Citations (38)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Rakesh Kumar, Vinod Yadav, Lavish Rawal & Upendra Kulshrestha. (2023) Analysis of over cut in electrical discharge machining of nickel-based alloy using Taguchi approach. Materials and Manufacturing Processes 38:1, pages 126-134.
Read now
Read now
M. Dhananchezian, K. Rajkumar & Prithivirajan S. (2023) Cutting velocity influenced machinability of Monel 400 by coated tool. Materials and Manufacturing Processes 38:1, pages 116-125.
Read now
Read now
Sambaran Mukherjee, Devesh Rai & Abimannan Giridharan. (2022) EDM of titanium foam: electrode wear rate, oversize, and MRR. Materials and Manufacturing Processes 37:7, pages 825-837.
Read now
Read now
Bin Xu, Tao Feng, Xiaoyu Wu, Feng Luo, Jianguo Lei, Jun Yang & Shiyun Wu. (2022) Micro-EDM of micro-stepped hole based on the wear of micro-bit. Materials and Manufacturing Processes 37:3, pages 349-358.
Read now
Read now
Guangcai Meng, Yanqiu Wang, Xiao Li, Huan Zhang, Xinyu Zhou, Zhongteng Bai, lizhuo Wu & Jinfeng Bai. (2022) Treatment of landfill leachate evaporation concentrate by a modified electro-Fenton method. Environmental Technology 43:4, pages 500-513.
Read now
Read now
Hreetabh Kishore, Chandrakant K. Nirala, Anupam Agrawal & Basil Kuriachen. (2021) Assessment of process parameters and performance enhancement through a novel suction flushing technology in RµEDM. Materials and Manufacturing Processes 36:13, pages 1476-1488.
Read now
Read now
Deepak Sharma & Somashekhar S. Hiremath. (2021) Review on tools and tool wear in EDM. Machining Science and Technology 25:5, pages 802-873.
Read now
Read now
Khyati Tamta & D. B. Karunakar. (2021) Development of hybrid pattern material for investment casting process: an experimental investigation on improvement in pattern characteristics. Materials and Manufacturing Processes 36:6, pages 744-751.
Read now
Read now
Ankita Sarmah, Siddhartha Kar & Promod Kumar Patowari. (2020) Surface modification of aluminum with green compact powder metallurgy Inconel-aluminum tool in EDM. Materials and Manufacturing Processes 35:10, pages 1104-1112.
Read now
Read now
Srinivas Soumitri Miriyala & Kishalay Mitra. (2020) Multi-objective optimization of iron ore induration process using optimal neural networks. Materials and Manufacturing Processes 35:5, pages 537-544.
Read now
Read now
Deepti Ranjan Sahu & Amitava Mandal. (2020) Critical analysis of surface integrity parameters and dimensional accuracy in powder-mixed EDM. Materials and Manufacturing Processes 35:4, pages 430-441.
Read now
Read now
D. Rajamani, K. Ananthakumar, E. Balasubramanian & J. Paulo Davim. (2018) Experimental investigation and optimization of PAC parameters on Monel 400™ superalloy. Materials and Manufacturing Processes 33:16, pages 1864-1873.
Read now
Read now
Articles from other publishers (26)
Ahmet Tolunay Işık, Ramazan Çakıroğlu & Mustafa Günay. (2023) Multiresponse optimization of performance indicators through Taguchi-grey relational analysis in EDM of cemented carbide. CIRP Journal of Manufacturing Science and Technology 41, pages 490-500.
Crossref
Crossref
Anshuman Kumar Sahu, Siba Sankar Mahapatra, Rahul Ravi & Srinivasa Rao Bakshi. (2022) Machinability Analysis of Composite Electrode Produced by Spark Plasma Sintering Process during Electro-Discharge Machining of Titanium Alloy. Journal of Materials Engineering and Performance 32:3, pages 1310-1332.
Crossref
Crossref
Rajusing Rathod, Dinesh Kamble & Nitin Ambhore. (2022) Performance evaluation of electric discharge machining of titanium alloy-a review. Journal of Engineering and Applied Science 69:1.
Crossref
Crossref
Sanjay Chintakindi, Ali Alsamhan, Mustufa Haider Abidi & Maduri Praveen Kumar. (2022) Annealing of Monel 400 Alloy Using Principal Component Analysis, Hyper-parameter Optimization, Machine Learning Techniques, and Multi-objective Particle Swarm Optimization. International Journal of Computational Intelligence Systems 15:1.
Crossref
Crossref
Karthik Pandiyan Ganesan, Jafrey Daniel James Dhilip, Vinothkumar Sivalingam, Arjun Duraipalam, Gowtham Seenivasan, Gokul Kannan Perumal, Bhuvaneshwar Karthikeyan, Ram Kumar Rajagopal & Mohanraj Chandran. (2022) Machinability analysis and optimisation of EDM in AA6082/3 wt% BN/1 wt% MoS2 hybrid composites using entropy method weights integrated with complex proportional assessment (COPRAS) method. The International Journal of Advanced Manufacturing Technology 123:11-12, pages 4051-4064.
Crossref
Crossref
Mahir Akgün. (2022) Performance analysis of electrode materials in electro discharge machining of monel K-500. Surface Topography: Metrology and Properties 10:3, pages 035026.
Crossref
Crossref
Anshuman Kumar Sahu, Siba Sankar Mahapatra, Neeraj Kumar Bhoi, Harpreet Singh, Marco Leite & Saurav Goel. (2022) Experimental Investigation on Microwave Sintered Composite Tool for Electro-Discharge Machining of Titanium Alloy. Journal of Materials Engineering and Performance 31:6, pages 5026-5041.
Crossref
Crossref
C. Murugan, R. M. Satheesh Kumar & S. V. Alagarsamy. (2020) Investigations on Electric Discharge Machining Behaviour of Si3N4 -TiN Ceramic Composite. Silicon 14:2, pages 547-555.
Crossref
Crossref
Pujari Srinivasa Rao, Siva Prasad Dora & Nadimpalli Sarada Purnima. (2021) Influence of WC/Co powder metallurgy electrodes made by micron and nano particles on EDM performance. Metal Powder Report 76:6, pages 52-58.
Crossref
Crossref
Arminder Singh Walia, Vineet Srivastava, Prashant S Rana, Nalin Somani, Nitin Kumar Gupta, Gurminder Singh, Danil Yurievich Pimenov, Tadeusz Mikolajczyk & Navneet Khanna. (2021) Prediction of Tool Shape in Electrical Discharge Machining of EN31 Steel Using Machine Learning Techniques. Metals 11:11, pages 1668.
Crossref
Crossref
Y. Aboobucker Parvez & S. Syath Abuthakeer. (2021)
Machining Characteristics of Al
2
O
3
Powder Mixed Electric Discharge Machining of AA7050/SiC
p
/Al
2
O
3p
Hybrid Composites
. ECS Journal of Solid State Science and Technology 10:7, pages 073007.
Crossref
Crossref
Anshuman Kumar Sahu & Siba Sankar Mahapatra. (2020)
Performance analysis of Cu-W-B
4
C composite tool during electrical discharge machining of titanium alloy
. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:11, pages 1992-2007.
Crossref
Crossref
Anshuman Kumar Sahu, Joji Thomas & Siba Sankar Mahapatra. (2020) An intelligent approach to optimize the electrical discharge machining of titanium alloy by simple optimization algorithm. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235:2, pages 371-383.
Crossref
Crossref
A. Perumal, A. Azhagurajan, R. Prithivirajan & S. Suresh Kumar. (2020) Experimental Investigation and Optimization of Process Parameters in Ti – (6242) Alpha–Beta Alloy Using Electrical Discharge Machining. Journal of Inorganic and Organometallic Polymers and Materials 31:4, pages 1787-1800.
Crossref
Crossref
P Jayahariharapranav, D Dinesh, P MathanKumar, G Rajamurugan & N Jayakumar. (2021)
Effect of Titanium Di-Boride/Copper (TiB
2
-Cu) Electrode on the Machinability of OHNS Steel by EDM Process
. IOP Conference Series: Materials Science and Engineering 1059:1, pages 012046.
Crossref
Crossref
Prosun Mandal & Subhas Chandra Mondal. (2021) Multi-objective optimization of Cu-MWCNT composite electrode in electro discharge machining using MOPSO-TOPSIS. Measurement 169, pages 108347.
Crossref
Crossref
Gurpreet Singh Matharou & Basanta Kumar Bhuyan. (2021) Modelling and combined effect analysis of electric discharge Machining process using response surface methodology. Materials Today: Proceedings 46, pages 6638-6643.
Crossref
Crossref
Dhananchezian M. (2021) Experimental investigation on dry turned Monel 400 alloy surface parameters with uncoated and coated tool. Materials Today: Proceedings 46, pages 8303-8306.
Crossref
Crossref
K. Sivakumar, P. Mathan Kumar, A. Amarkarthik, S. Jegadheeswaran & R. Shanmugaprakash. (2021) Empirical modeling of material removal rate and surface roughness of OHNS steel using Cu-TiB2Tool in EDM. Materials Today: Proceedings 45, pages 2725-2729.
Crossref
Crossref
P. Satishkumar, C. Saravana Murthi & R. Meenakshi. (2021) Optimization of machining parameters in wire EDM of OFHC copper using Taguchi analysis. Materials Today: Proceedings 37, pages 922-928.
Crossref
Crossref
Mohammad Pervez Mughal, Muhammad Umar Farooq, Jabir Mumtaz, Mozammel Mia, Madiha Shareef, Mahnoor Javed, Muhammad Jamil & Catalin I. Pruncu. (2021) Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM. Journal of the Mechanical Behavior of Biomedical Materials 113, pages 104145.
Crossref
Crossref
Yanqiu Wang, Guangcai Meng, Mingjun Shan, Dongyang Wang, Zhongteng Bai, Xinyu Zhou, Yanli Lv & Jinfeng Bai. (2020) Treatment of high-ammonia-nitrogen landfill leachate nanofiltration concentrate using an Fe-loaded Ni-foam-based electro-Fenton cathode. Journal of Environmental Chemical Engineering 8:5, pages 104243.
Crossref
Crossref
Kumaravel Subramaniam PhD, Alagumurthi Natarajan PhD, Nadanakumar Vinayagam, S Jenoris Muthiya & Ramdoss Rajendiran PhD.
Optimization of Wire Cut EDM Process Parameters of Al/SiO
2
Composites Using Taguchi Method
.
Optimization of Wire Cut EDM Process Parameters of Al/SiO
2
Composites Using Taguchi Method
.
Ramazan Çakıroğlu & Mustafa Günay. (2020) Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel. Journal of Materials Research and Technology 9:4, pages 7305-7317.
Crossref
Crossref
Arminder Singh Walia, Vineet Srivastava, Vivek Jain & Suneev Anil Bansal. 2020. Advances in Materials Science and Engineering. Advances in Materials Science and Engineering
125
135
.
Naveed Ahmed, Saqib Anwar, Kashif Ishfaq, Madiha Rafaqat, Mustafa Saleh & Shafiq Ahmad. (2019) The potentiality of sinking EDM for micro-impressions on Ti-6Al-4V: keeping the geometrical errors (axial and radial) and other machining measures (tool erosion and work roughness) at minimum. Scientific Reports 9:1.
Crossref
Crossref