Research 44:21, pages 4649-4661.
Read now
W.L. Pearn, P.C. Lin, Y.C. Chang & Chien-Wei Wu. (2006) Quality yield measure for processes with asymmetric tolerances. IIE Transactions 38:8, pages 619-633.
Read now
Gu-Hong Lin. (2006) A hypothesis testing procedure on assessing process performance. Journal of Statistics and Management Systems 9:2, pages 319-339.
Read now
W. L. Pearn, Ya-Chen Hsu & Chien-Wei Wu. (2006) Tool replacement for production with a low fraction of defectives. International Journal of Production Research 44:12, pages 2313-2326.
Read now
K. S. Chen & M. L. Huang. (2006) Performance measurement for a manufacturing system based on quality, cost and time. International Journal of Production Research 44:11, pages 2221-2243.
Read now
W L Pearn & Chien-Wei Wu. (2006) Variables sampling plans with PPM fraction of defectives and process loss consideration. Journal of the Operational Research Society 57:4, pages 450-459.
Read now
Tung Liang Liao, Mei-Chu Ke, Kuen-Shan Chen & Hsin-Yuan Wu. (2006) Performance examination of the operations of a bank teller. Journal of Statistics and Management Systems 9:1, pages 165-174.
Read now
C. H. Liao, P. C. Lin & T. C. Hsia. (2006) Evaluating the performance of the official document. Journal of Statistics and Management Systems 9:1, pages 151-163.
Read now
K. S. Chen & K. L. Chen. (2006) Supplier selection by testing the process incapability index. International Journal of Production Research 44:3, pages 589-600.
Read now
Bill Denniston. (2006) Capability Indices and Conformance to Specification: The Motivation for Using Cpm. Quality Engineering 18:1, pages 79-88.
Read now
W. L. Pearn, M. H. Shu & B. M. Hsu. (2005) Testing process capability based on C in the presence of random measurement errors. Journal of Applied Statistics 32:10, pages 1003-1024.
Read now
W.L. Pearn & Chien-Wei Wu. (2005) AN EFFECTIVE MODERN APPROACH FOR MEASURING HIGH-TECH PRODUCT MANUFACTURING PROCESS QUALITY. Journal of the Chinese Institute of Industrial Engineers 22:2, pages 119-133.
Read now
Wen-Pei Sung, Ming-Hsiang Shih & Kuen-Suan Chen. (2005) Evaluation method for the optimum seismic energy dissipation performance of displacement dependent seismic-active hydraulic damper. Journal of Statistics and Management Systems 8:2, pages 261-273.
Read now
M.H. Shu & K.S. Chen. (2005) Estimating Process Capability Indices Based on Subsamples for Asymmetric Tolerances. Communications in Statistics - Theory and Methods 34:2, pages 485-505.
Read now
M.H. Shu & B.M. Hsu. (2005) Sample size determination for estimating process precision and process loss based on multiple samples with designated accuracy ratio. Journal of Information and Optimization Sciences 26:1, pages 71-91.
Read now
Lorraine Daniels, Byron Edgar, Richard K. Burdick & Norma Faris Hubele. (2004) Using Confidence Intervals to Compare Process Capability Indices. Quality Engineering 17:1, pages 23-32.
Read now
W. L. Pearn , Y. C. Chang & Chien-Wei Wu. (2004) Quality-yield measure for production processes with very low fraction defective. International Journal of Production Research 42:23, pages 4909-4925.
Read now
M. H. Shu, Wen-Pei Sung & Kuen-Suan Chen. (2004) The optimum simulation method for added damping and stiffness device. Journal of Information and Optimization Sciences 25:3, pages 423-439.
Read now
Jann-Pygn Chen & K. S. Chen. (2004) Comparing the Capability of Two Processes Using Cpm. Journal of Quality Technology 36:3, pages 329-335.
Read now
W. L. Pearn, C.-W. Wu & H. C. Lin. (2004) Procedure for supplier selection based on C applied to super twisted nematic liquid crystal display processes. International Journal of Production Research 42:13, pages 2719-2734.
Read now
Cheng-I. Lin, Wen-Pei Sung & Kuen-Suan Chen. (2004) Study on management method for fireproof duration of constructional material. Journal of Information and Optimization Sciences 25:2, pages 349-360.
Read now
Norma Faris Hubele & Kerstin Vännman. (2004) The Effect of Pooled and Un-Pooled Variance Estimators on C When Using Subsamples. Journal of Quality Technology 36:2, pages 207-222.
Read now
Shu-Kai Fan & Ching-Kuei Kao. (2004) LOWER BAYESIAN CONFIDENCE LIMITS ON THE PROCESS CAPABILITY INDEX Cpm: A COMPARATIVE STUDY. Journal of the Chinese Institute of Industrial Engineers 21:5, pages 444-452.
Read now
Jiung Ming Huang & Ken Suan Chen. (2004) An algorithm of performance evaluation for mould development. Production Planning & Control 15:1, pages 55-62.
Read now
K. S. Chen, R. K. Li & S. J. Liao. (2004) Process capability analysis of a product family of larger-the-better type. Journal of Information and Optimization Sciences 25:1, pages 93-104.
Read now
T.W. Chen, J. Y. Lin & K. S. Chen. (2004) Application of Neuro-fuzzy inference for process capability evaluation. Journal of Information and Optimization Sciences 25:1, pages 77-91.
Read now
Wen-Pei Sung, Kuen-Suan Chen, Wernshyuan Song & Yu-Yin Tsai. (2003) Evaluation Method for Performance of Formwork Process of Construction Industry. Journal of Asian Architecture and Building Engineering 2:2, pages b1-b6.
Read now
C. C. Wu, K. S. Chen & H. L. Kuo. (2003) Process capability evaluation of a product. Journal of Information and Optimization Sciences 24:3, pages 521-542.
Read now
S. Balamurali. (2003) Bootstrap Confidence Limits for Short-Run Capability Indices. Quality Engineering 15:4, pages 643-648.
Read now
S. K. Liang, K. S. Chen & Y. H. Hung. (2003) Measuring banking operation performance by applying a process capability index. Journal of Information and Optimization Sciences 24:2, pages 317-328.
Read now
Edwin R. van den Heuvel & Roxana A. Ion. (2003) Capability Indices and the Proportion of Nonconforming Items. Quality Engineering 15:3, pages 427-439.
Read now
Michael Perakis & Evdokia Xekalaki. (2003) On a Process Capability Index for Asymmetric Specifications. Communications in Statistics - Theory and Methods 32:7, pages 1459-1492.
Read now
Chin-Chuan Wu, Liang-Yuh Ouyang & Hsin-Lin Kuo. (2003) BAYESIAN ESTIMATIONS OF SOME PROCESS CAPABILITY INDICES UNDER RESTRICTIVE ASSUMPTIONS. Journal of the Chinese Institute of Industrial Engineers 20:1, pages 49-61.
Read now
A. Nanthakumar & K. Selvavel. (2003) On Fixed-Width Estimation of Process Capability Index Cpm. American Journal of Mathematical and Management Sciences 23:1-2, pages 93-108.
Read now
P. C. Lin, W. L. Pearn & K. S. Chen. (2003) Distributional Properties and Implications of the Estimated Process Incapability Index Ĉpp. American Journal of Mathematical and Management Sciences 23:1-2, pages 75-92.
Read now
W. L Pearn & Ming-Hung Shu. (2003) Lower confidence bounds with sample size information for C applied to production yield assurance. International Journal of Production Research 41:15, pages 3581-3599.
Read now
S. Balamurali & M. Kalyanasundaram. (2002) Construction of a generalized robust Taguchi capability index. Journal of Applied Statistics 29:7, pages 967-971.
Read now
B. Zhang & J. Ni. (2002) Relative Probability Index C : An Alternative Process Capability Index. Quality Engineering 14:2, pages 267-278.
Read now
Kyung H. Nam, Dae Kyung Kim & Dong Ho Park. (2002) Large-Sample Interval Estimators for Process Capability Indices. Quality Engineering 14:2, pages 213-221.
Read now
Chin-yao Low, Fong-Jung Yu & Chien-Hua Tsai. (2002) AN APPROACH OF BOOTSTRAP IN CAPABILITY INDICES OF ASYMMETRIC TOLERANCES. Journal of the Chinese Institute of Industrial Engineers 19:2, pages 107-117.
Read now
Hsi-Tien Chen, Lee-Ing Tong & Kuan-Shan Chen. (2002) ASSESSING THE LIFETIME PERFORMANCE OF ELECTRONIC COMPONENTS BY CONFIDENCE INTERVAL. Journal of the Chinese Institute of Industrial Engineers 19:2, pages 53-60.
Read now
Michael Perakis & Evdokia Xekalaki. (2002) A process capability index that is based on the proportion of conformance. Journal of Statistical Computation and Simulation 72:9, pages 707-718.
Read now
Fred Spiring, Smiley Cheng, Anthony Yeung & Bartholomew Leung. (2002) Discussion. Journal of Quality Technology 34:1, pages 23-27.
Read now
Samuel Kotz & Norman L. Johnson. (2002) Process Capability Indices—A Review, 1992–2000. Journal of Quality Technology 34:1, pages 2-19.
Read now
Jirarat Teeravaraprug & Byung Rae Cho. (2002) Designing the optimal process target levels for multiple quality characteristics. International Journal of Production Research 40:1, pages 37-54.
Read now
Kuen‐Suan Chen & Wen‐Lee Pearn. (2001) Capability indices for processes with asymmetric tolerances. Journal of the Chinese Institute of Engineers 24:5, pages 559-568.
Read now
A.B. Yeh & H. Chen. (2001) A Nonparametric Multivariate Process Capability Index. International Journal of Modelling and Simulation 21:3, pages 218-223.
Read now
K. S. Chen, M. L. Huang & R. K. Li. (2001) Process capability analysis for an entire product. International Journal of Production Research 39:17, pages 4077-4087.
Read now
Kuen Suan Chen & Sheng‐Lung Kuo. (2000) An effective method for the activities of environmental analysis. Journal of the Chinese Institute of Engineers 23:5, pages 575-581.
Read now
Murali Niverthi & Dipak K. Dey. (2000) Multivariate process capability a bayesian perspective. Communications in Statistics - Simulation and Computation 29:2, pages 667-687.
Read now
K. S. Chen & H. H. Pang. (1999) 供應商之交期績縫量. Journal of the Chinese Institute of Industrial Engineers 16:6, pages 681-688.
Read now
Y. Zhang & X. Daniel Fang. (1999) TARGET ALLOCATION FOR MAXIMIZING WEAR ALLOWANCE OF RUNNING FITS BASED ON PROCESS CAPABILITY. Quality Engineering 12:2, pages 169-176.
Read now
W. L. Pearn, K. L. Chen & C. H. Ko. (1999) 應用製程能力弱度指標C 評估有目標値TT之製程能力. Journal of the Chinese Institute of Industrial Engineers 16:4, pages 519-531.
Read now
S. Subba Rao & Weidong Xia. (1999) Measuring quality by process capability indices and the effects of non-normality. Journal of Statistics and Management Systems 2:2-3, pages 127-142.
Read now
JohnJ. Flaig. (1999) PROCESS CAPABILITY SENSITIVITY ANALYSIS. Quality Engineering 11:4, pages 587-592.
Read now
Mahmut Parlar & George O. Wesolowsky. (1999) Specification Limits, Capability Indices, and Process Centering in Assembly Manufacture. Journal of Quality Technology 31:3, pages 317-325.
Read now
Monica E. Dumitrescu & Norma Faris Hubele. (1999) An entropic framework for the normal distribution in capability analysis. Communications in Statistics - Theory and Methods 28:6, pages 1361-1377.
Read now
W. L. Pearn. (1998) New generalization of process capability index Cpk. Journal of Applied Statistics 25:6, pages 801-810.
Read now
CHANG-CHUNG LI, CHIANG KAO & SHIH-PIN CHEN. (1998) ROBUST TOLERANCE ALLOCATION USING STOCHASTIC PROGRAMMING. Engineering Optimization 30:3-4, pages 333-350.
Read now
K.S. Chen. (1998) Estimation of the process incapability index. Communications in Statistics - Theory and Methods 27:5, pages 1263-1274.
Read now
Arthur B. Yeh & Sumankumar Bhattcharya. (1998) A robust process capability index. Communications in Statistics - Simulation and Computation 27:2, pages 565-589.
Read now
Kerstin Vännman. (1998) Families of Capability Indices for One-Sided Specification Limits. Statistics 31:1, pages 43-66.
Read now
FlavioS. Fogliatto. (1997) A review of: “Robust design and analysis for quality engineering ” Sung H. Park Chapman & Hall, 1996, 329 pp., ISBN 0-412-55620-0. IIE Transactions 29:12, pages 1084-1086.
Read now
Seren Bisgaard & Spencer Graves. (1997) A Negative Process Capability Index from Assembling Good Components? A Problem in Statistical Tolerancing. Quality Engineering 10:2, pages 409-414.
Read now
L. S. Zimmer & N. F. Hubele. (1997) QUANTILES OF THE SAMPLING DISTRIBLITION OF C. Quality Engineering 10:2, pages 309-329.
Read now
K. S. Chen. (1997) 一個適用於非對稱規格區間的新製程能力指標. Journal of the Chinese Institute of Industrial Engineers 14:4, pages 355-362.
Read now
W. L. Pearn & K. S. Chen. (1997) MULTIPROCESS PERFORMANCE ANALYSIS: A CASE STUDY. Quality Engineering 10:1, pages 1-8.
Read now
Kerstin Vännman. (1997) A general class of capability indices in the case of asymmetric tolerances. Communications in Statistics - Theory and Methods 26:8, pages 2049-2072.
Read now
Kerstin Vännman. (1997) Distribution and moments in simplified form for a general class of capability indices. Communications in Statistics - Theory and Methods 26:1, pages 159-179.
Read now
Fred A. Spiring. (1997) A Unifying Approach to Process Capability Indices. Journal of Quality Technology 29:1, pages 49-58.
Read now
Nicolas R. Faddoul, John R. English & G. Don Taylor. (1996) The Impact of Mixture Distributions in Classical Process Capability Analysis. IIE Transactions 28:12, pages 957-966.
Read now
StevenE. Somerville & DouglasC. Montgomery. (1996) PROCESS CAPABILITY INDICES AND NON-NORMAL DISTRIBUTIONS. Quality Engineering 9:2, pages 305-316.
Read now
JohnJ. Flaig. (1996) A NEW APPROACH TO PROCESS CAPABILITY ANALYSIS. Quality Engineering 9:2, pages 205-211.
Read now
Sy-mien Chen. (1996) Response to the “letter to the editor”. Communications in Statistics - Theory and Methods 25:6, pages 1407-1408.
Read now
Yazhen Wang & K.S. Chen. (1996) The L2risk of an isotonic estimate. Communications in Statistics - Theory and Methods 25:2, pages 281-294.
Read now
W.L. pearn & K.S. chen. (1996) A bayesian-like estimator of cpk . Communications in Statistics - Simulation and Computation 25:2, pages 321-329.
Read now
Alberto Luceño. (1996) A process capability index with reliable confidence intervals. Communications in Statistics - Simulation and Computation 25:1, pages 235-245.
Read now
Helmut Schneider, James Pruett & Cliff Lagrange. (1995) Uses of Process Capability Indices in the Supplier Certification Process. Quality Engineering 8:2, pages 225-235.
Read now
FredA. Spiring. (1995) Process capability: A total quality management tool. Total Quality Management 6:1, pages 21-34.
Read now
Sy-Mien Chen & Nai-Feng Hsu. (1995) The asymptotic distribution of the process capability index C . Communications in Statistics - Theory and Methods 24:5, pages 1279-1291.
Read now
ELART VON COLLANI. (1995) Relevance and Difficulty of Teaching Stochastics, the Science of Randomness. European Journal of Engineering Education 20:3, pages 301-311.
Read now
YOUN-MIN CHOU. (1994) SELECTING A BETTER SUPPLIER BY TESTING PROCESS CAPABILITY INDICES. Quality Engineering 6:3, pages 427-438.
Read now
Russell A Boyles. (1994) Brocess capability with asymmetric tolerances. Communications in Statistics - Simulation and Computation 23:3, pages 615-635.
Read now
J. R. ENGLISH & G. D. TAYLOR. (1993) Process capability analysis—a robustness study. International Journal of Production Research 31:7, pages 1621-1635.
Read now
Y. ARTHUR LIN. (1993) THE INTEGRATION OF SPC WITH AUTOMATIC TEST EQUIPMENTS: A CASE STUDY. Quality Engineering 6:2, pages 209-241.
Read now
Perla Subbaiah & Winson Taam. (1993) Inference on the capability index: Cpm . Communications in Statistics - Theory and Methods 22:2, pages 537-560.
Read now
Youn-Min Chou & Alan Polansky. (1993) Power of tests for some process capability indices. Communications in Statistics - Simulation and Computation 22:2, pages 523-544.
Read now
W. L. Pearn, Samuel Kotz & Norman L. Johnson. (1992) Distributional and Inferential Properties of Process Capability Indices. Journal of Quality Technology 24:4, pages 216-231.
Read now
Thomas Johnson. (1992) The Relationship of C to Squared Error Loss. Journal of Quality Technology 24:4, pages 211-215.
Read now
Leroy A. Franklin & Gary S. Wasserman. (1992) Bootstrap Lower Confidence Limits for Capability Indices. Journal of Quality Technology 24:4, pages 196-210.
Read now
Robert H. Kushler & Paul Hurley. (1992) Confidence Bounds for Capability Indices. Journal of Quality Technology 24:4, pages 188-195.
Read now
Robert N. Rodriguez. (1992) Recent Developments in Process Capability Analysis. Journal of Quality Technology 24:4, pages 176-187.
Read now
SMILEYW. CHENG. (1992) IS THE PROCESS CAPABLE? TABLES AND GRAPHS IN ASSESSING Cpm . Quality Engineering 4:4, pages 563-576.
Read now
Nabil El Farme. A switcher skip lot-sampling plan under resubmitted lots using the Taguchi capability index for building a solid vendor-customer relationship. Communications in Statistics - Theory and Methods 0:0, pages 1-24.
Read now
Kuntal Bera & M. Z. Anis. Estimation of C for autocorrelated data in the presence of random measurement errors. Communications in Statistics - Simulation and Computation 0:0, pages 1-28.
Read now

Articles from other publishers (247)

Chun-Min Yu & Kuen-Suan Chen. (2024) Fuzzy process capability evaluation model for asymmetric tolerance production. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Crossref
Vikas Ghute & Mahesh Deshpande. (2023) Process capability index C pm under autoregressive process AR (2) . International Journal of Quality & Reliability Management 41:4, pages 1130-1141.
Crossref
Tsen-I Kuo & Tung-Lin Chuang. (2023) Process Capability Control Charts for Monitoring Process Accuracy and Precision. Axioms 12:9, pages 857.
Crossref
Wen-Pei Sung & Ming-Hsiang Shih. (2023) A chart to evaluate the effect of active control on a bridge. Proceedings of the Institution of Civil Engineers - Bridge Engineering, pages 1-15.
Crossref
Nidhal Ben Khedher, Attia Boudjemline, Walid Aich, Mohamed Ali Zeddini & Jorge E. Calderon-Madero. (2023) Statistical quality control based on control charts and process efficiency index by the application of fuzzy approach (case study: Ha'il, Saudi Arabia). Water Science & Technology.
Crossref
Kuen-Suan Chen, Guo-Ping Ye, Chun-Min Yu & Chun-Hung Yu. (2023) Construct the Optimum Process Model for Transistor Gaskets with Six-Sigma DMAIC. Applied Sciences 13:12, pages 6895.
Crossref
Tsang-Chuan Chang. (2022) Fuzzy process capability analysis for machined product with multiple characteristics of symmetric tolerance. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 237:5, pages 691-702.
Crossref
Mohammed Albassam & Muhammad Aslam. (2023) Product evaluation using uncertainty-based process capability index. Ain Shams Engineering Journal 14:4, pages 101947.
Crossref
Alexis Oliva & Matías Llabrés. (2023) Drug Shelf Life and Release Limits Estimation Based on Manufacturing Process Capability. Pharmaceutics 15:4, pages 1070.
Crossref
Nataly Paredes da Rocha, Osvaldo Cirilo da Silva, Eduardo José Barbosa, Gidel Soares, Roberto Oliveira, Lis Marie Monteiro & Nádia Araci Bou-Chacra. (2023) Statistical process control of manufacturing tablets for antiretroviral therapy. Brazilian Journal of Pharmaceutical Sciences 59.
Crossref
Kuen-Suan Chen, Chin-Chia Liu, Chi-Han Chen & Chun-Min Yu. (2022) Using Process Capability Indices to Develop the Execution Models of DMAIC Process. International Journal of Reliability, Quality and Safety Engineering 29:06.
Crossref
Zhan-Xiang Hu, Chang-Chiun Huang, Amit Kumar Gope & Chung-Feng Jeffrey Kuo. (2022) Improvement in Injection Molding Quality Performance with Innovative Cyclone Mixers Used in Polypropylene with Spherical Silicon Dioxide Composites. Polymers 14:22, pages 4932.
Crossref
Sheng Du, Min Wu, Luefeng Chen, Li Jin, Weihua Cao & Witold Pedrycz. (2022) Operating Performance Improvement Based on Prediction and Grade Assessment for Sintering Process. IEEE Transactions on Cybernetics 52:10, pages 10529-10541.
Crossref
Zih‐Huei Wang, Chien‐Wei Wu & Wei‐Ren Lin. (2021) Developing a variables modified chain sampling plan with Taguchi capability index. Quality and Reliability Engineering International 38:6, pages 3051-3061.
Crossref
Chun-Chieh Tseng, Kuo-Ching Chiou & Kuen-Suan Chen. (2022) Estimation of the Six Sigma Quality Index. Mathematics 10:19, pages 3458.
Crossref
To-Cheng Wang. (2022) Developing an adaptive sampling system indexed by Taguchi capability with acceptance-criterion-switching mechanism. The International Journal of Advanced Manufacturing Technology 122:5-6, pages 2329-2342.
Crossref
To‐Cheng Wang, Bi‐Min Hsu & Ming‐Hung Shu. (2022) Quick‐switch inspection scheme based on the overall process capability index for modern industrial web‐based processing environment. Applied Stochastic Models in Business and Industry 38:5, pages 847-861.
Crossref
Yunus Akdoğan. (2022) On the confidence intervals of process capability index Cpm based on a progressive type‐II censored sample. Quality and Reliability Engineering International 38:5, pages 2845-2861.
Crossref
Imran Siraj & Pushpendra S. Bharti. (2022) Embedding Quality in Extrusion-Based Additive Manufacturing Technologies. Journal of Materials Engineering and Performance 31:6, pages 5100-5117.
Crossref
Kuen-Suan Chen, Yung-Hsiang Hung & Yuan-Tsung Su. (2022) Multiple Manufacturing Processing Target Value Setting Models: A Case Study on Grinding and Polishing Processes of the Electric Vehicle Motor Shaft. Journal of Testing and Evaluation 50:3, pages 1468-1484.
Crossref
Kuen-Suan Chen. (2019) Fuzzy testing of operating performance index based on confidence intervals. Annals of Operations Research 311:1, pages 19-33.
Crossref
Michael Perakis. (2021) Some new methods for comparing the capability of two processes using process capability index C pm . International Journal of Quality & Reliability Management 39:5, pages 1170-1189.
Crossref
Tsang-Chuan Chang & Kuen-Suan Chen. (2022) Statistical Test of Two Taguchi Six-Sigma Quality Indices to Select the Supplier with Optimal Processing Quality. Journal of Testing and Evaluation 50:1, pages 674-688.
Crossref
Essam Zaneldin, Waleed Ahmed, Aya Mansour & Amged El Hassan. (2021) Dimensional Stability of 3D Printed Objects Made from Plastic Waste Using FDM: Potential Construction Applications. Buildings 11:11, pages 516.
Crossref

Displaying 200 of 423 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.