Advanced search
Publication Cover
Tribology Transactions Volume 45, 2002 - Issue 3
Submit an article Journal homepage
807
Views
236
CrossRef citations to date
0
Altmetric
Original Articles

A Laser Surface Textured Hydrostatic Mechanical Seal

I. Etsion Technion, Dept. of Mechanical Engineering, Haifa, 32000, Israel
&
G. Halperin Technion, Dept. of Mechanical Engineering, Haifa, 32000, Israel
Pages 430-434 | Published online: 25 Mar 2008

Citations (236)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (17)

Anupam Alok, Satyajeet Kumar, Shailesh Mani Pandey & Amit Kumar. (2023) Review on the effect of surface textured tool in the field of machining. Advances in Materials and Processing Technologies 0:0, pages 1-19.
Read now
Mohammad Tauviqirrahman, Jamari Jamari, Muchammad Muchammad, Azis Ardiansyah, Budi Setiyana & Paryanto Paryanto. (2022) Hydrodynamic lubrication analysis of hydrophobic textured journal bearing considering cavitation. Cogent Engineering 9:1.
Read now
Tom W. Lai. (2020) Development of High Pressure–Velocity Contacting Plain Face Seals for Sealing Water. Tribology Transactions 63:3, pages 477-486.
Read now
Xingyu Liang, Xiaohui Wang, Yin Liu, Xu Wang, Gequn Shu & Zhijun Zhang. (2020) Simulation and Experimental Investigation on Friction Reduction by Partial Laser Surface Texturing on Piston Ring. Tribology Transactions 63:2, pages 371-381.
Read now
G. Boidi, I. S. Tertuliano, L. G. B. S. Lima, F. J. Profito & I. F. Machado. (2019) Porosity Effect of Sintered Steel on the Frictional Performance of Conformal and Nonconformal Lubricated Contacts. Tribology Transactions 62:6, pages 1029-1040.
Read now
A. Arslan, H. H. Masjuki, M. A. Kalam, M. Varman, R. A. Mufti, M. H. Mosarof, L. S. Khuong & M. M. Quazi. (2016) Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review. Critical Reviews in Solid State and Materials Sciences 41:6, pages 447-481.
Read now
N. Nuraliza, S. Syahrullail, D. M. Razak & C. S. N. Azwadi. (2016) Influence of micro-pits on sliding motion under low speeds for block-on-disk tribotester. Particulate Science and Technology 34:6, pages 754-763.
Read now
Linqing Bai & Shaoxian Bai. (2014) Frictional Performance of a Textured Surface with Elliptical Dimples: Geometric and Distribution Effects. Tribology Transactions 57:6, pages 1122-1128.
Read now
Mohammad Tauviqirrahman, Muchammad, Jamari & DikJ. Schipper. (2014) Numerical Study of the Load-Carrying Capacity of Lubricated Parallel Sliding Textured Surfaces including Wall Slip. Tribology Transactions 57:1, pages 134-145.
Read now
S. Kanmani Subbu, S. Dhamodaran & J. Ramkumar. (2012) Microelectric Discharge Plasma: Characterization and Applications. Materials and Manufacturing Processes 27:11, pages 1208-1212.
Read now
Shaoxian Bai, Xudong Peng & Linqing Bai. (2012) Experimental Investigation of an Inclined Ellipse Dimpled Gas Face Seal. Tribology Transactions 55:4, pages 512-517.
Read now
Jing Han, Liang Fang, Jiapeng Sun, Yanqing Wang, Shirong Ge & Hua Zhu. (2011) Hydrodynamic Lubrication of Surfaces with Asymmetric Microdimple. Tribology Transactions 54:4, pages 607-615.
Read now
M. Fesanghary & M.M. Khonsari. (2010) On Self-Adaptive Surface Grooves. Tribology Transactions 53:6, pages 871-880.
Read now
Gustavo C Buscaglia, Roberto F. Ausas & Mohammed Jai. (2006) Optimization tools in the analysis of micro-textured lubricated devices. Inverse Problems in Science and Engineering 14:4, pages 365-378.
Read now
G. RYK, Y. KLIGERMAN, I. ETSION & A. SHINKARENKO. (2005) Experimental Investigation of Partial Laser Surface Texturing for Piston-Ring Friction Reduction. Tribology Transactions 48:4, pages 583-588.
Read now
Andriy Kovalchenko, Oyelayo Ajayi, Ali Erdemir, George Fenske & Izhak Etsion. (2004) The Effect of Laser Texturing of Steel Surfaces and Speed-Load Parameters on the Transition of Lubrication Regime from Boundary to Hydrodynamic. Tribology Transactions 47:2, pages 299-307.
Read now
V. Brizmer, Y. Kligerman & I. Etsion. (2003) A Laser Surface Textured Parallel Thrust Bearing. Tribology Transactions 46:3, pages 397-403.
Read now

Articles from other publishers (219)

Hardik Gangadia & Saurin Sheth. (2023) The Effect of Star Shaped Dimples on Sliding Surfaces under Hydrodynamic Lubrication. Tribology Online 18:7, pages 457-468.
Crossref
Shaopeng Ding, Yusheng Hu, Huijun Wei, Di Mu, Xiangzhi Zhan, Jun Wang, Ouxiang Yang & Jia Xu. (2023) The Tribological Behavior of Cast Iron by Laser Surface Texturing under Oil-Lubricated Initial Line Contact for Rotary Compressor. Lubricants 11:11, pages 486.
Crossref
Igal Cohen & Roman Goltsberg. (2023) Partial Surface Texturing in Hydrodynamic Lubrication: A CFD-Based Investigation. Lubricants 11:9, pages 395.
Crossref
Gopakumar Parameswaran, Vikram Jayaram & Satish V. Kailas. (2023) Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding. Lubricants 11:9, pages 354.
Crossref
Haniff A Rahman, Jaharah A Ghani, Wan Mohd Faizal Wan Mahmood, Mohammad Rasidi Rasani & Nabil Jouini. (2023) Hydrodynamic performance study of a dimple textured surface at various area ratios and sliding speeds using CFD. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237:8, pages 1632-1646.
Crossref
Mingxia Kang, Dezheng Hua & Xiaoqiang Guo. (2023) Study on the Influence of Micro-Features in the Surface Topography of the Slider Raceway on the Dynamic Friction Factor of the Guide Rail Pair. Lubricants 11:8, pages 321.
Crossref
Venkateswara Babu Peddakondigalla, Vasavi Boggarapu, Rajani Doppalapudi, Lakshmi Sunitha Vikram, K J Lakshmi Narayana, Syam Kumar Chokka & Ismail Syed. (2023) Friction and wear performance of surface textured bearing steel AISI 52100: a study of texture distribution. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Konstantin Gavrilov, Yuriy Rozhdestvenskii & Ildar Umurzakov. (2023) A Method for Mathematical Modeling of Hydrodynamic Friction of Plunger Pairs with Consideration of Microgeometry. Mathematics 11:12, pages 2637.
Crossref
Ramana Reddy Annadi & Ismail Syed. (2023) Impact of multi-scaled surface textures on tribological performance of parallel sliding contact under lubricated condition. Tribology International 183, pages 108415.
Crossref
Yifan Dai, Zefei Tan, Wengang Chen, Dongyang Li, Jubang Zhang, Zexiao Wang, Yukun Mao, Yuhao Wang & Wenxuan Guo. (2023) Effect of Salt Bath Nitriding and Reoxidation Composite Texture on Frictional Properties of Valve Steel 4Cr10Si2Mo. Coatings 13:4, pages 776.
Crossref
Shaopeng Ding, Huijun Wei, Ouxiang Yang, Liying Deng & Di Mu. (2023) Tribological behaviors of laser textured surface under different lubrication conditions for rotary compressor. Scientific Reports 13:1.
Crossref
Zhicheng Shen, Yao Yao, Qiliang Wang, Lin Lu & Hongxing Yang. (2023) A novel micro power generation system to efficiently harvest hydroelectric energy for power supply to water intelligent networks of urban water pipelines. Energy 268, pages 126694.
Crossref
Wen-Xuan Li, Yan Liu, Hai-Tao Duan, Yi-Han Wang, Sheng-Peng Zhan, Wu-Lin Zhang, Tian Yang, Guo-Zheng Li & Jia Dan. (2023) Effect of laser texturing bulges on tribological properties of 316L stainless steel. Surface Topography: Metrology and Properties 11:1, pages 015004.
Crossref
Zhenhua Li, Mutellip Ahmat, Quanyi Zhang & Huafeng Zhou. (2023) Analysis of Contact Characteristics of Rough Surface/Microporous For Flat Friction Pair. Journal of Physics: Conference Series 2459:1, pages 012048.
Crossref
Huanhuan Wang, Naiming Lin, Shuo Yuan, Zhiqi Liu, Yuan Yu, Qunfeng Zeng, Dongyang Li, Jianfeng Fan & Yucheng Wu. (2023) Numerical simulation on hydrodynamic lubrication performance of bionic multi-scale composite textures inspired by surface patterns of subcrenata and clam shells. Tribology International 181, pages 108335.
Crossref
Jimin Xu, Ning Liu, Fang Zhang, Jun Du, Cheng Zheng, Xin Gao & Kun Liu. (2023) Frictional Behaviors of 3D-Printed Polylactic Acid Components With Spiral-Groove Surface Textures Under Oil Lubrication. Journal of Tribology 145:1.
Crossref
Guangqiang Shi, Xiaodong Yu, Hui Meng, Feihu Zhao, Junfeng Wang, Jianhua Jiao & Hui Jiang. (2023) Effect of surface modification on friction characteristics of sliding bearings: A review. Tribology International 177, pages 107937.
Crossref
O. V. Zhdaneev, A. V. Zaitsev, S. V. Kolesnikov & A. I. Soshnikov. (2022) Development of the Production of Russian Bearings for the Fuel and Energy Complex. Journal of Machinery Manufacture and Reliability 51:7, pages 676-684.
Crossref
Junhui Zhang, Yining Shen, Minyao Gan, Qi Su, Fei Lyu, Bing Xu & Yuan Chen. (2022) Multi-objective optimization of surface texture for the slipper/swash plate interface in EHA pumps. Frontiers of Mechanical Engineering 17:4.
Crossref
Max Marian, Andreas Almqvist, Andreas Rosenkranz & Michel Fillon. (2022) Numerical micro-texture optimization for lubricated contacts—A critical discussion. Friction 10:11, pages 1772-1809.
Crossref
Keyang Chen, Xuefeng Yang, Guojie Lv, Yifeng Zhang, Hui Yang & Yalong Gao. (2022) Research progress of surface modification and solid–liquid lubrication synergistic friction reduction and wear resistance. The International Journal of Advanced Manufacturing Technology 122:3-4, pages 1115-1141.
Crossref
Amani Khaskhoussi, Giacomo Risitano, Luigi Calabrese & Danilo D’Andrea. (2022) Investigation of the Wettability Properties of Different Textured Lead/Lead-Free Bronze Coatings. Lubricants 10:5, pages 82.
Crossref
Bogdan Antoszewski & Piotr Kurp. (2022) Effect of Surface Texture on the Sliding Pair Lubrication Efficiency. Lubricants 10:5, pages 80.
Crossref
Pranav Dev Srivyas, M F Wani, Rakesh Sehgal, Chandra Shekhar Singh Bisht, M.S. Charoo, Ankush Raina & Mir Irfan Ul Haq. (2022) Synergetic effect of surface texturing and graphene nanoplatelets on the tribological properties of hybrid self-lubricating composite. Tribology International 168, pages 107434.
Crossref
Fuying Zhang & Yuanhao Zhang. (2022) Research on lubrication and friction characteristics of oil seal with isosceles triangle texture and micro concave lip. Industrial Lubrication and Tribology 74:2, pages 171-177.
Crossref
Simone Balestra, Gianluca Costagliola, Amedeo Pegoraro, Federico Picollo, Jean-François Molinari, Nicola M. Pugno, Ettore Vittone, Federico Bosia & Agusti Sin. (2022) Experimental and Numerical Study of the Effect of Surface Patterning on the Frictional Properties of Polymer Surfaces. Journal of Tribology 144:3.
Crossref
Chengyi Pan, Jiahao Chang, Chuan Wang & Yanguang Gu. (2022) Study on microstructure wear reduction performance and life prediction of unfolding wheel. Journal of Mechanical Science and Technology 36:3, pages 1397-1405.
Crossref
S. Kunar & D.V. Janaki. (2022) Micropatterning on stainless steel surface using electrochemical micromachining. Materials Today: Proceedings 62, pages 6450-6454.
Crossref
Yusheng Niu, Xiuqing Hao, Annan Xia, Li Wang, Qiankai Liu, Liang Li & Ning He. (2021) Effects of textured surfaces on the properties of hydrodynamic bearing. The International Journal of Advanced Manufacturing Technology 118:5-6, pages 1589-1596.
Crossref
Yongsheng Zhang, Hengzhong Fan, Litian Hu, Yuan Fang & Junjie Song. 2022. Self-Lubricating Composites. Self-Lubricating Composites 241 260 .
Linqing Bai, Pengcheng Zhang & Zulfiqar Ahmad Khan. (2021) Semi Salix Leaf Textured Gas Mechanical Face Seal with Enhanced Opening Performance. Materials 14:24, pages 7522.
Crossref
Sartaj Singh, Saurabh Kango, Nitin Sharma & Rajeev Verma. (2021) Recent advances in the mechanical durability of superamphiphobic surfaces: A review. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235:11, pages 2474-2499.
Crossref
Hongbo Zou, Shuai Yan, Tong Shen, Haoji Wang, Yining Li, Jingyue Chen, Yaqi Meng, Shichao Men, Zhongjiang Zhang, Tianyi Sui & Bin Lin. (2021) Efficiency of surface texturing in the reducing of wear for tests starting with initial point contact. Wear 482-483, pages 203957.
Crossref
Keyang Chen, Xuefeng Yang, Yifeng Zhang, Hui Yang, Guojie Lv & Yalong Gao. (2021) Research progress of improving surface friction properties by surface texture technology. The International Journal of Advanced Manufacturing Technology 116:9-10, pages 2797-2821.
Crossref
Linqing Bai, Jianxin Sun, Pengcheng Zhang & Zulfiqar Ahmad Khan. (2021) Friction Behavior of a Textured Surface against Several Materials under Dry and Lubricated Conditions. Materials 14:18, pages 5228.
Crossref
Michal Michalec, Petr Svoboda, Ivan Křupka & Martin Hartl. (2021) A review of the design and optimization of large-scale hydrostatic bearing systems. Engineering Science and Technology, an International Journal 24:4, pages 936-958.
Crossref
Jinlong Shen, Tong Zhang, Jimin Xu, Xiaojun LIU & Kun Liu. (2021) Experimental study on friction coefficient and temperature rise of heavy-load grease-lubricated spherical plain bearings with surface texture. Industrial Lubrication and Tribology 73:3, pages 536-542.
Crossref
Limin Meng, Junpeng Ding & Yingjian Shi. (2021) Influence of micro groove on the tribological properties of PDMS friction pairs. Influence of micro groove on the tribological properties of PDMS friction pairs.
Hiba Jendoubi, Olga Smerdova & Noël Brunetière. (2021) Unexpected Frictional Behavior of Laser-Textured Hydrophobic Surfaces. Lubricants 9:3, pages 31.
Crossref
Andreas Rosenkranz, Henara L. Costa, Mehmet Z. Baykara & Ashlie Martini. (2021) Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – A review. Tribology International 155, pages 106792.
Crossref
Shaopeng Ding, Jia Xu, Pengfei Liu, Zhengliang Shi, Ouxiang Yang & Yuanpei Hu. (2021) Geometric influence on friction and wear performance of cast iron with a micro-dimpled surface. Results in Engineering 9, pages 100211.
Crossref
Hekun Jia, Zeyuan Zhou, Bifeng Yin, Huiqin Zhou & Bo Xu. (2020) Effect of compound texture on lubrication and sealing performance of plunger pump. Lubrication Science 33:2, pages 43-59.
Crossref
Fuying Zhang & Yuanhao Zhang. (2020) Research on sealing performance of oil seals with micro-dimple texture on lips. Industrial Lubrication and Tribology 73:1, pages 113-119.
Crossref
Kazuyuki Yagi, Wataru Matsunaka & Joichi Sugimura. (2021) Impact of textured surfaces in starved hydrodynamic lubrication. Tribology International 154, pages 106756.
Crossref
Zihan Shen, Fengchao Wang, Zhiguo Chen, Xiaopeng Ruan, Hanghang Zeng, Jiahui Wang, Yurong An & Xiaoli Fan. (2021) Numerical simulation of lubrication performance on chevron textured surface under hydrodynamic lubrication. Tribology International 154, pages 106704.
Crossref
Ishwer Shivakoti, Golam Kibria, Robert Cep, Bal Bahadur Pradhan & Ashis Sharma. (2021) Laser Surface Texturing for Biomedical Applications: A Review. Coatings 11:2, pages 124.
Crossref
Hisham Abdel-Aal. 2021. Inspiration and Design for Bio-Inspired Surfaces in Tribology. Inspiration and Design for Bio-Inspired Surfaces in Tribology 161 187 .
P. Krishna Kumar, D. Nithishkumar, V. Kevin Gabriel, J. R. Jerbin & J. Joel Joseph. Experimental study on frictional characteristics of alumina surface through biologically inspired catfish and shark fish scale like laser textures under dry and lubricating condition. Experimental study on frictional characteristics of alumina surface through biologically inspired catfish and shark fish scale like laser textures under dry and lubricating condition.
S. Prakash, C. Sasikumar, S. Aravind, V. Mohan Prasath & C. Udhayakumar. 2021. Advances in Materials Research. Advances in Materials Research 943 952 .
K. Gavrilov, N. Khozeniuk & M. Izzatulloev. 2021. Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020). Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) 1131 1138 .
M. Muchammad, Mohammad Tauviqirrahman, J. Jamari & D. J. Schipper. (2020) Analysis of the Effect of the Slip-Pocket in Single and Double Parallel Bearing Considering Cavitation: A Theoretical Approach. Lubricants 9:1, pages 3.
Crossref
Ping Lu & Robert J K Wood. (2020) Tribological performance of surface texturing in mechanical applications—a review. Surface Topography: Metrology and Properties 8:4, pages 043001.
Crossref
Abdullah Azam, Abdel Dorgham, Doris Nekesa Khaemba, Farnaz Motamen Salehi, TianLong See & Anne Neville. (2020) Understanding the role of surface textures in improving the performance of boundary additives, part II: Numerical simulations. Tribology International 152, pages 106252.
Crossref
Juan Chen, Liangcai Zeng, Min Yang & Wenting Guo. (2020) Experimental study of lubrication performance of partially/fully textured surface. Journal of Physics: Conference Series 1699, pages 012028.
Crossref
Niranjan Singh & RK Awasthi. (2020) Influence of dimple location and depth on the performance characteristics of the hydrodynamic journal bearing system. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 234:9, pages 1500-1513.
Crossref
Hui Zhang, Yang Liu, Mahshid Hafezi, Meng Hua & Guang-neng Dong. (2020) A distribution design for circular concave textures on sectorial thrust bearing pads. Tribology International 149, pages 105733.
Crossref
G. Boidi, I.S. Tertuliano, F.J. Profito, W. de Rossi & I.F. Machado. (2020) Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions. Tribology International 149, pages 105613.
Crossref
M.-P. Noutary, N. Biboulet & A.A. Lubrecht. (2020) Dimple influence on load carrying capacity of parallel surfaces. Tribology International 149, pages 105452.
Crossref
Luanxia Chen, Zhanqiang Liu & Wengang Song. (2020) Process-surface morphology-tribological property relationships for H62 brass employing various manufacturing approaches. Tribology International 148, pages 106320.
Crossref
Fanming Meng, Ruihong Shu & Lin Chen. (2019) Influences of operation parameters on noise of journal bearing with compound texture considering lubricant thermal effect. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 234:7, pages 991-1006.
Crossref
Doris Nekesa Khaemba, Abdullah Azam, TianLong See, Anne Neville & Farnaz Motamen Salehi. (2020) Understanding the role of surface textures in improving the performance of boundary additives, part I: Experimental. Tribology International 146, pages 106243.
Crossref
Pixiang Lan, Reza Gheisari, Jacob L. Meyer & Andreas A. Polycarpou. (2020) Surface Micro-texturing by Hot Sintering for Advanced Bearing Polymers for Friction Reduction Under Boundary Lubrication. International Journal of Precision Engineering and Manufacturing 21:6, pages 1025-1034.
Crossref
Cheng Liu, Yanjun Lu, Yongfang Zhang, Sha Li, Ang Chen, Jianxiong Kang & Norbert Müller. (2020) Effect of surface texture on the improvement of tribological performance of ring‐deformed liner conjunction under different oil supplies. Lubrication Science 32:4, pages 145-168.
Crossref
Keying Chen, Liangcai Zeng, Feilong Zheng, Juan Chen & Xianzhong Ding. (2020) Effects of distribution density and location of subsurface particles on elastohydrodynamic lubrication. AIP Advances 10:5.
Crossref
Gabriel Welfany Rodrigues & Marco Lucio Bittencourt. (2020) Surface virtual texturing of the journal bearings of a three-cylinder ethanol engine. Industrial Lubrication and Tribology 72:9, pages 1059-1073.
Crossref
Dennis Keller, Georg Jacobs & Stephan Neumann. (2020) Development of a Low-Friction Radial Shaft Seal: Using CFD Simulations to Optimise the Microstructured Sealing Lip. Lubricants 8:4, pages 41.
Crossref
Rui Zhou, Zi Zhang & Minghui Hong. (2020) The art of laser ablation in aeroengine: The crown jewel of modern industry. Journal of Applied Physics 127:8.
Crossref
Yang Mao & Zhongwei Yin. (2019) Modeling and experiments of cavitation on a pocket-textured surface. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 234:1, pages 94-103.
Crossref
Juan Chen, Liangcai Zeng, Yan Lu, Kuisheng Chen & Congchang Zhan. (2019) Experimental investigation of effect of the surface texture configuration on hydrodynamic performance under oil lubricated rotating condition. IOP Conference Series: Materials Science and Engineering 631:3, pages 032014.
Crossref
Songbo Wei, Hongfei Shang, Chenglong Liao, Junyuan Huang & Bairu Shi. (2019) Tribology Performance of Surface Texturing Plunger. Biomimetics 4:3, pages 54.
Crossref
Andreas Rosenkranz, Philipp G. Grützmacher, Carsten Gachot & Henara L. Costa. (2019) Surface Texturing in Machine Elements − A Critical Discussion for Rolling and Sliding Contacts. Advanced Engineering Materials 21:8.
Crossref
Priya Ranjan & Somashekhar S. Hiremath. (2019) Role of textured tool in improving machining performance: A review. Journal of Manufacturing Processes 43, pages 47-73.
Crossref
Chen Gao, Wei Wu, Xin Jun Wang & Bin Xu. (2019) Metal Surface Texture Research on the Influence of Friction. Materials Science Forum 956, pages 144-153.
Crossref
D. Nazeer Basha, G. Padmanabham & Ravi Bathe. (2019) Tribological Behavior of Surface Textured Gray Cast Iron at Different Texture Density by Ultrafast Laser. Materials Performance and Characterization 8:6, pages 20180092.
Crossref
Minghuan Wang, Yaobin Zhang, Xufeng Xu, Guoda Chen, Adam T Clare & Nuhaize Ahmed. (2018) Effects of tool intermittent vibration on helical internal hole processing in electrochemical machining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233:12, pages 4102-4111.
Crossref
Haniff Abdul Rahman, Jaharah A. Ghani, Wan Mohd Faizal Wan Mahmood & Mohammad Rasidi Mohammad Rasani. (2019) Computational fluid dynamic study on the tribological performance of dimple-textured surface fabricated using the turning process. Industrial Lubrication and Tribology 71:4, pages 594-602.
Crossref
Dong-Ni Liu, Zhi-Jun Yan, Xue-Liang Yan, Xun Fang, Xin-He Zhu, Dong Cheng & Cheng Xue. (2019) The simulation of asymmetric micro-textures on the lubrication characteristics of sliding friction pairs. IOP Conference Series: Earth and Environmental Science 240, pages 062019.
Crossref
Chao Gui & Fanming Meng. (2018) Comparative study of spherical dimple and bump effects on the tribological performances of journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233:1, pages 139-157.
Crossref
Yinghui Zhong, Long Zheng, Yihang Gao & Zhenning Liu. (2019) Numerical simulation and experimental investigation of tribological performance on bionic hexagonal textured surface. Tribology International 129, pages 151-161.
Crossref
Yuan-Zhong Hu & Tian-Bao Ma. 2019. Comprehensive Nanoscience and Nanotechnology. Comprehensive Nanoscience and Nanotechnology 309 342 .
Md. Rashef Mahbub & Muhammad P. Jahan. 2019. Micro and Nano Machining of Engineering Materials. Micro and Nano Machining of Engineering Materials 33 63 .
Juan Chen, Liangcai Zeng, Zhenpeng Wu & Kuisheng Chen. (2018) Experimental investigation of disc partial surface texture on the generation of hydrodynamic lubricating performance under conformal contact condition. AIP Advances 8:12.
Crossref
Hui Zhang, Yang Liu, Meng Hua, Dong-ya Zhang, Li-guo Qin & Guang-neng Dong. (2018) An optimization research on the coverage of micro-textures arranged on bearing sliders. Tribology International 128, pages 231-239.
Crossref
Koki Ishida, Masahiro Fujii, Jun Hwi Cho & Kevin Pittel. Effects of the Metal Surface Profile to the Sliding Properties between Rubber and Metal and Applying That to Wheel Bearing Seals. Effects of the Metal Surface Profile to the Sliding Properties between Rubber and Metal and Applying That to Wheel Bearing Seals.
Yuan Ma, Yanzhong Li, Fushou Xie, Lei Wang & Kang Zhu. (2018) Numerical investigation on sealing behaviors of an extremely high-speed two-stage impellers structure in cryogenic rockets. Asia-Pacific Journal of Chemical Engineering 13:5, pages e2229.
Crossref
Philip Varney & Itzhak Green. (2017) Dynamic modeling of an eccentric face seal including coupled rotordynamics, face contact, and inertial maneuver loads. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 232:6, pages 732-748.
Crossref
Yanxiang Han & Yonghong Fu. (2017) Investigation of surface texture influence on hydrodynamic performance of parallel slider bearing under transient condition. Meccanica 53:8, pages 2053-2066.
Crossref
Carsten Gachot, Philipp Grützmacher & Andreas Rosenkranz. (2018) Laser Surface Texturing of TiAl Multilayer Films—Effects of Microstructure and Topography on Friction and Wear. Lubricants 6:2, pages 36.
Crossref
Shiuh-Hwa Shyu & Wei-Chun Hsu. (2018) A numerical study on the negligibility of cross-film pressure variation in infinitely wide plane slider bearing, Rayleigh step bearing and micro-grooved parallel slider bearing. International Journal of Mechanical Sciences 137, pages 315-323.
Crossref
Hiroyuki Yamada, Hiroo Taura & Satoru Kaneko. (2018) Numerical and Experimental Analyses of the Dynamic Characteristics of Journal Bearings With Square Dimples. Journal of Tribology 140:1.
Crossref
Muchammad, Mohammad Tauviqirrahman, Rizqy Amanullah Akbar, Fuad Hilmy & Jamari. (2018) The effect of textured surfaces on the hydrodynamic pressure generation in journal bearings. MATEC Web of Conferences 204, pages 04006.
Crossref
Davinder Singh, Navneet Singh & RK Awasthi. (2018) Effect of surface texture parameters on the performance of finite slider bearing. Materials Today: Proceedings 5:9, pages 19349-19358.
Crossref
Yongsheng Zhang, Hengzhong Fan, Litian Hu, Yuan Fang & Junjie Song. 2018. Self-Lubricating Composites. Self-Lubricating Composites 231 250 .
Linqing Bai, Yonggang Meng, Zulfiqar Ahmad Khan & Varian Zhang. (2017) The Synergetic Effects of Surface Texturing and MoDDP Additive Applied to Ball-on-Disk Friction Subject to Both Flooded and Starved Lubrication Conditions. Tribology Letters 65:4.
Crossref
G. Boidi, I. S. Tertuliano, M.F. Cano, G.A.A. Machado, R.M. Souza & I.F. Machado. Tribological Evaluation of Sintered and Conventional Gear Materials. Tribological Evaluation of Sintered and Conventional Gear Materials.
Philip Varney & Itzhak Green. (2017) Steady-State Response of a Flexibly Mounted Stator Mechanical Face Seal Subject to Dynamic Forcing of a Flexible Rotor. Journal of Tribology 139:6.
Crossref
L. M. Vilhena, A. Ramalho & A. Cavaleiro. (2017) Grooved surface texturing by electrical discharge machining (EDM) under different lubrication regimes. Lubrication Science 29:7, pages 493-501.
Crossref
Nicholas J Morris, Ramin Rahmani & Homer Rahnejat. (2017) A hydrodynamic flow analysis for optimal positioning of surface textures. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231:9, pages 1140-1150.
Crossref
Hiroyuki YamadaHiroo TauraSatoru Kaneko. (2017) Static Characteristics of Journal Bearings With Square Dimples. Journal of Tribology 139:5.
Crossref
Morteza Taee, Amir Torabi, Saleh Akbarzadeh, M. M. Khonsari & Mohsen Badrossamay. (2017) On the Performance of EHL Contacts with Textured Surfaces. Tribology Letters 65:3.
Crossref
K. Tripathi, G. Gyawali, B. Joshi, A. Amanov & S. Wohn. (2017) Improved Tribological Behavior of Grey Cast Iron Under Low and High Viscous Lubricants by Laser Surface Texturing. Materials Performance and Characterization 6:2, pages MPC20160020.
Crossref
J. Voyer, F. Ausserer, S. Klien, A. Ristow, I. Velkavrh, A. Diem, J. Zehetner, S. Stroj, S. Heidegger, C. Bertschler & J. Edlinger. (2017) Sub-Micro Laser Modifications of Tribological Surfaces. Materials Performance and Characterization 6:2, pages MPC20160015.
Crossref
A. M. Kovalchenko, A. Erdemir, O. O. Ajayi & I. Etsion. (2017) Tribological Behavior of Oil-Lubricated Laser Textured Steel Surfaces in Conformal Flat and Non-Conformal Contacts. Materials Performance and Characterization 6:2, pages MPC20160013.
Crossref
Mariyam Jameelah Ghazali, Ahmad Firdaus Shamsul Baharin, Juyana A. Wahab & Andanastuti Muchtar. (2017) Erosive wear resistance of dimpled ceramic coatings on mild steels. Industrial Lubrication and Tribology 69:3, pages 404-408.
Crossref
M. Muchammad, Mohammad Tauviqirrahman, J. Jamari & Dirk Jan Schipper. (2017) An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation. Lubrication Science 29:3, pages 133-152.
Crossref
Meiling Wang, Changtao Zhang & Xiaolei Wang. (2017) The Wear Behavior of Textured Steel Sliding against Polymers. Materials 10:4, pages 330.
Crossref
Wengang Chen, Xueyuan Liu & Lili Zheng. (2017) Study on the friction characteristics of 304 steel with composite surface modification. Industrial Lubrication and Tribology 69:2, pages 248-258.
Crossref
Philip Varney & Itzhak Green. (2017) Impact Phenomena in a Noncontacting Mechanical Face Seal. Journal of Tribology 139:2.
Crossref
Patrick A. Smyth & Itzhak Green. (2016) Analysis of Coupled Poroviscoelasticity and Hydrodynamic Lubrication. Tribology Letters 65:1.
Crossref
Renjie Ji, Yonghong Liu, Chenchen Xu, Xiaopeng Li, Baoping Cai & Yanzhen Zhang. (2016) Novel method for the hybrid composite electroplating of the upstream pumping mechanical seal. The International Journal of Advanced Manufacturing Technology 89:5-8, pages 1875-1886.
Crossref
C. Gachot, A. Rosenkranz, S.M. Hsu & H.L. Costa. (2017) A critical assessment of surface texturing for friction and wear improvement. Wear 372-373, pages 21-41.
Crossref
Kazuyuki Yagi & Joichi Sugimura. (2017) Performance of Balancing Wedge Action in Textured Hydrodynamic Pad Bearings. Journal of Tribology 139:1.
Crossref
Hui Zhang, Guang-neng Dong, Meng Hua & Kwai-Sang Chin. (2017) Improvement of Tribological Behaviors by Optimizing Concave Texture Shape Under Reciprocating Sliding Motion. Journal of Tribology 139:1.
Crossref
S. Shankar & P. Krishna Kumar. (2017) Frictional characteristics of diamond like carbon and tungsten carbide/carbon coated high carbon high chromium steel against carbon in dry sliding conformal contact for mechanical seals. Mechanics & Industry 18:1, pages 115.
Crossref
Kishor Kumar Gajrani & M. Ravi Sankar. (2017) State of the art on micro to nano textured cutting tools. Materials Today: Proceedings 4:2, pages 3776-3785.
Crossref
Ma Chenbo. (2016) Experimental study on tribological property of mechanical seals with changeable pore diameter. Functional Materials 23:4, pages 587-591.
Crossref
Fan Jin, Qiang Wan & Xu Guo. (2016) A double-Westergaard model for adhesive contact of a wavy surface. International Journal of Solids and Structures 102-103, pages 66-76.
Crossref
Xuhui Zhou, Zhenglin Liu, Li Zou, Xingxin Liang, Huanjie Wang & Jun Yang. (2016) Research on Sealing Properties and its Influence Factors of Spherical Mechanical Seal Based on ANSYS. The Open Mechanical Engineering Journal 10:1, pages 160-172.
Crossref
Xiao Su, Liping Shi, Wei Huang & Xiaolei Wang. (2016) A multi-phase micro-abrasive jet machining technique for the surface texturing of mechanical seals. The International Journal of Advanced Manufacturing Technology 86:5-8, pages 2047-2054.
Crossref
Chenbo Ma, Weifeng Gu, Qiaoan Tu, Jianjun Sun & Bo Yu. (2016) Experimental investigation on frictional property of mechanical seals with varying dimple diameter along the radial face. Advances in Mechanical Engineering 8:8, pages 168781401666483.
Crossref
Song Xu, Sam Oh Jin An, Danno Atsushi & Sylvie Castagne. (2016) Development of low-cost deformation-based micro surface texturing system for friction reduction. International Journal of Precision Engineering and Manufacturing 17:8, pages 1059-1065.
Crossref
P Cuervo, D A López, J P Cano, J C Sánchez, S Rudas, H Estupiñán, A Toro & H A Abdel-Aal. (2016) Development of low friction snake-inspired deterministic textured surfaces. Surface Topography: Metrology and Properties 4:2, pages 024013.
Crossref
Liping Shi, Xiuying Wang, Xiao Su, Wei Huang & Xiaolei Wang. (2016) Comparison of the Load-Carrying Performance of Mechanical Gas Seals Textured With Microgrooves and Microdimples. Journal of Tribology 138:2.
Crossref
Yuli Huang & Richard F. Salant. (2016) Simulation of a hydraulic rod seal with a textured rod and starvation. Tribology International 95, pages 306-315.
Crossref
Ahmad Firdaus Shamsul Baharin, Mariyam Jameelah Ghazali & Juyana A Wahab. (2016) Laser surface texturing and its contribution to friction and wear reduction: a brief review. Industrial Lubrication and Tribology 68:1, pages 57-66.
Crossref
Xingxin Liang, Zhenglin Liu, Huanjie Wang, Xuhui Zhou & Xincong Zhou. (2016) Hydrodynamic lubrication of partial textured sliding journal bearing based on three-dimensional CFD. Industrial Lubrication and Tribology 68:1, pages 106-115.
Crossref
Daniel Gropper, Ling Wang & Terry J. Harvey. (2016) Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings. Tribology International 94, pages 509-529.
Crossref
Arslan Ahmed, H. H. Masjuki, M. Varman, M. A. Kalam, M. Habibullah & K. A. H. Al Mahmud. (2015) An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals. Meccanica 51:1, pages 9-23.
Crossref
Xu Feng, Jianzhong Zhou, Yufen Mei, Shu Huang, Jie Sheng & Weili Zhu. (2015) Improving tribological performance of gray cast iron by laser peening in dynamic strain aging temperature regime. Chinese Journal of Mechanical Engineering 28:5, pages 904-910.
Crossref
S. Prakash & G. Nagarajan. (2015) Theoretical Model for the Optimal Design of Surface Texturing on Piston Compression Ring. Applied Mechanics and Materials 787, pages 327-331.
Crossref
Yuan Fang, Yongsheng Zhang, Hengzhong Fan, Tianchang Hu, Junjie Song & Litian Hu. (2015) Surface composition-lubrication design of Al2O3/Mo laminated composites—Part I: Influence of laser surface texturing on the tribological behavior at 25 and 800 °C. Wear 334-335, pages 23-34.
Crossref
K. Abe, H. Fukaura, M. Aramaki & O. Furukimi. (2015) FEM Analysis of Friction for Pressing Dies Controlled by Shot Treatment. HTM Journal of Heat Treatment and Materials 70:1, pages 26-32.
Crossref
Michael T. Johnston, William P. King & Randy H. Ewoldt. (2015) Shear stress characteristics of microtextured surfaces in gap-controlled hydrodynamic lubrication. Tribology International 82, pages 123-132.
Crossref
Dangsheng Xiong, Yongkun Qin, Jianliang Li, Yi Wan & Rajneesh Tyagi. (2015) Tribological properties of PTFE/laser surface textured stainless steel under starved oil lubrication. Tribology International 82, pages 305-310.
Crossref
H. A. Abdel-Aal. 2015. Processing Techniques and Tribological Behavior of Composite Materials. Processing Techniques and Tribological Behavior of Composite Materials 268 315 .
Wang Wenzhong, Shen Dian, Zhang Shengguang & Zhao Ziqiang. (2015) Investigation of Patterned Textures in Ball-on-Disk Lubricated Point Contacts. Journal of Tribology 137:1.
Crossref
G.F. Sun, K. Wang, R. Zhou, A.X. Feng & W. Zhang. (2015) Effect of different heat-treatment temperatures on the laser cladded M3:2 high-speed steel. Materials & Design (1980-2015) 65, pages 606-616.
Crossref
Hiroyuki Yamada, Satoru Kaneko & Hiroo Taura. 2015. Proceedings of the 9th IFToMM International Conference on Rotor Dynamics. Proceedings of the 9th IFToMM International Conference on Rotor Dynamics 883 893 .
Matthias Bieda, Cindy Schmädicke, Teja Roch & Andrés Lasagni. (2015) Ultra-Low Friction on 100Cr6-Steel Surfaces After Direct Laser Interference Patterning. Advanced Engineering Materials 17:1, pages 102-108.
Crossref
Yuanyuan Jiang, Yuan Gao & Qi An. (2014) Dynamic analysis of the rotor supported by journal bearing with micro-spherical surface texturing. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 228:4, pages 355-365.
Crossref
H. Zhang, D. Y. Zhang, M. Hua, G. N. Dong & K. S. Chin. (2014) A Study on the Tribological Behavior of Surface Texturing on Babbitt Alloy under Mixed or Starved Lubrication. Tribology Letters 56:2, pages 305-315.
Crossref
Ling Wang. (2014) Use of structured surfaces for friction and wear control on bearing surfaces. Surface Topography: Metrology and Properties 2:4, pages 043001.
Crossref
Suwas Nikumb, Ravi Bathe & George K. Knopf. Laser microprocessing technologies for automotive, flexible electronics, and solar energy sectors. Laser microprocessing technologies for automotive, flexible electronics, and solar energy sectors.
G.F. Sun, R. Zhou, Y.K. Zhang, G.D. Yuan, K. Wang, X.D. Ren & D.P. Wen. (2014) Microstructure evolution and lubricant wear performance of laser alloyed layers on automobile engine chains. Optics & Laser Technology 62, pages 20-31.
Crossref
Ravi Bathe, V. Sai Krishna, S. K. Nikumb & G. Padmanabham. (2014) Laser surface texturing of gray cast iron for improving tribological behavior. Applied Physics A 117:1, pages 117-123.
Crossref
Xiangkai Meng, Shaoxian Bai & Xudong Peng. (2014) Lubrication film flow control by oriented dimples for liquid lubricated mechanical seals. Tribology International 77, pages 132-141.
Crossref
Stephen M Hsu, Yang Jing, Diann Hua & Huan Zhang. (2014) Friction reduction using discrete surface textures: principle and design. Journal of Physics D: Applied Physics 47:33, pages 335307.
Crossref
Lichun Hao, Yonggang Meng & Cheng Chen. (2014) Experimental investigation on effects of surface texturing on lubrication of initial line contacts. Lubrication Science 26:5, pages 363-373.
Crossref
Robert Jackson & Jiang Lei. (2014) Hydrodynamically Lubricated and Grooved Biomimetic Self-Adapting Surfaces. Journal of Functional Biomaterials 5:2, pages 78-98.
Crossref
Tao Wang, Weifeng Huang, Xiangfeng Liu, Yongjian Li & Yuming Wang. (2014) Experimental study of two-phase mechanical face Seals with laser surface texturing. Tribology International 72, pages 90-97.
Crossref
Jinghu Ji, Yonghong Fu & Qinsheng Bi. (2014) The influence of partially textured slider with orientation ellipse dimples on the behavior of hydrodynamic lubrication. Industrial Lubrication and Tribology 66:2, pages 161-167.
Crossref
Beomkeun Kim, Young Hun Chae & Heung Soap Choi. (2014) Effects of surface texturing on the frictional behavior of cast iron surfaces. Tribology International 70, pages 128-135.
Crossref
Masahiro FUJII, Yuta KUNITOMI & Koki ISHIDA. (2014) Effects of sliding surface profile on friction characteristics of viscoelastic material. Transactions of the JSME (in Japanese) 80:820, pages TRANS0339-TRANS0339.
Crossref
Ismail Syed & M. Sarangi. (2014) Hydrodynamic lubrication with deterministic micro textures considering fluid inertia effect. Tribology International 69, pages 30-38.
Crossref
Gustavo C. Buscaglia, Ionel Ciuperca, Eric Dalissier & Mohammed Jai. (2013) A new cavitation model in lubrication: the case of two-zone cavitation. Journal of Engineering Mathematics 83:1, pages 57-79.
Crossref
M. Fesanghary & M.M. Khonsari. (2013) On the optimum groove shapes for load-carrying capacity enhancement in parallel flat surface bearings: Theory and experiment. Tribology International 67, pages 254-262.
Crossref
Tiffany Davis Ling, Pinzhi Liu, Shangwu Xiong, Donald Grzina, Jian Cao, Q. Jane Wang, Z. Cedric Xia & Rajesh Talwar. (2013) Surface Texturing of Drill Bits for Adhesion Reduction and Tool Life Enhancement. Tribology Letters 52:1, pages 113-122.
Crossref
H A Abdel-Aal & M El Mansori. (2013) Tribological analysis of the ventral scale structure in a Python regius in relation to laser textured surfaces . Surface Topography: Metrology and Properties 1:1, pages 015001.
Crossref
Izhak Etsion. (2013) Modeling of surface texturing in hydrodynamic lubrication. Friction 1:3, pages 195-209.
Crossref
Auezhan Amanov & Shinya Sasaki. (2013) A study on the tribological characteristics of duplex-treated Ti–6Al–4V alloy under oil-lubricated sliding conditions. Tribology International 64, pages 155-163.
Crossref
Zhaoqiang Wang, Linyi Gu & Lin Li. (2013) Experimental studies on the overall efficiency performance of axial piston motor with a laser surface textured valve plate. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:7, pages 1049-1056.
Crossref
Chien-Yu Chen, Bo-Hsiung Wu, Chung-Jen Chung, Wang-Long Li, Chih-Wei Chien, Ping-Han Wu & Chung-Wei Cheng. (2013) Low-Friction Characteristics of Nanostructured Surfaces on Silicon Carbide for Water-Lubricated Seals. Tribology Letters 51:1, pages 127-133.
Crossref
Kazuyuki Yagi & Joichi Sugimura. (2013) Balancing Wedge Action: A Contribution of Textured Surface to Hydrodynamic Pressure Generation. Tribology Letters 50:3, pages 349-364.
Crossref
Fan Ming Meng & Tao Long. (2013) Study Film Temperature Including Cavitation Effect of Sliding Bearing by CFD Method. Advanced Materials Research 690-693, pages 2012-2015.
Crossref
M. Tauviqirrahman, R. Ismail, J. Jamari & D. J. Schipper. (2012) A study of surface texturing and boundary slip on improving the load support of lubricated parallel sliding contacts. Acta Mechanica 224:2, pages 365-381.
Crossref
Agata Guzek, Pawel Podsiadlo & Gwidon W. Stachowiak. (2013) Optimization of Textured Surface in 2D Parallel Bearings Governed by the Reynolds Equation Including Cavitation and Temperature. Tribology Online 8:1, pages 7-21.
Crossref
Youqiang Xing, Jianxin Deng, Ze Wu & Hongwei Cheng. (2013) Effect of regular surface textures generated by laser on tribological behavior of Si3N4/TiC ceramic. Applied Surface Science 265, pages 823-832.
Crossref
Gonzalo Brito Gadeschi, Katja Backhaus & Gunther Knoll. (2012) Numerical Analysis of Laser-Textured Piston-Rings in the Hydrodynamic Lubrication Regime. Journal of Tribology 134:4.
Crossref
Jinyu Zhang & Yonggang Meng. (2012) A study of surface texturing of carbon steel by photochemical machining. Journal of Materials Processing Technology 212:10, pages 2133-2140.
Crossref
Noël Brunetière & Bernard Tournerie. (2012) Numerical analysis of a surface-textured mechanical seal operating in mixed lubrication regime. Tribology International 49, pages 80-89.
Crossref
Jinyu Zhang & Yonggang Meng. (2012) Direct Observation of Cavitation Phenomenon and Hydrodynamic Lubrication Analysis of Textured Surfaces. Tribology Letters 46:2, pages 147-158.
Crossref
Chien-Yu Chen, Chung-Jen Chung, Bo-Hsiung Wu, Wang-Long Li, Chih-Wei Chien, Ping-Han Wu & Chung-Wei Cheng. (2012) Microstructure and lubricating property of ultra-fast laser pulse textured silicon carbide seals. Applied Physics A 107:2, pages 345-350.
Crossref
Shaoxian Bai, Xudong Peng, Yefeng Li & Songen Sheng. (2012) Gas Lubrication Analysis Method of Step-Dimpled Face Mechanical Seals. Journal of Tribology 134:1.
Crossref
Yonghong FuJinghu JiQinsheng Bi. (2012) Hydrodynamic Lubrication of Conformal Contacting Surfaces With Parabolic Grooves. Journal of Tribology 134:1.
Crossref
Victor Gabriel Marian, Dumitru Gabriel, Gunter Knoll & Salvatore Filippone. (2011) Theoretical and Experimental Analysis of a Laser Textured Thrust Bearing. Tribology Letters 44:3, pages 335-343.
Crossref
Shiyuan Pei, Shilei Ma, Hua Xu, Fengcai Wang & Yangli Zhang. (2011) A multiscale method of modeling surface texture in hydrodynamic regime. Tribology International 44:12, pages 1810-1818.
Crossref
Andriy Kovalchenko, Oyelayo Ajayi, Ali Erdemir & George Fenske. (2011) Friction and wear behavior of laser textured surface under lubricated initial point contact. Wear 271:9-10, pages 1719-1725.
Crossref
Z. M. Zhang, Q. An, W. J. Zhang, Q. Yang, Y. J. Tang & X. B. Chen. (2010) Modeling of directional friction on a fully lubricated surface with regular anisotropic asperities. Meccanica 46:3, pages 535-545.
Crossref
Y.-Z. Hu & T.-B. Ma. 2011. Comprehensive Nanoscience and Technology. Comprehensive Nanoscience and Technology 383 418 .
H. A. Abdel-Aal & M. El Mansori. 2011. Biomimetics -- Materials, Structures and Processes. Biomimetics -- Materials, Structures and Processes 51 79 .
Jung Won Byun, Hong Shik Shin, Min Ho Kwon, Bo Hyun Kim & Chong Nam Chu. (2010) Surface texturing by micro ECM for friction reduction. International Journal of Precision Engineering and Manufacturing 11:5, pages 747-753.
Crossref
L Mourier, D Mazuyer, F-P Ninove & A A Lubrecht. (2010) Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 697-711.
Crossref
M B Dobrica, M Fillon, M D Pascovici & T Cicone. (2010) Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 737-750.
Crossref

Displaying 200 of 236 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.