Walaa Abd-Elaziem, Mahmoud Khedr, Ammar.H. Elsheikh, Jingku Liu, Yuxin Zeng, Tamer A. Sebae, Marwa A. Abd El-Baky, Moustafa A. Darwish, Walid M. Daoush & Xiaochun Li. (2024) Influence of nanoparticles addition on the fatigue failure behavior of metal matrix composites: Comprehensive review. Engineering Failure Analysis 155, pages 107751.
Crossref
R. Anand Sekhar, R. Rakesh Pillai, M. Mubarak Ali & C.N. Shyam Kumar. (2023) Enhanced mechanical and wear properties of aluminium-based composites reinforced with a unique blend of granite particles and boron carbide for sustainable material recycling. Journal of Alloys and Compounds 963, pages 171165.
Crossref
Veerappan Balasubramani, R Pandiarajan, Balasubramanian Stalin & Vijayananth Kavimani. (2023)
Mechanical and metallurgical characterization of B
4
C and SiC reinforced stir casted AA6061 hybrid MMC
. Physica Scripta 98:10, pages 105922.
Crossref
Arabinda Meher & Manas Mohan Mahapatra. (2022) Investigation on the Effect of Machining Parameters on Machinability of RZ5/TiB2 In-Situ Magnesium Matrix Composite. Journal of Materials Engineering and Performance 32:17, pages 7706-7720.
Crossref
Marco Speth, Kim Rouven Riedmüller & Mathias Liewald. (2023) Influence of Reinforcement Particle Parameters on the Homogeneity of Particle Distribution in Semi-Solid Formed Aluminium Matrix Composites. Solid State Phenomena 347, pages 39-45.
Crossref
Fatih Aydın. (2023) A review of recent developments in the corrosion performance of aluminium matrix composites. Journal of Alloys and Compounds 949, pages 169508.
Crossref
Merugu Rakesh, Neeraj Srivastava, Shishira Bhagavath & Shyamprasad Karagadde. (2023) Role of In Situ Formed (Al3Zr + Al3Ti) Particles on Nucleation of Primary Phase in Al-5 wt.% Cu Alloy. Journal of Materials Engineering and Performance.
Crossref
H. BALLIKAYA. (2023) EXPERIMENTAL AND NUMERICAL EXAMINATION OF THE WEAR BEHAVIORS OF AA 7075 ALLOY COATED WITH Al–SiC BY USING HOT PRESS SINTERING METHOD. Surface Review and Letters 30:06.
Crossref
A. Hemalatha, V. Diwakar Reddy & S. Hemachandra. (2023) Optimization of process parameters for wire electrical discharge machining of aluminium based metal matrix composite by Taguchi’s approach. Materials Today: Proceedings.
Crossref
Dheeraj Kumar Saini & Pradeep Kumar Jha. (2023) Fabrication of aluminum metal matrix composite through continuous casting route: A review and future directions. Journal of Manufacturing Processes 96, pages 138-160.
Crossref
Ranjeet Kumar Arya, Rajan Kumar & Amit Telang. (2023) Influence of Microstructure on Tribological Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles. Silicon 15:9, pages 3987-4001.
Crossref
Shashi Prakash Dwivedi, Vijay Kumar Dwivedi & Rajat Yadav. (2023) Tribological and Corrosion Behavior of Eggshell and Agro-waste RHA Reinforced Al Alloy Composite Material with and without Ball-Milling. Journal of The Institution of Engineers (India): Series D.
Crossref
Ranjeet Kumar Arya, Rajan Kumar, Amit Telang & Anil Singh Yadav. (2023) Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles. Silicon.
Crossref
Vaddi Thulasikanth & R. Padmanabhan. (2022) Processing of aluminium/fly ash composite foams for sustainable green products. Journal of Porous Materials 30:2, pages 459-469.
Crossref
Vivudh Gupta, Balbir Singh & RK Mishra. (2023) Electrical discharge machining assessment of AA7075/Rice Husk Ash composite using response surface methodology. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892311609.
Crossref
Prashant Suresh Tile & Benedict Thomas. (2023) Effect of Load, Sliding Velocity, and Reinforcements on Wear Characteristics of Al7075-Based Composite and Nanocomposites Fabricated by Ultrasonic-Assisted Stir-Casting Technique. International Journal of Metalcasting.
Crossref
Sourabh Kumar Soni, Manimaran D, Shweta B. Thomas & Benedict Thomas. (2023) Microstructure and mechanical characterization of Al6061 based composite and nanocomposites prepared via conventional and ultrasonic-assisted melt-stirring techniques. Materials Today Communications 34, pages 105222.
Crossref
V.K. Parikh, Vivek Patel, D.P. Pandya & Joel Andersson. (2023) Current status on manufacturing routes to produce metal matrix composites: State-of-the-art. Heliyon 9:2, pages e13558.
Crossref
John Samson Khalkho, D. Benny Karunakar & Suresh Vidyasagar. (2023) Effect of Aging and Rolling on Microstructure and Mechanical Properties of AA7075/TaC Composites. Journal of Materials Engineering and Performance.
Crossref
Arka Ghosh, Sourav Ganguly & Nasimul Alam Syed. (2023) Development of Al-Based Nanocomposites Using CNT-GnP-hBN Ternary Hybrid Reinforcement. Materials Research 26.
Crossref
Debashis Mishra & Alok Kumar Nanda. (2023) Experimental investigation on mechanical properties of stir casted aluminum SiC metal matrix composites. Materials Today: Proceedings 74, pages 1023-1027.
Crossref
N. Ramadoss, K. Pazhanivel, A. Ganeshkumar & M. Arivanandhan. (2022) Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites. International Journal of Metalcasting 17:1, pages 499-514.
Crossref
P. Shanmughasundaram, S Thirumurugaveerakumar & R Kalaiselvi. 2023. Advances in Manufacturing, Automation, Design and Energy Technologies. Advances in Manufacturing, Automation, Design and Energy Technologies
261
269
.
Kaan Emre Engin, Ali Ihsan Kaya & Serif Citil. 2023. 2nd International Conference on Industrial Applications of Adhesives 2022. 2nd International Conference on Industrial Applications of Adhesives 2022
115
133
.
Jiawei Sun, Dehua Ding, Wencai Liu, Guohua Wu, Hongjie Liu, Guangling Wei & Hezhou Liu. (2022) Strength and elastic modulus enhancement in Mg-Li-Al matrix composites reinforced by ex situ TiB2 particles via stir casting. Journal of Magnesium and Alloys.
Crossref
S. V. Sujith, Hansoo Kim, Rahul S. Mulik, Hyeonwoo Park & Joonho Lee. (2021) Synergistic Effect of In-Situ Al-7075/Al3Ti Metal Matrix Composites Prepared via Stir-Assisted Ultrasonic Melt Processing Under Dynamic Nucleation. Metals and Materials International 28:9, pages 2288-2303.
Crossref
Itopa Godwin Akande, Ojo Sunday Isaac Fayomi, Oluleke Olugbemiga Oluwole & Olusegun Olufemi Ajide. (2022) Development of Zn–ZrB2 nanocomposite coatings for wear, corrosion resistance and microstructure enhancement of carbon steel in saline environment. Chemical Papers 76:9, pages 5839-5852.
Crossref
Tarun Kumar Kotteda, Manoj Kumar, Pramod Kumar & Rama Bhadri Raju Chekuri. (2022) Metal matrix nanocomposites: future scope in the fabrication and machining techniques. The International Journal of Advanced Manufacturing Technology.
Crossref
Kanchiraya Shivalingaiah, Vinayaka Nagarajaiah, Chithirai Pon Selvan, Smitha Thothera Kariappa, Nandini Gowdru Chandrashekarappa, Avinash Lakshmikanthan, Manjunath Patel Gowdru Chandrashekarappa & Emanoil Linul. (2022) Stir Casting Process Analysis and Optimization for Better Properties in Al-MWCNT-GR-Based Hybrid Composites. Metals 12:8, pages 1297.
Crossref
Jigar Suthar & Kaushik Patel. (2022) Corrosion Behaviour of Mg, Graphite-, B4C and Ti-Reinforced Hybrid Aluminium Composites. Journal of The Institution of Engineers (India): Series C 103:4, pages 689-704.
Crossref
Anshu Anand & Sanjiv Kumar Tiwari. (2022) Recent advancements in the production of hybrid metal matrix composites (HMMC): A Review. IOP Conference Series: Materials Science and Engineering 1248:1, pages 012087.
Crossref
Vivudh Gupta & Pawandeep Singh. (2022) Turning of Aluminium Composites: Characteristics and Future Prospects. IOP Conference Series: Materials Science and Engineering 1248:1, pages 012077.
Crossref
V. B. Deev, E. S. Prusov & E. H. Ri. (2022) Physical Methods of Processing the Melts of Metal Matrix Composites: Current State and Prospects. Russian Journal of Non-Ferrous Metals 63:3, pages 292-304.
Crossref
Daohui Xiang, Bo Li, Peicheng Peng, Zhanli Shi, Yanqin Li, Guofu Gao & Bo Zhao. (2021) Study on formation mechanism of edge defects of high-volume fraction SiCp/Al composites by longitudinal-torsional ultrasonic vibration-assisted milling. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:11, pages 6219-6231.
Crossref
Pardeep Saini & Pradeep K Singh. (2022) Investigation on characterization and machinability of Al-4032/SiC metal matrix composite. Surface Topography: Metrology and Properties 10:2, pages 025007.
Crossref
T. Sivakumar, Chikkappa Udagani, M. Sivaranjani, M. Sudhakar, Reem Mohammed Alharbi, Neveen Abdel-Raouf, Ibraheem Borie M. Ibraheem, Essam Nageh Sholkamy, Mahadeo A. Mahadik & Simon Yishak. (2022) Impact of BN and WC Particulate Reinforcements on Mechanical Properties and Damage Development of Al-2048 Metal Matrix Composites. Advances in Materials Science and Engineering 2022, pages 1-9.
Crossref
S. V. Sujith & Rahul S. Mulik. (2022) Surface Integrity and Flank Wear Response Under Pure Coconut Oil-Al2O3 Nano Minimum Quantity Lubrication Turning of Al-7079/7 wt%-TiC In Situ Metal Matrix Composites. Journal of Tribology 144:5.
Crossref
Belal G. Nassef, Mohamed A. Daha & Mohamed G. Nassef. (2022) Hybrid Reinforced Aluminium Composites Using Reduced Graphene Oxide Fabricated via Powder Metallurgy Technique. Materials Science Forum 1059, pages 97-101.
Crossref
V. B. Deev, E. S. Prusov & E. Kh. Ri. (2022) Physical methods of processing melts of metal matrix composites: Сurrent state and prospects. Izvestiya Vuzov. Tsvetnaya Metallurgiya (Universities' Proceedings Non-Ferrous Metallurgy) 28:2, pages 43-59.
Crossref
Pardeep Saini, Deepak Kumar, Anuj K. Maurya & Pradeep K. Singh. (2022) A study on bi-objective optimization for end milling of Aluminium based composite. IOP Conference Series: Materials Science and Engineering 1225:1, pages 012024.
Crossref
T. Ramachandran, S. Murugapoopathi, R. Dharmalingam & S. Surendarnath. (2022) Studies on engine vibration isolation behaviours of Al6061-SiC metal matrix engine mounts for diesel engines. Materials Today: Proceedings 66, pages 1485-1491.
Crossref
Narender Kumar & Sachin Maheshwari. (2022) Expounding the influence of micro/nano particles on mechanical and tribological properties of AA 7050 matrix composite: A review. Materials Today: Proceedings 62, pages 3361-3367.
Crossref
Navya Kota, Munagala Sai Charan, Tapas Laha & Siddhartha Roy. (2022) Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties. Ceramics International 48:2, pages 1451-1483.
Crossref
M. Kathiresan, R. Theerkka Tharisanan & P. Pandiarajan. 2022. Computational Intelligence in Manufacturing. Computational Intelligence in Manufacturing
131
159
.
Amit Aherwar, Catalin I. Pruncu & Mozammel Mia. (2021) Optimal Design Based on Fabricated SiC/B4C/Porcelain Filled Aluminium Alloy Matrix Composite Using Hybrid AHP/CRITIC-COPRAS Approach. Silicon 14:2, pages 603-615.
Crossref
M. Saravana Kumar, C. I. Pruncu, P. Harikrishnan, S. Rashia Begum & M. Vasumathi. (2021) Experimental Investigation of In-homogeneity in Particle Distribution During the Processing of Metal Matrix Composites. Silicon 14:2, pages 629-641.
Crossref
Vivudh Gupta, Balbir Singh & RK Mishra. (2021) Microstructural and mechanical characterization of novel AA7075 composites reinforced with rice husk ash and carbonized eggshells. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235:12, pages 2666-2680.
Crossref
Pardeep Saini & Pradeep K Singh. (2021) Optimization of end milling parameters for rough and finish machining of Al-4032/3%SiC metal matrix composite. Engineering Research Express 3:4, pages 045009.
Crossref
Pawandeep Singh, R K Mishra & Balbir Singh. (2021) Tribological behaviour of lamb bone ash and boron carbide reinforced ZA-27 hybrid metal matrix composites under dry sliding conditions. Surface Topography: Metrology and Properties 9:4, pages 045034.
Crossref
A. Chinnamahammad Bhasha & K. Balamurugan. (2021) Studies on mechanical properties of Al6061/RHC/TiC hybrid composite. International Journal of Lightweight Materials and Manufacture 4:4, pages 405-415.
Crossref
Meng-jie Zhai, Feng-lin Zhang, Xiao-sen Chen, Yu-bin Lin, Mei-xing Zhu, Hong-qun Tang & Yu-mei Zhou. (2021) Preparation and characterization of nanodiamond reinforced aluminum matrix composites by hot-press sintering. Diamond and Related Materials 120, pages 108664.
Crossref
Venkataramanan Srinivasan, Selvaraj Kunjiappan & Ponnusamy Palanisamy. (2021) A brief review of carbon nanotube reinforced metal matrix composites for aerospace and defense applications. International Nano Letters 11:4, pages 321-345.
Crossref
P. Ashwath, M. Anthony Xavior & Andre DL Batako. (2021) Processing, Characterization, and Properties of α-Al2O3-AA2900 Composites for Aerospace Brake Pad Applications. JOM 73:12, pages 4365-4375.
Crossref
Srinivas Prabhu, Padmakumar Bajakke & Vinayak Malik. (2021) A review on in-situ aluminum metal matrix composites manufactured via friction stir processing: meeting on-ground industrial applications. World Journal of Engineering 18:6, pages 956-970.
Crossref
Xianke Lu, Yubao Zhang, Shengjie Xiao, Yan Lu, Dezhong Meng, Wenbo Qin & Jiansheng Li. (2021) Tribological behavior and mechanism of high proportion of ceramic particles reinforced Al composite. Journal of Materials Research and Technology 15, pages 4931-4939.
Crossref
Deepak Doreswamy, Anupkumar M. Bongale, Marcin Piekarski, Arunkumar Bongale, Satish Kumar, Danil Yurievich Pimenov, Khaled Giasin & Krzysztof Nadolny. (2021) Optimization and Modeling of Material Removal Rate in Wire-EDM of Silicon Particle Reinforced Al6061 Composite. Materials 14:21, pages 6420.
Crossref
A. Sharma, V. Rastogi & A.K. Agrawal. (2020) Estimation and Experimental Validation of Mean-Field Homogenised Effective Properties of Composite. Experimental Techniques 45:4, pages 445-456.
Crossref
Ke Zhao, Xinxin Zhu, Jinling Liu, Yanju Wang, Bin Chen, Qiuming Wei & Linan An. (2021) Superb high-temperature strength of aluminum-based nanocomposite with supra-nano stacking faults/twins. Composites Communications 25, pages 100753.
Crossref
Raju Kandasamy & Balakrishnan Marimuthu. (2021) Manufacturing of Al-Li-Si3N4 metal matrix composite for weight reduction. Materials Testing 63:2, pages 169-175.
Crossref
R. Ranga Raj, J. Yoganandh, M. S. Senthil Saravanan & S. Sathiesh Kumar. (2020) Effect of graphene addition on the mechanical characteristics of AA7075 aluminium nanocomposites. Carbon Letters 31:1, pages 125-136.
Crossref
Divya Zindani. 2021. Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement. Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement
443
456
.
V N Vivek Bhandarkar, Bhaskar Pal & S.P. Shanmuganathan. (2021) Assessment and Modelling of Cutting Forces in Turning of Aluminium Metal Matrix Composite Using Response Surface Methodology. IOP Conference Series: Materials Science and Engineering 1013:1, pages 012022.
Crossref
P. Ashwath & M. Anthony Xavior. (2021) Surface modification on aluminum metal matrix composite for high strength application -Current state of art. Materials Today: Proceedings 46, pages 7130-7134.
Crossref
J. Jones Praveen, M. Vinosh, A. Bovas Herbert Bejaxhin & G. Paulraj. (2021) Embedded effect of ZrB2-Si3N4 on tribological behaviour of Al 8011 metal matrix composite. Materials Today: Proceedings.
Crossref
S. Narayanan, G.G. sozhamannan, K. Hemalatha & V.S.K. Venkatachalapathy. (2021) Study on pitting corrosion behaviour of graphene oxide reinforced metal matrix composites. Materials Today: Proceedings 39, pages 160-164.
Crossref
S. Shankar, R. Nithyaprakash & G. Abbas. 2021. Tribological Applications of Composite Materials. Tribological Applications of Composite Materials
215
241
.
Pankaj K Gupta & MK Gupta. (2020)
Mechanical and microstructural analysis of Al-Al
2
O
3
/B4C hybrid composites
. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234:12, pages 1503-1514.
Crossref
Hui-min Xia, Lan Zhang, Yong-chao Zhu, Na Li, Yu-qi Sun, Ji-dong Zhang & Hui-zhong Ma. (2020) Mechanical properties of graphene nanoplatelets reinforced 7075 aluminum alloy composite fabricated by spark plasma sintering. International Journal of Minerals, Metallurgy and Materials 27:9, pages 1295-1300.
Crossref
A Raja Annamalai, Johny James, P Kuppan, S Hemakumar & Chun-Ping Jen. (2020)
Studies on mechanical property of squeeze cast and heat treated AA6061-ZrO
2
composite
. Materials Research Express 7:8, pages 086506.
Crossref
M. Bhuvanesh Kumar, R. Parameshwaran, K. Deepandurai & S. M. Senthil. (2020) Influence of Milling Parameters on Surface Roughness of Al–SiC–B4C Composites. Transactions of the Indian Institute of Metals 73:5, pages 1171-1183.
Crossref
G. Ramanan, M.Madhu Kiran Reddy & V. Manishankar. (2020) Optimization of Wire Electrical Discharge Machining Parameters of Activated Carbon Reinforced Aluminium Composite. Materials Science Forum 979, pages 3-9.
Crossref
A. SHANMUGAM, K. KRISHNAMURTHY & T. MOHANRAJ. (2019) EXPERIMENTAL STUDY OF SURFACE ROUGHNESS AND TAPER ANGLE IN ABRASIVE WATER JET MACHINING OF 7075 ALUMINUM COMPOSITE USING RESPONSE SURFACE METHODOLOGY. Surface Review and Letters 27:03, pages 1950112.
Crossref
A. Ghandehariun & H. A. Kishawy. (2020) A novel approach towards prediction of subsurface damage during machining metal matrix composites. The International Journal of Advanced Manufacturing Technology 106:7-8, pages 3515-3521.
Crossref
Arun Kumar Sharma, Rakesh Bhandari, Amit Aherwar & Camelia Pinca-Bretotean. (2020) A study of fabrication methods of aluminum based composites focused on stir casting process. Materials Today: Proceedings 27, pages 1608-1612.
Crossref
Renjin J Bright, G Selvakumar, M Sumathi & N Lenin. (2019) Development, mechanical characterization and analysis of dry sliding wear behavior of AA6082–Metakaolin metal matrix composites. Materials Research Express 6:12, pages 126516.
Crossref
A. Chinnamahammad Bhasha & K. Balamurugan. (2019) Fabrication and property evaluation of Al 6061 + x% (RHA + TiC) hybrid metal matrix composite. SN Applied Sciences 1:9.
Crossref
M Reihanian, M Dashtbozorg & SM Lari Baghal. (2019) Fabrication of glass/carbon fiber-reinforced Al-based composites through deformation bonding. Journal of Composite Materials 53:18, pages 2531-2543.
Crossref
Akhil Khajuria, Modassir Akhtar, Manish Kumar Pandey, Mayur Pratap Singh, Ankush Raina, Raman Bedi & Balbir Singh. (2019)
Influence of ceramic Al
2
O
3
particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs
. World Journal of Engineering 16:4, pages 526-538.
Crossref
Mohd Bilal Naim Shaikh, Sajjad Arif, Tariq Aziz, Adnan Waseem, Mohd Ahmed Naim Shaikh & Mohammed Ali. (2019) Microstructural, mechanical and tribological behaviour of powder metallurgy processed SiC and RHA reinforced Al-based composites. Surfaces and Interfaces 15, pages 166-179.
Crossref
Arunachalam Ramanathan, Pradeep Kumar Krishnan & Rajaraman Muraliraja. (2019) A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities. Journal of Manufacturing Processes 42, pages 213-245.
Crossref
Meng Hu, Weiwei Ming, Qinglong An & Ming Chen. (2019) Experimental study on milling performance of 2D C/SiC composites using polycrystalline diamond tools. Ceramics International 45:8, pages 10581-10588.
Crossref
Divya Zindani. 2019. Design, Development, and Optimization of Bio-Mechatronic Engineering Products. Design, Development, and Optimization of Bio-Mechatronic Engineering Products
57
76
.
Vivudh Gupta, Pawandeep Singh, Balbir Singh & R. K. Mishra. Wear behaviour of AA7075 based composites: A state of the art survey. Wear behaviour of AA7075 based composites: A state of the art survey.
Manojit Das, Debadutta Mishra & Trupti Ranjan Mahapatra. (2019) Machinability of Metal Matrix Composites: A Review. Materials Today: Proceedings 18, pages 5373-5381.
Crossref
Samuel Ranti Oke, Oluwasegun Eso Falodun, Mphahlele R. Mahlatse, Oladeji Oluremi Ige & Peter Apata Olubambi. (2019) Investigation on densification and microstructure of Al-TiO2 composite produced by Spark plasma sintering. Materials Today: Proceedings 18, pages 3182-3188.
Crossref
Evgeny Prusov, Vladislav Deev & Evgeny Rakhuba. (2019) Aluminum Matrix In-Situ Composites Reinforced with Mg2Si and Al3Ti. Materials Today: Proceedings 11, pages 386-391.
Crossref
Manu Srivastava, Sandeep Rathee, Sachin Maheshwari & Arshad Noor Siddiquee. (2018) Investigation on underwater FSP of Al-Mg-Si alloy surface composites. Materials Research Express 6:2, pages 026520.
Crossref
Tennur Gülşen Ünal & Ege Anıl Diler. (2018)
Properties of AlSi
9
Cu
3
metal matrix micro and nano composites produced via stir casting
. Open Chemistry 16:1, pages 726-731.
Crossref
Godwin Akande, O. S. I. Fayomi & O.O. Oluwole. (2021) Development of Zn-ZrB <sub>2</sub> Nanocomposite Coating for Wear, Corrosion Resistance and Microstructure Enhancement of Carbon Steel in Marine Environment. SSRN Electronic Journal.
Crossref