6,389
Views
359
CrossRef citations to date
0
Altmetric
Reviews

Polycaprolactone-based biomaterials for tissue engineering and drug delivery: Current scenario and challenges

, &
Pages 255-265 | Received 31 Aug 2015, Accepted 25 Sep 2015, Published online: 08 Jan 2016

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (26)

Hyun Ho Shin, Junyoung Park, Yeo-Jin Kim, Donghyeon Kim, Eun-Jung Jin & Ji Hyun Ryu. (2024) Hydrophilic/Hydrophobic Janus Nanofibers Containing Compound K for Cartilage Regeneration. International Journal of Nanomedicine 19, pages 1683-1697.
Read now
Anna Szabó, Ignace De Decker, Sam Semey, Karel E.Y. Claes, Phillip Blondeel, Stan Monstrey, Jo Van Dorpe & Sandra Van Vlierberghe. (2024) Photo-crosslinkable polyester microneedles as sustained drug release systems toward hypertrophic scar treatment. Drug Delivery 31:1.
Read now
Ali Motameni, İsmail Seçkin Çardaklı, Rıza Gürbüz, Ammar Z. Alshemary, Mehdi Razavi & Ömer Can Farukoğlu. (2024) Bioglass-polymer composite scaffolds for bone tissue regeneration: a review of current trends. International Journal of Polymeric Materials and Polymeric Biomaterials 73:7, pages 600-619.
Read now
Faraz Sigaroodi, Mahya Rahmani, Azim Parandakh, Safieh Boroumand, Shahram Rabbani & Mohammad-Mehdi Khani. (2024) Designing cardiac patches for myocardial regeneration–a review. International Journal of Polymeric Materials and Polymeric Biomaterials 73:7, pages 581-599.
Read now
Marco Uboldi, Arianna Chiappa, Margherita Rossi, Francesco Briatico-Vangosa, Alice Melocchi & Lucia Zema. (2024) Development of a multi-component gastroretentive expandable drug delivery system (GREDDS) for personalized administration of metformin. Expert Opinion on Drug Delivery 21:1, pages 131-149.
Read now
Radha Sachan, Sudhir G. Warkar & Roli Purwar. (2023) An overview on synthesis, properties and applications of polycaprolactone copolymers, blends & composites. Polymer-Plastics Technology and Materials 62:3, pages 327-358.
Read now
Francisco José de Nadai Dias, Stella Aparecida de Andrade Pinto, Arnaldo Rodrigues dos Santos$suffix/text()$suffix/text(), Maria do Carmo Aguiar Jordão Mainardi, Klaus Rischka & Cecilia Amélia de Carvalho Zavaglia. (2022) Resveratrol-loaded polycaprolactone scaffolds obtained by rotary jet spinning. International Journal of Polymer Analysis and Characterization 27:5, pages 289-301.
Read now
Mahdi Rezaei, Farideh Davani, Mohsen Alishahi & Fatemeh Masjedi. (2022) Updates in immunocompatibility of biomaterials: applications for regenerative medicine. Expert Review of Medical Devices 19:4, pages 353-367.
Read now
A. L. M. M. Toledo, B. S. Ramalho, P. H. S. Picciani, L.S. Baptista, A. M. B. Martinez & M. L. Dias. (2021) Effect of three different amines on the surface properties of electrospun polycaprolactone mats. International Journal of Polymeric Materials and Polymeric Biomaterials 70:17, pages 1258-1270.
Read now
Juliana Emanuelli, Viviane Pagnussat, Katherine Krieser, Julia Willig, Andréia Buffon, Luiz A. Kanis, Stanley Bilatto, Daniel Souza Correa, Thaís F. Maito, Sílvia S. Guterres, Adriana R. Pohlmann & Irene C . Külkamp-Guerreiro. (2021) Polycaprolactone and polycaprolactone triol blends to obtain a stable liquid nanotechnological formulation: synthesis, characterization and in vitro – in vivo taste masking evaluation. Drug Development and Industrial Pharmacy 47:10, pages 1556-1567.
Read now
Rashmi Choubey, Raje Chouhan, A. K. Bajpai, Jaya Bajpai & Sunil Kumar Singh. (2021) Silver hydroxyapatite (AgHAP) reinforced nanocomposites of poly (methyl methacrylate)-poly (ɛ-caprolactone) as hybrid orthopedic materials. International Journal of Polymeric Materials and Polymeric Biomaterials 70:11, pages 782-796.
Read now
Rimpy Diwan, Punna Rao Ravi, Shubham Ishwar Agarwal & Vidushi Aggarwal. (2021) Cilnidipine loaded poly (ε-caprolactone) nanoparticles for enhanced oral delivery: optimization using DoE, physical characterization, pharmacokinetic, and pharmacodynamic evaluation. Pharmaceutical Development and Technology 26:3, pages 278-290.
Read now
Mahdi Nouri, Marjan Abbasi, Mozhgan Seraj & Leila Mehraz. (2021) Fabrication and characterization of drug-loaded wet spun polycaprolactone fibers. The Journal of The Textile Institute 112:3, pages 462-469.
Read now
Marie-Odile Christen & Franco Vercesi. (2020) Polycaprolactone: How a Well-Known and Futuristic Polymer Has Become an Innovative Collagen-Stimulator in Esthetics. Clinical, Cosmetic and Investigational Dermatology 13, pages 31-48.
Read now
Mubashra Zehra, Waliya Zubairi, Anwarul Hasan, Hira Butt, Amna Ramzan, Maryam Azam, Azra Mehmood, Mojtaba Falahati, Aqif Anwar Chaudhry, Ihtesham Ur Rehman & Muhammad Yar. (2020) Oxygen Generating Polymeric Nano Fibers That Stimulate Angiogenesis and Show Efficient Wound Healing in a Diabetic Wound Model. International Journal of Nanomedicine 15, pages 3511-3522.
Read now
Saeed Mohammadi Nasr, Navid Rabiee, Sakineh Hajebi, Sepideh Ahmadi, Yousef Fatahi, Masoumehossadat Hosseini, Mojtaba Bagherzadeh, Amir Mohammad Ghadiri, Mohammad Rabiee, Vahid Jajarmi & Thomas J Webster. (2020) Biodegradable Nanopolymers in Cardiac Tissue Engineering: From Concept Towards Nanomedicine. International Journal of Nanomedicine 15, pages 4205-4224.
Read now
Pouyan Razmshoar, S. Hajir Bahrami & Somaye Akbari. (2020) Functional hydrophilic highly biodegradable PCL nanofibers through direct aminolysis of PAMAM dendrimer. International Journal of Polymeric Materials and Polymeric Biomaterials 69:16, pages 1069-1080.
Read now
Naile Ozturk, Asli Kara, Sevgi Gulyuz, Umut Ugur Ozkose, Mehmet Atilla Tasdelen, Asuman Bozkir, Ozgur Yilmaz & Imran Vural. (2020) Exploiting ionisable nature of PEtOx-co-PEI to prepare pH sensitive, doxorubicin-loaded micelles. Journal of Microencapsulation 37:7, pages 467-480.
Read now
Cláudia Martins, Veeren M Chauhan, Marco Araújo, Amjad Abouselo, Cristina C Barrias, Jonathan W Aylott & Bruno Sarmento. (2020) Advanced Polymeric Nanotechnology to Augment Therapeutic Delivery and Disease Diagnosis. Nanomedicine 15:23, pages 2287-2309.
Read now
Gajanan Kashinathrao Arbade, Juhi Srivastava, Vidisha Tripathi, Nibedita Lenka & T. Umasankar Patro. (2020) Enhancement of hydrophilicity, biocompatibility and biodegradability of poly(ε-caprolactone) electrospun nanofiber scaffolds using poly(ethylene glycol) and poly(L-lactide-co-ε-caprolactone-co-glycolide) as additives for soft tissue engineering. Journal of Biomaterials Science, Polymer Edition 31:13, pages 1648-1670.
Read now
Hamed Amani, Hanif Kazerooni, Hossein Hassanpoor, Abolfazl Akbarzadeh & Hamidreza Pazoki-Toroudi. (2019) Tailoring synthetic polymeric biomaterials towards nerve tissue engineering: a review. Artificial Cells, Nanomedicine, and Biotechnology 47:1, pages 3524-3539.
Read now
Shayla S. Spearman, Fahmida Irin, Srikanthan Ramesh, Iris V. Rivero, Micah J. Green & Ola L. A. Harrysson. (2019) Effect of pseudomonas lipase enzyme on the degradation of polycaprolactone/polycaprolactone-polyglycolide fiber blended nanocomposites. International Journal of Polymeric Materials and Polymeric Biomaterials 68:7, pages 360-367.
Read now
Anna Kołodziej, Aleksandra Wesełucha-Birczyńska, Małgorzata Świętek, Łukasz Skalniak & Marta Błażewicz. (2019) Raman microspectroscopic investigations of polymer nanocomposites: evaluation of physical and biophysical properties. International Journal of Polymeric Materials and Polymeric Biomaterials 68:1-3, pages 44-52.
Read now
Nicole D. Sempertegui, Akshay A. Narkhede, Vinoy Thomas & Shreyas S. Rao. (2018) A combined compression molding, heating, and leaching process for fabrication of micro-porous poly(ε-caprolactone) scaffolds. Journal of Biomaterials Science, Polymer Edition 29:16, pages 1978-1993.
Read now
Elbay Malikmammadov, Tugba Endogan Tanir, Aysel Kiziltay, Vasif Hasirci & Nesrin Hasirci. (2018) PCL and PCL-based materials in biomedical applications. Journal of Biomaterials Science, Polymer Edition 29:7-9, pages 863-893.
Read now
Elbay Malikmammadov, Tugba Endogan Tanir, Aysel Kiziltay, Vasif Hasirci & Nesrin Hasirci. (2018) PCL-TCP wet spun scaffolds carrying antibiotic-loaded microspheres for bone tissue engineering. Journal of Biomaterials Science, Polymer Edition 29:7-9, pages 805-824.
Read now

Articles from other publishers (333)

Brenna L. Devlin, Mark C. Allenby, Jiongyu Ren, Edmund Pickering, Travis J. Klein, Naomi C. Paxton & Maria A. Woodruff. (2024) Materials Design Innovations in Optimizing Cellular Behavior on Melt Electrowritten (MEW) Scaffolds. Advanced Functional Materials 34:18.
Crossref
Paweł Dec, Małgorzata Żyłka, Piotr Burszewski, Andrzej Modrzejewski & Andrzej Pawlik. (2024) Recent Advances in the Use of Stem Cells in Tissue Engineering and Adjunct Therapies for Tendon Reconstruction and Future Perspectives. International Journal of Molecular Sciences 25:8, pages 4498.
Crossref
Debajyoti Pal, Pratik Das, Prasenjit Mukherjee, Subhasis Roy, Shubhamitra Chaudhuri, Shyam Sundar Kesh, Debaki Ghosh & Samit Kumar Nandi. (2024) Biomaterials-Based Strategies to Enhance Angiogenesis in Diabetic Wound Healing. ACS Biomaterials Science & Engineering.
Crossref
Carlos Loyo, Humberto Palza, Marcela Saavedra, Daniel Canales, Claudio García-Herrera, Felipe Olate-Moya, Francisco Melo, Luis Cordova, Luis Solano & Paula A. Zapata. (2024) Electrospun polycaprolactone/graphene oxide scaffolds with secondary surface porosity and gelatin-coating. Materials Today Communications, pages 109057.
Crossref
Kossi Loic M. Avegnon, Andrew M. Bedke, Jacob D. Minyard, Marie–Rose Garda, Laurent Delbreih, Benoit Vieille, Mehrdad Negahban & Michael P. Sealy. (2024) Use of negative thermal expansion to design scaffolds for cultured meat. Materials & Design, pages 112992.
Crossref
Alla N. Generalova, Alexander A. Vikhrov, Anna I. Prostyakova, Samvel V. Apresyan, Alexander G. Stepanov, Maxim S. Myasoedov & Vladimir A. Oleinikov. (2024) Polymers in 3D printing of external maxillofacial prostheses and in their retention systems. International Journal of Pharmaceutics, pages 124181.
Crossref
Robbie A. Clark & Michael P. Shaver. (2024) Depolymerization within a Circular Plastics System. Chemical Reviews 124:5, pages 2617-2650.
Crossref
Teboho Clement Mokhena, Mandla Brian Chabalala, Sivuyisiwe Mapukata, Asanda Mtibe, Lerato Hlekelele, Zamani Cele, Mokgaotsa Jonas Mochane, Bulelwa Ntsendwana, Toitoi Amos Nhlapo, Teboho Patrick Mokoena, Mokae Fanuel Bambo, Kgabo Phillemon Matabola, Suprakas Sinha Ray, Emmanuel Rotimi Sadiku & Katekani Shingange. (2024) Electrospun PCL‐Based Materials for Health‐Care Applications: An Overview. Macromolecular Materials and Engineering.
Crossref
A. Ferrández‐Montero, P. Ortega‐Columbrans, A. Eguiluz, A. J. Sanchez‐Herencia, R. Detsch, A. R. Boccaccini & B. Ferrari. (2024) Biocompatible colloidal feedstock for material extrusion processing of bioceramic‐based scaffolds. Polymer Composites.
Crossref
Matthew Crago, Richard Tan, Juichien Hung, Steven G. Wise, Behnam Akhavan, Marcela Bilek, Fariba Dehghani, Sepehr Talebian & Sina Naficy. (2024) Durable plasma-mediated zwitterionic grafting on polymeric surfaces for implantable medical devices. Communications Materials 5:1.
Crossref
Ipek Atay, Emel Yilgör, Saliha Sürme, Ibrahim Halil Kavakli & Iskender Yilgör. (2024) Critical role of the composition of the cell culture medium on cell attachment and viability on PLA biocomposite scaffolds under in vitro assay conditions. Polymer 297, pages 126823.
Crossref
Amir Ershad-Langroudi, Nasrin Babazadeh, Farhad Alizadegan, Seyed Mehdi Mousaei & Gholamreza Moradi. (2024) Polymers for implantable devices. Journal of Industrial and Engineering Chemistry.
Crossref
Lorenzo Guidi, Maria Grazia Cascone & Elisabetta Rosellini. (2024) Light-responsive polymeric nanoparticles for retinal drug delivery: design cues, challenges and future perspectives. Heliyon 10:5, pages e26616.
Crossref
Alessia Valotta, Daniela Stelzer, Tamara Reiter, Wolfgang Kroutil & Heidrun Gruber-Woelfler. (2024) A multistep (semi)-continuous biocatalytic setup for the production of polycaprolactone. Reaction Chemistry & Engineering 9:3, pages 713-727.
Crossref
E Filipov, D Delibaltov, R Stefanov, B S Blagoev, G Avdeev, P Terziyska, R Stoykov & A Daskalova. (2024) Surface functionalization of 3D printed poly-ε-caprolactone by ultrashort laser mirostructuring and ZnO nanolayer deposition. Journal of Physics: Conference Series 2710:1, pages 012018.
Crossref
Jingyi Su, Zhaoxin Cao, Yueyang Mao, Wen Shen, Xinyu Wang, Siyu Zhang, Yanqi Chen & Xueme Ge. (2024) Preparation of eugenol/1−methylcyclopropene composite microsphere by S/O/W method and study on the postharvest quality of loquat. Journal of Stored Products Research 105, pages 102252.
Crossref
Sha Zhou, Jiyao Xing, Li Sun, Xiao Hu, Ting Liu, Qing Liu, Zongying Zhang, Minglu Hao, Bing Liang & Dongming Xing. (2023) Melt Electrowriting: A Promising 3D Printing Technology for Cartilage and Osteochondral Repair. Advanced Therapeutics 7:2.
Crossref
Rui Wang, Huiqi Xie & Yizhou Huang. 2024. Cartilage Tissue and Knee Joint Biomechanics. Cartilage Tissue and Knee Joint Biomechanics 681 713 .
Javad Esmaeili, Maedeh Rahimnejad, Mohammed Riaz Ur Rehman, Nima Beheshtizadeh & Aboulfazl Barati. 2024. Cartilage Tissue and Knee Joint Biomechanics. Cartilage Tissue and Knee Joint Biomechanics 487 506 .
Carlos Loyo, Alexander Cordoba, Humberto Palza, Daniel Canales, Francisco Melo, Juan F. Vivanco, Raúl Vallejos Baier, Carola Millán, Teresa Corrales & Paula A. Zapata. (2023) Effect of Gelatin Coating and GO Incorporation on the Properties and Degradability of Electrospun PCL Scaffolds for Bone Tissue Regeneration. Polymers 16:1, pages 129.
Crossref
Rodolfo M. de Moraes, Layde T. de Carvalho, Ana Julia R. M. Teixeira, Simone F. Medeiros & Amilton M. dos Santos. (2023) Well-defined amphiphilic poly(ε-caprolactone)-b-poly(N-isopropylacrylamide) and thermosensitive micelles formulation. Iranian Polymer Journal 32:12, pages 1627-1641.
Crossref
Reeya Agrawal, Anjan Kumar, Mustafa K. A. Mohammed & Sangeeta Singh. (2023) Biomaterial types, properties, medical applications, and other factors: a recent review最新综述:生物材料类型、性能、医疗应用及其他因素. Journal of Zhejiang University-SCIENCE A 24:11, pages 1027-1042.
Crossref
Semen Goreninskii, Apollinariya Volokhova, Anastasia Frolova, Mikhail Buldakov, Nadezhda Cherdyntseva, Evgeny Choynzonov, Evgeny Sudarev, Victor Filimonov, Sergei Tverdokhlebov & Evgeny Bolbasov. (2023) Prolonged and Controllable Release of Doxorubicin Hydrochloride from the Composite Electrospun Poly(ε-Caprolactone)/Polyvinylpyrrolidone Scaffolds. Journal of Pharmaceutical Sciences 112:11, pages 2752-2755.
Crossref
Deiviga Murugan, Ankitha Suresh, Goutam Thakur & Bhisham Narayan Singh. (2023) Fabrication and evaluation of poly(ε-caprolactone) based nanofibrous scaffolds loaded with homoeopathic mother tincture of Syzygium cumini for wound healing applications. OpenNano 14, pages 100189.
Crossref
F. Mindivan & M. Göktaş. (2023) The green synthesis of carbon quantum dots (CQDs) and characterization of polycaprolactone (PCL/CQDs) films. Colloids and Surfaces A: Physicochemical and Engineering Aspects 677, pages 132446.
Crossref
Jagoda Litowczenko, Jacek K. Wychowaniec, Karol Załęski, Łukasz Marczak, Charlotte J.C. Edwards-Gayle, Krzysztof Tadyszak & Barbara M. Maciejewska. (2023) Micro/nano-patterns for enhancing differentiation of human neural stem cells and fabrication of nerve conduits via soft lithography and 3D printing. Biomaterials Advances 154, pages 213653.
Crossref
Karolina Dziemidowicz, Simon C. Kellaway, Owein Guillemot-Legris, Omar Matar, Rita Pereira Trindade, Victoria H. Roberton, Melissa L.D. Rayner, Gareth R. Williams & James B. Phillips. (2023) Development of ibuprofen-loaded electrospun materials suitable for surgical implantation in peripheral nerve injury. Biomaterials Advances 154, pages 213623.
Crossref
Tingting Jiang, Yu Han, Niloufar Esmaeilizadeh, Amin Barkhordari, Abduladheem Turki Jalil, Marwan Mahmood Saleh, Sona Talaei & Younes Pilehvar. (2023) Epidural Administration of Curcumin-Loaded Polycaprolactone/Gelatin Electrospun Nanofibers for Extended Analgesia After Laminectomy in Rats. Applied Biochemistry and Biotechnology 195:11, pages 6557-6571.
Crossref
Barbora Šišková, Martin Kožár, Radka Staroňová, Ivan Shepa, Vanda Hajdučková, Patrícia Hudecová, Michaela Kaduková & Marek Schnitzer. (2023) Antibacterial Effect and Therapy of Chronic Skin Defects Using the Composite Bioscaffold Polycaprolactone/GelitaSpon/Povidone-Iodine in Domestic Dogs. Polymers 15:21, pages 4201.
Crossref
Rodrigo Fernandes Castanha, Anderson do Espírito Santo Pereira, Gabriela Patricia Unigarro Villarreal, José Henrique Vallim, Fernanda Sana Pertrini, Claudio Martín Jonsson, Leonardo Fernandes Fraceto & Vera Lúcia Scherholz Salgado de Castro. (2023) Ecotoxicity studies of two atrazine nanoformulations: From the evaluation of stability in media to the effects on aquatic organisms. Environmental Pollution 335, pages 122235.
Crossref
Ranjitsinh Pawar, Anam Pathan, Srishti Nagaraj, Harshad Kapare, Prabhanjan Giram & Ravindra Wavhale. (2023) Polycaprolactone and its derivatives for drug delivery. Polymers for Advanced Technologies 34:10, pages 3296-3316.
Crossref
Kaja I. Ritzau‐Reid, Sebastien J. P. Callens, Ruoxiao Xie, Martina Cihova, Daniel Reumann, Christopher L. Grigsby, Lino Prados‐Martin, Richard Wang, Axel C. Moore, James P. K. Armstrong, Juergen A. Knoblich & Molly M. Stevens. (2023) Microfibrous Scaffolds Guide Stem Cell Lumenogenesis and Brain Organoid Engineering. Advanced Materials 35:41.
Crossref
Nada K. Sedky, Kholoud K. Arafa, Manal M. M. Abdelhady, Marwa Y. Issa, Nour M. Abdel-Kader, Noha Khalil Mahdy, Fatma A. Mokhtar, Mohammad Y. Alfaifi & Sherif Ashraf Fahmy. (2023) Nedaplatin/Peganum harmala Alkaloids Co-Loaded Electrospun, Implantable Nanofibers: A Chemopreventive Nano-Delivery System for Treating and Preventing Breast Cancer Recurrence after Tumorectomy. Pharmaceutics 15:10, pages 2367.
Crossref
Devon J. Crouch, Carl M. Sheridan, Julia G. Behnsen, Raechelle A. D’Sa & Lucy A. Bosworth. (2023) Cryo-Electrospinning Generates Highly Porous Fiber Scaffolds Which Improves Trabecular Meshwork Cell Infiltration. Journal of Functional Biomaterials 14:10, pages 490.
Crossref
Krishanu Ghosal, Priyatosh Sarkar, Debojit Chakraborty, Sumedha Das & Kishor Sarkar. (2023) Green Synthesis of Nonisocyanate Poly(ester urethanes) from Renewable Resources and Recycled Poly(ethylene terephthalate) Waste for Tissue Engineering Application. ACS Sustainable Chemistry & Engineering 11:37, pages 13688-13708.
Crossref
Cristiana Plocon, Alexandru Evanghelidis, Monica Enculescu, Gabriela Isopencu, Ovidiu Oprea, Mihaela Bacalum, Mina Raileanu, Sorin Jinga & Cristina Busuioc. (2023) Development and Characterization of Electrospun Composites Built on Polycaprolactone and Cerium-Containing Phases. International Journal of Molecular Sciences 24:18, pages 14201.
Crossref
Victor A. da Silva, Bianca C. Bobotis, Felipe F. Correia, Théo H. Lima-Vasconcellos, Gabrielly M. D. Chiarantin, Laura De La Vega, Christiane B. Lombello, Stephanie M. Willerth, Sônia M. Malmonge, Vera Paschon & Alexandre H. Kihara. (2023) The Impact of Biomaterial Surface Properties on Engineering Neural Tissue for Spinal Cord Regeneration. International Journal of Molecular Sciences 24:17, pages 13642.
Crossref
Álvaro Morales López, Johan Berglund, Klas Marteleur & Anna Finne-Wistrand. (2023) Impact of storage at different thermal conditions on surface characteristics of 3D printed polycaprolactone and poly(ε-caprolactone-co-p-dioxanone) scaffolds. Bioprinting 33, pages e00293.
Crossref
Lucas J. Andrew, Sundiata Kly, Erin G. Moloney & Matthew G. Moffitt. (2023) Effects of Microfluidic Shear on the Plasmid DNA Structure: Implications for Polymeric Gene Delivery Vectors. Langmuir 39:33, pages 11545-11555.
Crossref
Ta-Hsin Tsung, Yu-Chien Tsai, Hsin-Pei Lee, Yi-Hao Chen & Da-Wen Lu. (2023) Biodegradable Polymer-Based Drug-Delivery Systems for Ocular Diseases. International Journal of Molecular Sciences 24:16, pages 12976.
Crossref
Musa Kamaci. (2023) A Polycaprolactone-Capped ZnO Quantum Dots-Based Fluorometric Sensor for the Detection of Fe3+ Ions in Seawater. Journal of Fluorescence.
Crossref
Roberto Delgado-Rivera, William García-Rodríguez, Luis López, Lisandro Cunci, Pedro J. Resto & Maribella Domenech. (2023) PCL/PEO Polymer Membrane Prevents Biofouling in Wearable Detection Sensors. Membranes 13:8, pages 728.
Crossref
Rathosivan Gopal, Muhammad Faiz Md Shakhih, Mariaulpa Sahalan, Te Chuan Lee, Hendra Hermawan, Sivakumar Sivalingam, Suhaini Kadiman & Syafiqah Saidin. (2023) Immobilization of blood coagulant factor VII on polycaprolactone membrane through polydopamine grafting. Colloids and Surfaces B: Biointerfaces 228, pages 113390.
Crossref
Leila Miri, Shiva Irani, Mohamad Pezeshki-Modaress, Hamed Daemi & Seyed Mohammad Atyabi. (2022) Guiding mesenchymal stem cells differentiation into chondrocytes using sulfated alginate/cold atmospheric plasma modified polycaprolactone nanofibrous scaffold. Polymer Bulletin 80:8, pages 8845-8860.
Crossref
Natalia Łopuszyńska & Władysław P. Węglarz. (2023) Contrasting Properties of Polymeric Nanocarriers for MRI-Guided Drug Delivery. Nanomaterials 13:15, pages 2163.
Crossref
Daisuke Tomioka, Satoshi Fujita, Jürgen Groll & Michiya Matsusaki. (2023) Hydroxyapatite Nanocoating on Calcium Peroxide Microparticles for Sustained Oxygen Release. Chemistry of Materials 35:14, pages 5378-5391.
Crossref
Krzysztof Moraczewski, Magdalena Stepczyńska, Rafał Malinowski, Tomasz Karasiewicz, Bartłomiej Jagodziński & Piotr Rytlewski. (2023) Modification of Polycaprolactone with Plant Extracts to Improve the Aging Resistance. Materials 16:14, pages 5154.
Crossref
Elhachemi Kenza, Atma Wafa, Zehhaf Abdelhafid, Bendouba Mostefa & Balil Ali. (2023) Synthesis and Characterization of Nanocomposite Based on Sodalite and Polycaprolactone. Russian Journal of Physical Chemistry A 97:7, pages 1532-1541.
Crossref
Prajakta Praveen Bhende, Rashmi Chauhan, Sachin Waigaonkar, Judith M. Bragança & Anasuya Ganguly. (2023) Composites of Bacillus megaterium H16 derived poly-3-hydroxybutyrate as a biomaterial for skin tissue engineering. International Journal of Biological Macromolecules 244, pages 125355.
Crossref
Matthew J. Moore, Yuen Ting Lam, Miguel Santos, Richard P. Tan, Nianji Yang, Juichien Hung, Zihao Li, Kristopher A. Kilian, Jelena Rnjak-Kovacina, Johannes B. Pitts, Henning Menzel & Steven G. Wise. (2023) Evaluation of the Immune Response to Chitosan- graft -poly(caprolactone) Biopolymer Scaffolds . ACS Biomaterials Science & Engineering 9:6, pages 3320-3334.
Crossref
Banafsheh Safari, Marziyeh Aghazadeh & Ayuob Aghanejad. (2023) Osteogenic differentiation of human adipose-derived mesenchymal stem cells in a bisphosphonate-functionalized polycaprolactone/gelatin scaffold. International Journal of Biological Macromolecules 241, pages 124573.
Crossref
Alessia Paradiso, Marina Volpi, Chiara Rinoldi, Nehar Celikkin, Nicola Contessi Negrini, Muge Bilgen, Giorgio Dallera, Filippo Pierini, Marco Costantini, Wojciech Święszkowski & Silvia Farè. (2023) In vitro functional models for human liver diseases and drug screening: beyond animal testing . Biomaterials Science 11:9, pages 2988-3015.
Crossref
Tae-Hee Kim, Se-Chang Kim, Won Sun Park, Il-Whan Choi, Hyun-Woo Kim, Hyun Wook Kang, Young-Mog Kim & Won-Kyo Jung. (2023) PCL/gelatin nanofibers incorporated with starfish polydeoxyribonucleotides for potential wound healing applications. Materials & Design 229, pages 111912.
Crossref
Didem DEMİR KARAKUŞ, Seda CEYLAN & Nimet BÖLGEN. (2023) Composite Cryogels for Drug Delivery Applications: A Preliminary Study with Dye as a Model Drug. Journal of the Turkish Chemical Society Section B: Chemical Engineering 6:1, pages 17-26.
Crossref
Tara Shabab, Onur Bas, Bronwin L. Dargaville, Akhilandeshwari Ravichandran, Phong A. Tran & Dietmar W. Hutmacher. (2023) Microporous/Macroporous Polycaprolactone Scaffolds for Dental Applications. Pharmaceutics 15:5, pages 1340.
Crossref
Vandana Kumari, Samrat Mukhopadhyay & Bhuvanesh Gupta. (2023) Evaluation of Terminalia arjuna loaded in surfactant modified polycaprolactone nanofiber as an infection resistant matrix . Journal of Applied Polymer Science 140:15.
Crossref
Cem Varan, Davut Aksüt, Murat Şen & Erem Bilensoy. (2023) Design and Characterization of Carboplatin and Paclitaxel Loaded PCL Filaments for 3D Printed Controlled Release Intrauterine Implants. Pharmaceutics 15:4, pages 1154.
Crossref
Sriputtha Noppadol, Wiwatwongwana Fasai & Promma Nattawit. (2023) Fabrication of Porous Polycaprolactone/Carboxymethylcellulose Scaffolds by using Salt Leaching Technique. Journal of Wuhan University of Technology-Mater. Sci. Ed. 38:2, pages 455-459.
Crossref
Souha H. Youssef, Sangseo Kim, Riya Khetan, Franklin Afinjuomo, Yunmei Song & Sanjay Garg. (2023) The development of 5-fluorouracil biodegradable implants: A comparative study of PCL/PLGA blends. Journal of Drug Delivery Science and Technology 81, pages 104300.
Crossref
Weslen Vedakumari Sathyaraj, Lokesh Prabakaran, Jayavardhini Bhoopathy, Sankari Dharmalingam, Ramadoss Karthikeyan & Raji Atchudan. (2023) Therapeutic Efficacy of Polymeric Biomaterials in Treating Diabetic Wounds—An Upcoming Wound Healing Technology. Polymers 15:5, pages 1205.
Crossref
Bahareh Farasati Far, Mohammad Reza Naimi-Jamal, Meysam Sedaghat, Alireza Hoseini, Negar Mohammadi & Mahdi Bodaghi. (2023) Combinational System of Lipid-Based Nanocarriers and Biodegradable Polymers for Wound Healing: An Updated Review. Journal of Functional Biomaterials 14:2, pages 115.
Crossref
Xavier Lacambra-Andreu, Abderrahim Maazouz, Khalid Lamnawar & Jean-Marc Chenal. (2023) A Review on Manufacturing Processes of Biocomposites Based on Poly(α-Esters) and Bioactive Glass Fillers for Bone Regeneration. Biomimetics 8:1, pages 81.
Crossref
Mehdi Shams, Mohammad Karimi, Vafa Jahangir, Milad Mohammadian & Ali Salimi. (2023) Surface modification of nanofibrous polyethersulfone scaffolds with fluorapatite nanoparticles toward improved stem cell behavior and osteogenic activity in vitro. Surfaces and Interfaces 36, pages 102512.
Crossref
Yogesh Nimbalkar, Sankalp A. Gharat, Vidhi Tanna, Vandana S. Nikam, Swapna Nabar & Sujata P. Sawarkar. (2023) Modification and Functionalization of Polymers for Targeting to Bone Cancer and Bone Regeneration. Critical Reviews in Biomedical Engineering 51:3, pages 21-58.
Crossref
Lalita Mehra & Payal Gupta. 2023. Fiber and Textile Engineering in Drug Delivery Systems. Fiber and Textile Engineering in Drug Delivery Systems 73 96 .
Ana Ferrández-Montero & Sandra C. Cifuentes. 2023. Biopolymers. Biopolymers 167 205 .
Riham R. Mohamed. 2023. Advanced Nanoformulations. Advanced Nanoformulations 669 683 .
Pinal Gandha, Tejas Surve & Balasubramanian Kandasubramanian. 2023. Handbook of Polymers in Medicine. Handbook of Polymers in Medicine 425 443 .
Amisha, Shubham Thakur & Amrinder Singh. 2023. Engineered Biomaterials. Engineered Biomaterials 429 463 .
Nidhi Gupta, Chandrani Sarkar & Sampa Saha. 2023. Biodegradable Polymers and Their Emerging Applications. Biodegradable Polymers and Their Emerging Applications 149 168 .
Laura Rojas-Rojas, María Laura Espinoza-Álvarez, Silvia Castro-Piedra, Andrea Ulloa-Fernández, Walter Vargas-Segura & Teodolito Guillén-Girón. (2022) Muscle-like Scaffolds for Biomechanical Stimulation in a Custom-Built Bioreactor. Polymers 14:24, pages 5427.
Crossref
Shin Yee Lee, Soon Yong Thow, Shalimar Abdullah, Min Hwei Ng & Nor Hazla Mohamed Haflah. (2022) Advancement of Electrospun Nerve Conduit for Peripheral Nerve Regeneration: A Systematic Review (2016–2021). International Journal of Nanomedicine Volume 17, pages 6723-6758.
Crossref
Noelia D. Machado, José E. Mosquera, Raquel E. Martini, María L. Goñi & Nicolás A. Gañán. (2022) Supercritical CO2-assisted impregnation/deposition of polymeric materials with pharmaceutical, nutraceutical, and biomedical applications: A review (2015–2021). The Journal of Supercritical Fluids 191, pages 105763.
Crossref
Luigi Musciacchio, Mario Mardirossian, Benedetta Guagnini, Alessandra Raffini, Michele Rizzo, Carlo Trombetta, Giovanni Liguori, Gianluca Turco & Davide Porrelli. (2022) Rifampicin-loaded electrospun polycaprolactone membranes: Characterization of stability, antibacterial effects and urotheliocytes proliferation. Materials & Design 224, pages 111286.
Crossref
Farnaz Sheikhi, Mohammad Khorram, Seyedeh-Sara Hashemi, Aliakbar Mohammadi & Hamed Peyrovedin. (2022) Preparation, Characterization, and Surface Modification of Polycaprolactone-Based Nanofibrous Scaffold by Grafting with Collagen for Skin Tissue Engineering. Regenerative Engineering and Translational Medicine 8:4, pages 545-562.
Crossref
Alessia Valotta, Lenny Malihan‐Yap, Kerstin Hinteregger, Robert Kourist & Heidrun Gruber‐Woelfler. (2022) Design and Investigation of a Photocatalytic Setup for Efficient Biotransformations Within Recombinant Cyanobacteria in Continuous Flow. ChemSusChem 15:22.
Crossref
Rainer Höfer. 2022. Renewable Resources for Surface Coatings, Inks, and Adhesives. Renewable Resources for Surface Coatings, Inks, and Adhesives 775 833 .
Khodayar Gholivand, Mahnaz Mohammadpour, Seyed Alireza Alavinasab Ardebili, Rahime Eshaghi Malekshah & Hadi Samadian. (2022) Fabrication and examination of polyorganophosphazene/polycaprolactone-based scaffold with degradation, in vitro and in vivo behaviors suitable for tissue engineering applications. Scientific Reports 12:1.
Crossref
Morteza Daavari, Masoud Atapour, Marta Mohedano, Hugo Mora Sánchez, Juan Rodríguez-Hernández, Endzhe Matykina, Raul Arrabal & Aboozar Taherizadeh. (2022) Quasi-in vivo corrosion behavior of AZ31B Mg alloy with hybrid MWCNTs-PEO/PCL based coatings. Journal of Magnesium and Alloys 10:11, pages 3217-3233.
Crossref
Krishna Gautam, Reena Vishvakarma, Poonam Sharma, Amarnath Singh, Vivek Kumar Gaur, Sunita Varjani & Janmejai Kumar Srivastava. (2022) Production of biopolymers from food waste: Constrains and perspectives. Bioresource Technology 361, pages 127650.
Crossref
Sabya Sachi Das, Sandeep Kumar Singh, P.R.P. Verma, Rekha Gahtori, Belay Zeleke Sibuh, Kavindra Kumar Kesari, Niraj Kumar Jha, Sugapriya Dhanasekaran, Vijay Kumar Thakur, Ling Shing Wong, Sinouvassane Djearamane & Piyush Kumar Gupta. (2022) Polyester nanomedicines targeting inflammatory signaling pathways for cancer therapy. Biomedicine & Pharmacotherapy 154, pages 113654.
Crossref
Masoud Vazirzadeh, Negar Azarpira, Parsa Davoodi, Massoud Vosough & Kamran Ghaedi. (2022) Natural Scaffolds Used for Liver Regeneration: A Narrative Update. Stem Cell Reviews and Reports 18:7, pages 2262-2278.
Crossref
Alaa Emad Eldeeb, Salwa Salah & Nermeen A. Elkasabgy. (2022) Biomaterials for Tissue Engineering Applications and Current Updates in the Field: A Comprehensive Review. AAPS PharmSciTech 23:7.
Crossref
Merle Kempfert, Elmar Willbold, Sebastian Loewner, Cornelia Blume, Johannes Pitts, Henning Menzel, Yvonne Roger, Andrea Hoffmann, Nina Angrisani & Janin Reifenrath. (2022) Polycaprolactone-Based 3D-Printed Scaffolds as Potential Implant Materials for Tendon-Defect Repair. Journal of Functional Biomaterials 13:4, pages 160.
Crossref
Natthapol Akkravijitkul, Nathaporn Cheechana, Puracheth Rithchumpon, Thiti Junpirom, Wanich Limwanich, Kanarat Nalampang, Praput Thavornyutikarn, Winita Punyodom & Puttinan Meepowpan. (2022) Scalable and Room-Temperature Ring-Opening Polymerization of ε-Caprolactone Catalyzed by Active Lithium Tetramethylene-Tethered Bis [ N -( N ′-butylimidazol-2-ylidene)] N -Heterocyclic Carbene as a Lewis Acid Organocatalyst . The Journal of Organic Chemistry 87:18, pages 12052-12064.
Crossref
Sara Liparoti, Stefania Mottola, Gianluca Viscusi, Raffaella Belvedere, Antonello Petrella, Giuliana Gorrasi, Roberto Pantani & Iolanda De Marco. (2022) Production of Mesoglycan/PCL Based Composites through Supercritical Impregnation. Molecules 27:18, pages 5800.
Crossref
Renata Bem dos Santos, Ana Claudia Funguetto-Ribeiro, Tamara Ramos Maciel, Dyenefer Pereira Fonseca, Fernanda Reis Favarin, Daniele Rubert Nogueira-Librelotto, Marcelo Gomes de Gomes, Tania Ueda Nakamura, Clarice Madalena Bueno Rolim & Sandra Elisa Haas. (2022) In vivo and in vitro per se effect evaluation of Polycaprolactone and Eudragit® RS100-based nanoparticles. Biomedicine & Pharmacotherapy 153, pages 113410.
Crossref
Sahid Mehmood, Haojie Yu, Li Wang, Md Alim Uddin, Bilal Ul Amin, Fazal Haq, Shah Fahad & Muhammad Haroon. (2022) Cross-Linked Poly(cyclotriphosphazene-co-phloretin) Microspheres and Their Application for Controlled Drug Delivery. Macromolecular Research 30:9, pages 623-630.
Crossref
Souradeep Mitra, Tarun Mateti, Seeram Ramakrishna & Anindita Laha. (2022) A Review on Curcumin-Loaded Electrospun Nanofibers and their Application in Modern Medicine. JOM 74:9, pages 3392-3407.
Crossref
Neha Raina, Rakesh Pahwa, Jasmine Kour Khosla, Prem N. Gupta & Madhu Gupta. (2021) Polycaprolactone-based materials in wound healing applications. Polymer Bulletin 79:9, pages 7041-7063.
Crossref
Agnes Chacor de Figueiredo, Javier Mauricio Anaya-Mancipe, Aline Oliveira da Silva de Barros, Ralph Santos-Oliveira, Marcos Lopes Dias & Rossana Mara da Silva Moreira Thiré. (2022) Nanostructured Electrospun Polycaprolactone—Propolis Mats Composed of Different Morphologies for Potential Use in Wound Healing. Molecules 27:16, pages 5351.
Crossref
Gholamhosein Kazemzadeh, Nafiseh Jirofti, Hosein Kazemi Mehrjerdi, Masoud Rajabioun, Seyed Ali Alamdaran, Davod Mohebbi-Kalhori, Mahnaz Sadat Mirbagheri & Reza Taheri. (2022) A review on developments of in-vitro and in-vivo evaluation of hybrid PCL-based natural polymers nanofibers scaffolds for vascular tissue engineering . Journal of Industrial Textiles 52, pages 152808372211283.
Crossref
Fatima El Zohra Aris, Aicha Hachemaouia, Ahmed Yahiaoui & Abdelkader Dehbi. (2022) Synthesis, Characterization, and Microbial Degradation Behavior of Hydrogel Based on Poly(ε-caprolactone) and Methacrylic Anhydride. Polymer Science, Series B 64:4, pages 417-428.
Crossref
Magdalena J. Bigaj-Józefowska & Bartosz F. Grześkowiak. (2022) Polymeric nanoparticles wrapped in biological membranes for targeted anticancer treatment. European Polymer Journal 176, pages 111427.
Crossref
Alma Martin, Jenny Natalie Nyman, Rikke Reinholdt, Jun Cai, Anna-Lena Schaedel, Mariena J. A. van der Plas, Martin Malmsten, Thomas Rades & Andrea Heinz. (2022) In Situ Transformation of Electrospun Nanofibers into Nanofiber-Reinforced Hydrogels. Nanomaterials 12:14, pages 2437.
Crossref
Petra Utroša, Špela Gradišar, Ozgun Can Onder, Ema Žagar & David Pahovnik. (2022) Synthetic Polypeptide–Polyester PolyHIPEs Prepared by Thiol–Ene Photopolymerization. Macromolecules 55:13, pages 5892-5900.
Crossref
Ankit Awasthi, Monica Gulati, Bimlesh Kumar, Jaskiran Kaur, Sukriti Vishwas, Rubiya Khursheed, Omji Porwal, Aftab Alam, Arya KR, Leander Corrie, Rajan Kumar, Ankit Kumar, Monika Kaushik, Niraj Kumar Jha, Piyush Kumar Gupta, Dinesh Kumar Chellappan, Gaurav Gupta, Kamal Dua, Saurabh Gupta, Rohit Gundamaraju, Pasupuleti Visweswara Rao & Sachin Kumar Singh. (2022) Recent Progress in Development of Dressings Used for Diabetic Wounds with Special Emphasis on Scaffolds. BioMed Research International 2022, pages 1-43.
Crossref
Jerome Antunes, Artur Ribeiro, Daniela Lemos, Teresa Miranda, Jorge Santos & Graça Soares. (2022) Exploring Nanofibers and Hydrogels as Collagenase Carriers for the Development of Advanced Wound Dressings. Materials Science Forum 1063, pages 43-55.
Crossref
Radek Jirkovec, Jakub Erben, Alzbeta Samkova, Jiri Chaloupek & Jiri Chvojka. (2022) The effect of the electrospinning setup on the surface energy of polycaprolactone nanofibre layers. Journal of Industrial Textiles 51:5_suppl, pages 8517S-8527S.
Crossref
Nafiseh Jirofti, Davod Mohebbi-Kalhori & Ramin Masoumi. (2020) Enhancing biocompatibility of PCL/PU nano-structures to control the water wettability by NaOH hydrolysis treatment for tissue engineering applications. Journal of Industrial Textiles 51:2_suppl, pages 3278S-3296S.
Crossref
Connor Quigley, Slesha Tuladhar & Ahasan Habib. (2022) A Roadmap to Fabricate Geometrically Accurate Three-Dimensional Scaffolds CO-Printed by Natural and Synthetic Polymers. Journal of Micro and Nano-Manufacturing 10:2.
Crossref
Alma Martin, Jun Cai, Anna-Lena Schaedel, Mariena van der Plas, Martin Malmsten, Thomas Rades & Andrea Heinz. (2022) Zein-polycaprolactone core–shell nanofibers for wound healing. International Journal of Pharmaceutics 621, pages 121809.
Crossref
Igor Paulino Mendes Soares, Caroline Anselmi, Fernanda Ali Kitagawa, Rafael Antonio de Oliveira Ribeiro, Maria Luísa Leite, Carlos Alberto de Souza Costa & Josimeri Hebling. (2022) Nano-hydroxyapatite-incorporated polycaprolactone nanofibrous scaffold as a dentin tissue engineering-based strategy for vital pulp therapy. Dental Materials 38:6, pages 960-977.
Crossref
J.L. Aparicio-Collado, N. García-San-Martín, J. Molina-Mateo, C. Torregrosa Cabanilles, V. Donderis Quiles, A. Serrano-Aroca & R. Sabater i Serra. (2022) Electroactive calcium-alginate/polycaprolactone/reduced graphene oxide nanohybrid hydrogels for skeletal muscle tissue engineering. Colloids and Surfaces B: Biointerfaces 214, pages 112455.
Crossref
Abd Rahim Aiman, Sevakumaran Vigneswari, Nur Athirah Amran, Vikneswaran Murugaiyah, Al-Ashraf Amirul & Seeram Ramakrishna. (2021) Advancing Regenerative Medicine Through the Development of Scaffold, Cell Biology, Biomaterials and Strategies of Smart Material. Regenerative Engineering and Translational Medicine 8:2, pages 298-320.
Crossref
R. Balan & V. Gayathri. (2021) In-vitro and antibacterial activities of novel POT/TiO2/PCL composites for tissue engineering and biomedical applications. Polymer Bulletin 79:6, pages 4269-4286.
Crossref
Rafał Podgórski, Michał Wojasiński & Tomasz Ciach. (2022) Nanofibrous materials affect the reaction of cytotoxicity assays. Scientific Reports 12:1.
Crossref
Elia Bari, Franca Scocozza, Sara Perteghella, Lorena Segale, Marzio Sorlini, Ferdinando Auricchio, Michele Conti & Maria Luisa Torre. (2022) Three-Dimensional Bioprinted Controlled Release Scaffold Containing Mesenchymal Stem/Stromal Lyosecretome for Bone Regeneration: Sterile Manufacturing and In Vitro Biological Efficacy. Biomedicines 10:5, pages 1063.
Crossref
Mohammad Foad Abazari, Sepehr Torabinejad, Shohreh Zare Karizi, Seyedeh Elnaz Enderami, Hadi Samadian, Nazanin Hajati-Birgani, Sara Norouzi, Fatemeh Nejati, Assil Al bahash & Vahid Mansouri. (2022) Promoted osteogenic differentiation of human induced pluripotent stem cells using composited polycaprolactone/polyvinyl alcohol/carbopol nanofibrous scaffold. Journal of Drug Delivery Science and Technology 71, pages 103318.
Crossref
Diana Querido, Tânia Vieira, José Luís Ferreira, Célia Henriques, João Paulo Borges & Jorge Carvalho Silva. (2022) Study on the Incorporation of Chitosan Flakes in Electrospun Polycaprolactone Scaffolds. Polymers 14:8, pages 1496.
Crossref
Matthew D. Flamini, Thamires Lima, Kerri Corkum, Nicolas J. Alvarez & Vince Beachley. (2022) Annealing post-drawn polycaprolactone (PCL) nanofibers optimizes crystallinity and molecular alignment and enhances mechanical properties and drug release profiles. Materials Advances 3:7, pages 3303-3315.
Crossref
Mia Arifka, Gofarana Wilar, Khaled M. Elamin & Nasrul Wathoni. (2022) Polymeric Hydrogels as Mesenchymal Stem Cell Secretome Delivery System in Biomedical Applications. Polymers 14:6, pages 1218.
Crossref
João Meneses, Tom van de Kemp, Raquel Costa-Almeida, Rúben Pereira, Fernão D. Magalhães, Miguel Castilho & Artur M. Pinto. (2022) Fabrication of Polymer/Graphene Biocomposites for Tissue Engineering. Polymers 14:5, pages 1038.
Crossref
J.Y. Quek, E. Uroro, N. Goswami & K. Vasilev. (2022) Design principles for bacteria-responsive antimicrobial nanomaterials. Materials Today Chemistry 23, pages 100606.
Crossref
Isabel Mayoral, Elisa Bevilacqua, Gorka Gómez, Abdelkrim Hmadcha, Ignacio González-Loscertales, Esther Reina, Julio Sotelo, Antonia Domínguez, Pedro Pérez-Alcántara, Younes Smani, Patricia González-Puertas, Ana Mendez, Sergio Uribe, Tarik Smani, Antonio Ordoñez & Israel Valverde. (2022) Tissue engineered in-vitro vascular patch fabrication using hybrid 3D printing and electrospinning. Materials Today Bio 14, pages 100252.
Crossref
Andressa G. Rosenberger, Michelly C.G. Pellá, Alessandra R. Medeiros, Fabiana da Silva Lima, Gabriel N. Fraga, Josiane Caetano & Douglas C. Dragunski. 2022. Nanoengineering of Biomaterials. Nanoengineering of Biomaterials 91 121 .
Damilola C. Akintayo, Wisdom A. Munzeiwa, Sreekantha B. Jonnalagadda & Bernard Omondi. (2022) Zn(II) pyridinyl amine complexes, synthesis and crystal structure studies: A comparative study of the effect of nuclearity and benzoate type on the ring-opening polymerization of cyclic esters. Polyhedron 213, pages 115589.
Crossref
Mohammad Foad Abazari, Sepehr Torabinejad, Shohreh Zare Karizi, Hadi Samadian, Sahar Jalili-ghelichi, Mehdi Norouzi, Hassan Askari, Vahdat Poortahmasebi, Seyedeh Elnaz Enderami & Fatemeh Soleimanifar. (2022) Biologically modified electrospun polycaprolactone nanofibrous scaffold promotes osteogenic differentiation. Journal of Drug Delivery Science and Technology 68, pages 103050.
Crossref
Delaram Babadi, Shahram Rabbani, Sarah Akhlaghi & Azadeh Haeri. (2022) Curcumin polymeric membranes for postoperative peritoneal adhesion: Comparison of nanofiber vs. film and phospholipid-enriched vs. non-enriched formulations. International Journal of Pharmaceutics 614, pages 121434.
Crossref
Francesca Antonella Sepúlveda, Julio Sánchez, Diego P. Oyarzun, Fidel E. Rodríguez-González, Alain Tundidor-Camba, Claudio García-Herrera, Paula A. Zapata, Guadalupe del C. Pizarro & Rudy Martin-Trasanco. (2021) Polycaprolactone and poly-β-cyclodextrin polymer blend: a Biopolymers composite film for drug release. Journal of Inclusion Phenomena and Macrocyclic Chemistry 102:1-2, pages 65-76.
Crossref
Megan M. Allyn, Richard H. Luo, Elle B. Hellwarth & Katelyn E. Swindle-Reilly. (2022) Considerations for Polymers Used in Ocular Drug Delivery. Frontiers in Medicine 8.
Crossref
Islam M. Adel, Mohamed F. ElMeligy & Nermeen A. Elkasabgy. (2022) Conventional and Recent Trends of Scaffolds Fabrication: A Superior Mode for Tissue Engineering. Pharmaceutics 14:2, pages 306.
Crossref
R. Ilyas, M. Zuhri, Mohd Norrrahim, Muhammad Misenan, Mohd Jenol, Sani Samsudin, N. Nurazzi, M. Asyraf, A. Supian, Sneh Bangar, R. Nadlene, Shubham Sharma & Abdoulhdi Omran. (2022) Natural Fiber-Reinforced Polycaprolactone Green and Hybrid Biocomposites for Various Advanced Applications. Polymers 14:1, pages 182.
Crossref
Abdalla Abdal-hay, Faheem A. Sheikh, N. Gómez-Cerezo, Abdulrahman Alneairi, Monis Luqman, Hem Raj Pant & Saso Ivanovski. (2022) A review of protein adsorption and bioactivity characteristics of poly ε-caprolactone scaffolds in regenerative medicine. European Polymer Journal 162, pages 110892.
Crossref
Abigail L. Eric, Adznila Eberahim & Clarence M. Ongkudon. 2022. Fundamentals of Bionanomaterials. Fundamentals of Bionanomaterials 217 240 .
Vaishnavi Hada, S.A.R. Hashmi, Medha Mili, Nikhil Gorhe, Sai Sateesh Sagiri, Kunal Pal, Rashmi Chawdhary, Manal Khan, Ajay Naik, N. Prashant, A.K. Srivastava & Sarika Verma. 2022. Food, Medical, and Environmental Applications of Nanomaterials. Food, Medical, and Environmental Applications of Nanomaterials 413 433 .
Emilia Utomo, Sarah A. Stewart, Camila J. Picco, Juan Domínguez-Robles & Eneko Larrañeta. 2022. Long-Acting Drug Delivery Systems. Long-Acting Drug Delivery Systems 17 59 .
Naga P.D. Dhanasekaran, Kirupa S. Muthuvelu & Senthil K. Arumugasamy. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers 795 809 .
Arnab Bhattacharjee & Monisha Chakraborty. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers 635 652 .
Renata Francielle Bombaldi de Souza & Ângela Maria Moraes. (2022) Hybrid bilayered chitosan-xanthan/PCL scaffolds as artificial periosteum substitutes for bone tissue regeneration. Journal of Materials Science 57:4, pages 2924-2940.
Crossref
Aman Bhardwaj & Lalit M. Pandey. 2022. Nanoscale Engineering of Biomaterials: Properties and Applications. Nanoscale Engineering of Biomaterials: Properties and Applications 89 114 .
Alazne Moreno-Lanceta, Mireia Medrano-Bosch, Elazer R. Edelman & Pedro Melgar-Lesmes. 2022. Pharmaceutical Nanobiotechnology for Targeted Therapy. Pharmaceutical Nanobiotechnology for Targeted Therapy 561 608 .
Paola I. Campa-Siqueiros, Maria M. Castillo-Ortega, Jaime López-Cervantes, Jesús Fernando Ayala-Zavala, David Servin de la Mora-López & Tomas J. Madera-Santana. 2022. Electrospun Nanofibers. Electrospun Nanofibers 207 249 .
Claire Bomkamp, Stacey C. Skaalure, Gonçalo F. Fernando, Tom Ben‐Arye, Elliot W. Swartz & Elizabeth A. Specht. (2021) Scaffolding Biomaterials for 3D Cultivated Meat: Prospects and Challenges. Advanced Science 9:3.
Crossref
Sagar Nilawar, Mohammad Uddin & Kaushik Chatterjee. (2021) Surface engineering of biodegradable implants: emerging trends in bioactive ceramic coatings and mechanical treatments. Materials Advances 2:24, pages 7820-7841.
Crossref
Albena Daskalova, Emil Filipov, Liliya Angelova, Radostin Stefanov, Dragomir Tatchev, Georgi Avdeev, Lamborghini Sotelo, Silke Christiansen, George Sarau, Gerd Leuchs, Ekaterina Iordanova & Ivan Buchvarov. (2021) Ultra-Short Laser Surface Properties Optimization of Biocompatibility Characteristics of 3D Poly-ε-Caprolactone and Hydroxyapatite Composite Scaffolds. Materials 14:24, pages 7513.
Crossref
Amanda Zimmerling, Zahra Yazdanpanah, David M. L. Cooper, James D. Johnston & Xiongbiao Chen. (2021) 3D printing PCL/nHA bone scaffolds: exploring the influence of material synthesis techniques. Biomaterials Research 25:1.
Crossref
Ferdi C Bayram, Mehmet F Kapçı, Adile Yuruk, Ismail A Isoglu & Burak Bal. (2021) Investigations of strain rate, size, and crack length effects on the mechanical response of polycaprolactone electrospun membranes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235:6, pages 1957-1970.
Crossref
Oseweuba Valentine Okoro, Andrew Amenaghawon, Daria Podstawczyk, Houman Alimoradi, Mohammad Reza Khalili, Mylene Anwar, Peiman Brouki Milan, Lei Nie & Amin Shavandi. (2021) Fruit pomace-lignin as a sustainable biopolymer for biomedical applications. Journal of Cleaner Production 328, pages 129498.
Crossref
Sonia Font Tellado, José Angel Delgado, Su Ping Patrina Poh, Wen Zhang, Maite García-Vallés, Salvador Martínez, Alejandro Gorustovich, Lizette Morejón, Martijn van Griensven & Elizabeth Rosado Balmayor. (2021) Phosphorous pentoxide-free bioactive glass exhibits dose-dependent angiogenic and osteogenic capacities which are retained in glass polymeric composite scaffolds. Biomaterials Science 9:23, pages 7876-7894.
Crossref
Joseph Batta-Mpouma, Gurshagan Kandhola, Patrick Kuczwara, Cody Chivers, Woochan Kim, Hanna Jensen, Jangho Kim, Morten Jensen & Jin-Woo Kim. (2021) Preparation and Characterization of Nanopatterned Polycaprolactone/Cellulose Nanocrystal Composite Membranes for Cardiovascular Tissue Engineering. Preparation and Characterization of Nanopatterned Polycaprolactone/Cellulose Nanocrystal Composite Membranes for Cardiovascular Tissue Engineering.
Arezoo Dadashzadeh, Saeid Moghassemi, Amin Shavandi & Christiani A. Amorim. (2021) A review on biomaterials for ovarian tissue engineering. Acta Biomaterialia 135, pages 48-63.
Crossref
Chao Huang, Min Yu, Hao Li, Xufeng Wan, Zichuan Ding, Weinan Zeng & Zongke Zhou. (2021) Research Progress of Bioactive Glass and Its Application in Orthopedics. Advanced Materials Interfaces 8:22.
Crossref
Roksana Bernat, Paulina Maksym, Magdalena Tarnacka, Katarzyna Malarz, Anna Mrozek-Wilczkiewicz, Tadeusz Biela, Sylwia Golba, Ewa Kamińska, Marian Paluch & Kamil Kamiński. (2021) High pressure as a novel tool for the cationic ROP of γ-butyrolactone. RSC Advances 11:55, pages 34806-34819.
Crossref
Sabrina Spiller, Tom Wippold, Kathrin Bellmann-Sickert, Sandra Franz, Anja Saalbach, Ulf Anderegg & Annette G. Beck-Sickinger. (2021) Protease-Triggered Release of Stabilized CXCL12 from Coated Scaffolds in an Ex Vivo Wound Model. Pharmaceutics 13:10, pages 1597.
Crossref
Mariia Gordienko, Elena Karakatenko, Natalia Menshutina, Marina Koroleva, Ilmira Gilmutdinova & Petr Eremin. (2021) Composites Composed of Hydrophilic and Hydrophobic Polymers, and Hydroxyapatite Nanoparticles: Synthesis, Characterization, and Study of Their Biocompatible Properties. Journal of Functional Biomaterials 12:4, pages 55.
Crossref
Sara Comini, Rosaria Sparti, Bartolomeo Coppola, Mehdi Mohammadi, Sara Scutera, Francesca Menotti, Giuliana Banche, Anna Maria Cuffini, Paola Palmero & Valeria Allizond. (2021) Novel Silver-Functionalized Poly(ε-Caprolactone)/Biphasic Calcium Phosphate Scaffolds Designed to Counteract Post-Surgical Infections in Orthopedic Applications. International Journal of Molecular Sciences 22:18, pages 10176.
Crossref
Robert Tonndorf, Dilbar Aibibu & Chokri Cherif. (2021) Isotropic and Anisotropic Scaffolds for Tissue Engineering: Collagen, Conventional, and Textile Fabrication Technologies and Properties. International Journal of Molecular Sciences 22:17, pages 9561.
Crossref
Haiping Lu, Yi Zhang, Shan Xiong, Yinghong Zhou, Lan Xiao, Yaping Ma, Yin Xiao & Xin Wang. (2021) Modulatory Role of Silver Nanoparticles and Mesenchymal Stem Cell–Derived Exosome-Modified Barrier Membrane on Macrophages and Osteogenesis. Frontiers in Chemistry 9.
Crossref
Piyush Kumar Gupta, Rekha Gahtori, Kavitha Govarthanan, Vineeta Sharma, Sreenath Pappuru, Soumya Pandit, Abhilasha Singh Mathuriya, Sunny Dholpuria & Dillip Kumar Bishi. (2021) Recent trends in biodegradable polyester nanomaterials for cancer therapy. Materials Science and Engineering: C 127, pages 112198.
Crossref
Hao Li, Pinxue Li, Zhen Yang, Cangjian Gao, Liwei Fu, Zhiyao Liao, Tianyuan Zhao, Fuyang Cao, Wei Chen, Yu Peng, Zhiguo Yuan, Xiang Sui, Shuyun Liu & Quanyi Guo. (2021) Meniscal Regenerative Scaffolds Based on Biopolymers and Polymers: Recent Status and Applications. Frontiers in Cell and Developmental Biology 9.
Crossref
Diara S. Kazybayeva, Galiya S. Irmukhametova & Vitaliy V. Khutoryanskiy. (2020) Synthesis of hydrolytically and oxidation‐responsive networks using thiol‐ene “click” chemistry with pentaerythritol tetrakis(3‐mercaptopropionate) and tri/tetra‐acrylates. Polymers for Advanced Technologies 32:7, pages 2682-2689.
Crossref
Daniela Dias, Ana C. Vale, Eunice P. F. Cunha, Maria C. Paiva, Rui L. Reis, Cedryck Vaquette & Natália M. Alves. (2020) 3D ‐printed cryomilled poly(ε‐caprolactone)/graphene composite scaffolds for bone tissue regeneration . Journal of Biomedical Materials Research Part B: Applied Biomaterials 109:7, pages 961-972.
Crossref
Navid Rabiee, Mojtaba Bagherzadeh, Amir Mohammad Ghadiri, Yousef Fatahi, Abdullah Aldhaher, Pooyan Makvandi, Rassoul Dinarvand, Maryam Jouyandeh, Mohammad Reza Saeb, Masoud Mozafari, Mohammadreza Shokouhimehr, Michael R. Hamblin & Rajender S. Varma. (2021) Turning Toxic Nanomaterials into a Safe and Bioactive Nanocarrier for Co-delivery of DOX/pCRISPR. ACS Applied Bio Materials 4:6, pages 5336-5351.
Crossref
Anas Ahmad, Md. Meraj Ansari, Rahul Kumar Verma & Rehan Khan. (2021) Aminocellulose-Grafted Polymeric Nanoparticles for Selective Targeting of CHEK2-Deficient Colorectal Cancer. ACS Applied Bio Materials 4:6, pages 5324-5335.
Crossref
Judyta Dulnik & Paweł Sajkiewicz. (2021) Crosslinking of Gelatin in Bicomponent Electrospun Fibers. Materials 14:12, pages 3391.
Crossref
Maria Elena Antinori, Marco Contardi, Giulia Suarato, Andrea Armirotti, Rosalia Bertorelli, Giorgio Mancini, Doriana Debellis & Athanassia Athanassiou. (2021) Advanced mycelium materials as potential self-growing biomedical scaffolds. Scientific Reports 11:1.
Crossref
Tianqi Nie, Wei Wang, Xiaohu Liu, Yanan Wang, Keyang Li, Xinyu Song, Jingwen Zhang, Liangmin Yu & Zhiyu He. (2021) Sustained Release Systems for Delivery of Therapeutic Peptide/Protein. Biomacromolecules 22:6, pages 2299-2324.
Crossref
Hao LiZhen YangLiwei FuZhiguo YuanCangjian GaoXiang SuiShuyun LiuJiang PengYongjing DaiQuanyi Guo. (2021) Advanced Polymer-Based Drug Delivery Strategies for Meniscal Regeneration. Tissue Engineering Part B: Reviews 27:3, pages 266-293.
Crossref
Amin Orash Mahmoud Salehi, Saeed Heidari Keshel, Farshid Sefat & Lobat Tayebi. (2021) Use of polycaprolactone in corneal tissue engineering: A review. Materials Today Communications 27, pages 102402.
Crossref
Parisa Haji Mohammadi Gohari, Masoumeh Haghbin Nazarpak & Mehran Solati-Hashjin. (2021) The effect of adding reduced graphene oxide to electrospun polycaprolactone scaffolds on MG-63 cells activity. Materials Today Communications 27, pages 102287.
Crossref
B. Sowmya, A. B. Hemavathi & P. K. Panda. (2021) Poly (ε-caprolactone)-based electrospun nano-featured substrate for tissue engineering applications: a review. Progress in Biomaterials 10:2, pages 91-117.
Crossref
M. Joana F. Pinheiro, Joana P. Costa, Fernanda Marques, Nuno P. Mira, M. Fernanda N. N. Carvalho & Marta M. Alves. (2021) Bioactive Coatings with Ag-Camphorimine Complexes to Prevent Surface Colonization by the Pathogenic Yeast Candida albicans. Antibiotics 10:6, pages 638.
Crossref
Shaima Maliha Riha, Manira Maarof & Mh Busra Fauzi. (2021) Synergistic Effect of Biomaterial and Stem Cell for Skin Tissue Engineering in Cutaneous Wound Healing: A Concise Review. Polymers 13:10, pages 1546.
Crossref
Majid Sharifi, Qian Bai, Mohammad Mahdi Nejadi Babadaei, Farhan Chowdhury, Mahbub Hassan, Akbar Taghizadeh, Hossein Derakhshankhah, Suliman Khan, Anwarul Hasan & Mojtaba Falahati. (2021) 3D bioprinting of engineered breast cancer constructs for personalized and targeted cancer therapy. Journal of Controlled Release 333, pages 91-106.
Crossref
Nadeem Siddiqui, Braja Kishori, Saranya Rao, Mohammad Anjum, Venkata Hemanth, Swati Das & Esmaiel Jabbari. (2021) Electropsun Polycaprolactone Fibres in Bone Tissue Engineering: A Review. Molecular Biotechnology 63:5, pages 363-388.
Crossref
Wei Lee Lim, Shiplu Roy Chowdhury, Min Hwei Ng & Jia Xian Law. (2021) Physicochemical Properties and Biocompatibility of Electrospun Polycaprolactone/Gelatin Nanofibers. International Journal of Environmental Research and Public Health 18:9, pages 4764.
Crossref
Beatriz Rossi Canuto de Menezes, Thaís Larissa do Amaral Montanheiro, Aline da Graça Sampaio, Cristiane Yumi Koga‐Ito, Gilmar Patrocínio Thim & Larissa Stieven Montagna. (2020) PCL / β‐AgVO 3 nanocomposites obtained by solvent casting as potential antimicrobial biomaterials . Journal of Applied Polymer Science 138:13.
Crossref
J. Avossa, G. Pota, G. Vitiello, A. Macagnano, A. Zanfardino, M. Di Napoli, A. Pezzella, G. D'Errico, M. Varcamonti & G. Luciani. (2021) Multifunctional mats by antimicrobial nanoparticles decoration for bioinspired smart wound dressing solutions. Materials Science and Engineering: C 123, pages 111954.
Crossref
Nergis Zeynep Renkler, Emre Ergene, Seyda Gokyer, Merve Tuzlakoglu Ozturk, Pinar Yilgor Huri & Kadriye Tuzlakoglu. (2021) Facile modification of polycaprolactone nanofibers with egg white protein. Journal of Materials Science: Materials in Medicine 32:4.
Crossref
Ruixiu Li, Yunmei Song, Paris Fouladian, Mohammad Arafat, Rosa Chung, Jarrod Kohlhagen & Sanjay Garg. (2021) Three-Dimensional Printing of Curcumin-Loaded Biodegradable and Flexible Scaffold for Intracranial Therapy of Glioblastoma Multiforme. Pharmaceutics 13:4, pages 471.
Crossref
M. Sai Bhargava Reddy, Deepalekshmi Ponnamma, Rajan Choudhary & Kishor Kumar Sadasivuni. (2021) A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds. Polymers 13:7, pages 1105.
Crossref
Katarzyna Czarnecka, Michał Wojasiński, Tomasz Ciach & Pawel Sajkiewicz. (2021) Solution Blow Spinning of Polycaprolactone—Rheological Determination of Spinnability and the Effect of Processing Conditions on Fiber Diameter and Alignment. Materials 14:6, pages 1463.
Crossref
Ahmed Al-Kattan, David Grojo, Christophe Drouet, Alexandros Mouskeftaras, Philippe Delaporte, Adrien Casanova, Jérôme D. Robin, Frédérique Magdinier, Patricia Alloncle, Catalin Constantinescu, Vincent Motto-Ros & Jörg Hermann. (2021) Short-Pulse Lasers: A Versatile Tool in Creating Novel Nano-/Micro-Structures and Compositional Analysis for Healthcare and Wellbeing Challenges. Nanomaterials 11:3, pages 712.
Crossref

Displaying 200 of 359 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.