Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 34, 2019 - Issue 3
Submit an article Journal homepage
503
Views
55
CrossRef citations to date
0
Altmetric
Articles

Experimental investigation on drilling of natural flax fiber-reinforced composites

H. Rezghi MalekiSchool of Mechanical Engineering, University of Tehran, Tehran, Iran;Department of Mechanical Engineering, University of Bonab, Bonab, Iran
,
M. HamediSchool of Mechanical Engineering, University of Tehran, Tehran, IranCorrespondence[email protected]
,
M. KubouchiDepartment of Chemical Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Tokyo, Japan
&
Y. AraoDepartment of Chemical Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Tokyo, Japan
Pages 283-292 | Received 22 Apr 2018, Accepted 07 Aug 2018, Published online: 08 Nov 2018

Citations (55)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (16)

Burak Ozdemir, Erol Kilickap, Erkan Bahce, Ahmet Yardimeden & Ender Emir. (2024) Optimization of parameters for drilling composite materials with freeform surfaces. Materials and Manufacturing Processes 39:1, pages 55-68.
Read now
Deepak Kaushik & Inderdeep Singh. (2023) Analysis of drilling behavior of flax/PP composites. Materials and Manufacturing Processes 0:0, pages 1-13.
Read now
Sarukasan D & Thirumavalavan Krishnamurthy. (2023) An investigation of basalt/E-glass hybrid composite pipe on drilling using Box–Behnken design. Materials and Manufacturing Processes 38:9, pages 1104-1118.
Read now
Burak Özdemir, Ahmet Yardimeden, Erkan Bahce, Erol Kilickap & Ender Emir. (2023) Analysis of Drilling Behaviour in Jute Fibres Reinforced Natural Composites. Journal of Natural Fibers 20:1.
Read now
Chandrashekhar Jawalkar & Suman Kant. (2023) Study on Mechanical Properties and Delamination Factor Evaluation of Chemically Treated Nettle Fiber Reinforced Polymer Composites. Journal of Natural Fibers 20:1.
Read now
Khurshid Malik, Faiz Ahmad & Ebru Gunister. (2022) Drilling Performance of Natural Fiber Reinforced Polymer Composites: A Review. Journal of Natural Fibers 19:12, pages 4761-4779.
Read now
Braedon Hoekstra, Kamal Kolasangiani, Donatus C.D Oguamanam & Habiba Bougherara. (2022) Mechanical Characterization and Damage Analysis of Carbon/Flax Hybrid Laminates with Holes Machined by Abrasive Water Jet. Journal of Natural Fibers 19:13, pages 7073-7086.
Read now
Karthick Rasu & Anbumalar Veerabathiran. (2022) A Review on Drilling of Natural and Synthetic Fiber Reinforced Polymer Composites: 1992 - 2021. Journal of Natural Fibers 19:16, pages 15100-15115.
Read now
Fausto Tucci, Dominique Larrea-Wachtendorff, Giovanna Ferrari & Pierpaolo Carlone. (2022) Pulling force analysis in injection pultrusion of glass/epoxy composites. Materials and Manufacturing Processes 37:15, pages 1715-1726.
Read now
Raju Kumar Thakur & Kalyan Kumar Singh. (2022) Impact of MWCNT in CFRP composite during end milling process. Materials and Manufacturing Processes 37:7, pages 816-824.
Read now
Yahya Hışman Çelik & Mehmet Suat Alp. (2022) Determination of Milling Performance of Jute and Flax Fiber Reinforced Composites. Journal of Natural Fibers 19:2, pages 782-796.
Read now
M. Rajesh, K. Rajkumar & V. E Annamalai. (2021) Abrasive water jet machining on Ti metal-interleaved basalt-flax fiber laminate. Materials and Manufacturing Processes 36:3, pages 329-340.
Read now
Raveen John, Richard Lin, Krishnan Jayaraman & Debes Bhattacharyya. (2021) Effects of machining parameters on surface quality of composites reinforced with natural fibers. Materials and Manufacturing Processes 36:1, pages 73-83.
Read now
Isaac O. Igba & Solomon C. Nwigbo. (2020) Development of natural fibres reinforced composites for the production of orthopaedic cast. Journal of Medical Engineering & Technology 44:8, pages 498-507.
Read now
Sarah David-Müzel, Eduardo Pires Bonhin, Marcos Valério Ribeiro, Edson Cocchieri Botelho & Manoel Cléber de Sampaio Alves. (2020) Furfuryl resin/CNT/carbon fiber drilling, using carbide drill coated with Balinit-Helica. Materials and Manufacturing Processes 35:10, pages 1096-1103.
Read now
Fausto Tucci, Renato Bezerra, Felice Rubino & Pierpaolo Carlone. (2020) Multiphase flow simulation in injection pultrusion with variable properties. Materials and Manufacturing Processes 35:2, pages 152-162.
Read now

Articles from other publishers (39)

Aiqiu Wang, Ying Liu, Rui Yan, Yuye Wang, Pengjun Luo & Yangbo Li. (2023) Enhanced Dynamic Impact Resistance of 3D-Printed Continuous Optical Fiber-Reinforced Helicoidal Polylactic Acid Composites. Polymers 15:23, pages 4599.
Crossref
Shaofu Huang, Zhendong Fu, Chao Liu & Jun Li. (2023) Multi-objective optimization of fiber laser cutting quality characteristics of glass fiber reinforced plastic (GFRP) materials. Optics & Laser Technology 167, pages 109720.
Crossref
Thandavamoorthy Raja, Vinayagam Mohanavel, Palanivel Velmurugan, Kaliappan Seeniappan, Durgesh Pratap Singh, Sinouvassane Djearamane, Lai-Hock Tey, Ling Shing Wong, Saminathan Kayarohanam, Sami Al Obaid, Saleh Alfarraj & Subpiramaniyam Sivakumar. (2023) Fatigue behaviour of Kevlar/carbon/basalt fibre-reinforced SiC nanofiller particulate hybrid epoxy composite. e-Polymers 23:1.
Crossref
Shruti Sharma, Asokan Pappu & Shyam R. Asolekar. (2023) Sustainable recycling of paddy straw through development of short-fiber-reinforced composites: exploring gainful utilization of agricultural waste. Clean Technologies and Environmental Policy.
Crossref
S. Kaliappan, B. Arunadevi, N. Sateesh & B. Ch. Nookaraju. (2022) Effect of Amino Silane Grafted Cellulose and Kenaf Fibers in Mechanical, Impact Toughness and Drilling Characteristics of Epoxy Resin Composite. Silicon 15:7, pages 3149-3158.
Crossref
Emani Ram Sai Goutham, Shaik Sajeed Hussain, Chandrasekar Muthukumar, Senthilkumar Krishnasamy, T. Senthil Muthu Kumar, Carlo Santulli, Sivasubramanian Palanisamy, Jyotishkumar Parameswaranpillai & Naveen Jesuarockiam. (2023) Drilling Parameters and Post-Drilling Residual Tensile Properties of Natural-Fiber-Reinforced Composites: A Review. Journal of Composites Science 7:4, pages 136.
Crossref
Praveenkumara Jagadeesh, Sanjay Mavinkere Rangappa, Indran Suyambulingam, Suchart Siengchin, Madhu Puttegowda, Joseph Selvi Binoj, Sergey Gorbatyuk, Anish Khan, Mrityunjay Doddamani, Vincenzo Fiore & Marta María Moure Cuadrado. (2023) Drilling characteristics and properties analysis of fiber reinforced polymer composites: A comprehensive review. Heliyon 9:3, pages e14428.
Crossref
N. Pragadish, S. Kaliappan, L. Natrayan, M. Selvam, Pravin P. Patil & C.K. Arvinda Pandian. (2023) A Short Review on AWJM of Natural Fibre Reinforced Composite Materials. Applied Mechanics and Materials 912, pages 123-139.
Crossref
Ahmed Belaadi, Messaouda Boumaaza, Hassan Alshahrani & Mostefa Bourchak. (2023) Effect of jute fiber length on drilling performance of biocomposites: optimization comparison between RSM, ANN, and genetic algorithm. The International Journal of Advanced Manufacturing Technology 124:10, pages 3579-3599.
Crossref
Durvasulu Rajesh, Nagarajan Lenin, Robert Cep, Palanivel Anand & Muniyandy Elangovan. (2023) Enhancement of Thermal Behaviour of Flax with a Ramie Fibre-Reinforced Polymer Composite. Polymers 15:2, pages 350.
Crossref
Kasetty Nanda Kumar & G. Bharathiraja. (2023) A comparative study on surface roughness of a novel Snake grass fiber/Aluminium powder reinforced epoxy composite and Snake grass fiber epoxy composite. Materials Today: Proceedings 79, pages 113-117.
Crossref
Rampal, Gaurav Kumar, Sanjay Mavinkere Rangappa, Suchart Siengchin & Sunny Zafar. (2022) A review of recent advancements in drilling of fiber-reinforced polymer composites. Composites Part C: Open Access 9, pages 100312.
Crossref
M. Kumar, A. Tevatia & A. Dixit. (2022) Damage mechanisms and constitutive models for natural fiber‐based green composites: A review. Materialwissenschaft und Werkstofftechnik 53:9, pages 1072-1105.
Crossref
Gokul Kannan & Rajasekaran Thangaraju. (2022) Effect of industrial waste fly ash on the drilling characteristics of banana fiber residue reinforced polymer composites. Journal of Industrial Textiles 51:2_suppl, pages 2665S-2687S.
Crossref
Vijay Kumar Mahakur, Sumit Bhowmik & Promod Kumar Patowari. (2021) Machining parametric study on the natural fiber reinforced composites: A review. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:11, pages 6232-6249.
Crossref
K. Gajalakshmi, N. Senthilkumar & K. Palanikumar. (2022) Experimental analysis and optimization on machining of coated carbon fiber and nanoclay reinforced aluminum hybrid composites. Carbon Letters 32:3, pages 815-833.
Crossref
Muhammad Helmi Abdul Kudus, Mani Maran Ratnam & Hazizan Md Akil. (2021) Image processing method for delamination and fiber pull-out assessment during drilling of natural fiber composites. Journal of Reinforced Plastics and Composites 41:7-8, pages 309-327.
Crossref
Braedon Hoekstra, Atefeh Shekarian, Kamal Kolasangiani, Donatus C.D. Oguamanam, Redouane Zitoune & Habiba Bougherara. (2022) Effect of machining processes on the damage response and surface quality of open hole hybrid carbon/flax composites: An experimental study. Composite Structures 285, pages 115244.
Crossref
H. Rezghi Maleki, B. Abazadeh, Y. Arao & M. Kubouchi. (2022) Selection of an appropriate non-destructive testing method for evaluating drilling-induced delamination in natural fiber composites. NDT & E International 126, pages 102567.
Crossref
Aarti P. More. (2021) Flax fiber–based polymer composites: a review. Advanced Composites and Hybrid Materials 5:1, pages 1-20.
Crossref
A. Mohan Kumar, R. Parameshwaran, R. Rajasekar, C. Moganapriya & R. Manivannan. (2022) A Review on Drilling of Fiber-Reinforced Polymer Composites. Mechanics of Composite Materials 58:1, pages 97-112.
Crossref
Natalia Sienkiewicz, Midhun Dominic & Jyotishkumar Parameswaranpillai. (2022) Natural Fillers as Potential Modifying Agents for Epoxy Composition: A Review. Polymers 14:2, pages 265.
Crossref
MF Ameur, A Hadj Djilani, R Zitoune, Krishnaraj V, J Sheikh-Ahmad, L Toubal & H Bougherara. (2021) Experimental and numerical investigations of the damages induced while drilling flax/epoxy composite. Journal of Composite Materials 56:2, pages 295-312.
Crossref
V. Sivaprasath & N. Senthilkumar. (2022) Maximizing MRR during drilling PLA + CF biocomposite with spade drill and comparing the results with twist drill using statistical approach. Materials Today: Proceedings 69, pages 1242-1246.
Crossref
T. Rajmohan, K. Mohan, R. Prasath & S. Vijayabhaskar. 2022. Bio-Fiber Reinforced Composite Materials. Bio-Fiber Reinforced Composite Materials 339 359 .
A. Mohan Kumar, R. Rajasekar, P. Manoj Kumar, R. Parameshwaran, Alagar Karthick, V. Mohanavel, T. Sakthi & M. Muhibbullah. (2021) Investigation of Drilling Process Parameters of Palmyra Based Composite. Advances in Materials Science and Engineering 2021, pages 1-9.
Crossref
Mohamed Slamani, Nouha Karabibene, Jean-François Chatelain, Xavier Rimpault & Yves Beauchamp. (2021) Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design. Measurement 184, pages 109921.
Crossref
Mohamed Slamani, Nouha Karabibene, Jean-François Chatelain & Yves Beauchamp. (2021) Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation. International Journal of Material Forming 14:6, pages 1497-1510.
Crossref
Bachir Adda, Ahmed Belaadi, Messaouda Boumaaza & Mostefa Bourchak. (2021) Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators. The International Journal of Advanced Manufacturing Technology 116:9-10, pages 2885-2907.
Crossref
Shanmugam Vigneshwaran, KM John, R Deepak Joel Johnson, Marimuthu Uthayakumar, V Arumugaprabu & Sundaresan T Kumaran. (2020) Conventional and unconventional machining performance of natural fibre-reinforced polymer composites: A review. Journal of Reinforced Plastics and Composites 40:15-16, pages 553-567.
Crossref
Faissal Chegdani, Mohamed El Mansori & Amen-Allah Chebbi. (2021) Cutting behavior of flax fibers as reinforcement of biocomposite structures involving multiscale hygrometric shear. Composites Part B: Engineering 211, pages 108660.
Crossref
A. Díaz-Álvarez, J. Díaz-Álvarez, N. Feito & C. Santiuste. (2021) Drilling of biocomposite materials: Modelling and experimental validation. Simulation Modelling Practice and Theory 106, pages 102203.
Crossref
R. Bhoopathi & M. Ramesh. (2021) Optimization of drilling output responses of eggshell fillers reinforced hemp/glass fibres hybrid composites. Materials Today: Proceedings 46, pages 3245-3250.
Crossref
Dinh Son Tran, Victor Songmene, Anh Dung Ngo & Jules Kouam. (2020) Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers. The International Journal of Advanced Manufacturing Technology 110:11-12, pages 3423-3444.
Crossref
Amirhossein Lotfi, Huaizhong Li & Dzung Viet Dao. (2020) Analytical and experimental investigation of the parameters in drilling flax/poly(lactic acid) bio-composite laminates. The International Journal of Advanced Manufacturing Technology 109:1-2, pages 503-521.
Crossref
Fathi Masoud, S.M. Sapuan, Mohd Khairol Anuar Mohd Ariffin, Y. Nukman & Emin Bayraktar. (2020) Cutting Processes of Natural Fiber-Reinforced Polymer Composites. Polymers 12:6, pages 1332.
Crossref
Suraya Hamirudin Husin, Nurul Mohd Helmi, Nanang Fatchurrohman, Mebrahitom A. Gebremariam & Azmir Azhari. 2020. iMEC-APCOMS 2019. iMEC-APCOMS 2019 472 477 .
Ali Solati, Mohsen Hamedi & Majid Safarabadi. (2019) Combined GA-ANN approach for prediction of HAZ and bearing strength in laser drilling of GFRP composite. Optics & Laser Technology 113, pages 104-115.
Crossref
Ali Solati, Mohsen Hamedi & Majid Safarabadi. (2019) Comprehensive investigation of surface quality and mechanical properties in CO2 laser drilling of GFRP composites. The International Journal of Advanced Manufacturing Technology 102:1-4, pages 791-808.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.